@@ -573,6 +573,24 @@ static const struct coefficients vltg_coeff[4][4] = {
}
};
+static const char *cdns_torrent_get_phy_type(enum cdns_torrent_phy_type phy_type)
+{
+ switch (phy_type) {
+ case TYPE_DP:
+ return "DisplayPort";
+ case TYPE_PCIE:
+ return "PCIe";
+ case TYPE_SGMII:
+ return "SGMII";
+ case TYPE_QSGMII:
+ return "QSGMII";
+ case TYPE_USB:
+ return "USB";
+ default:
+ return "None";
+ }
+}
+
/*
* Set registers responsible for enabling and configuring SSC, with second and
* third register values provided by parameters.
@@ -2392,10 +2410,9 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev)
init_dp_regmap++;
}
- dev_info(dev, "%d lanes, max bit rate %d.%03d Gbps\n",
- cdns_phy->phys[node].num_lanes,
- cdns_phy->max_bit_rate / 1000,
- cdns_phy->max_bit_rate % 1000);
+ dev_dbg(dev, "DP max bit rate %d.%03d Gbps\n",
+ cdns_phy->max_bit_rate / 1000,
+ cdns_phy->max_bit_rate % 1000);
gphy->attrs.bus_width = cdns_phy->phys[node].num_lanes;
gphy->attrs.max_link_rate = cdns_phy->max_bit_rate;
@@ -2427,6 +2444,17 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev)
goto put_lnk_rst;
}
+ if (cdns_phy->nsubnodes > 1)
+ dev_dbg(dev, "Multi-link: %s (%d lanes) & %s (%d lanes)",
+ cdns_torrent_get_phy_type(cdns_phy->phys[0].phy_type),
+ cdns_phy->phys[0].num_lanes,
+ cdns_torrent_get_phy_type(cdns_phy->phys[1].phy_type),
+ cdns_phy->phys[1].num_lanes);
+ else
+ dev_dbg(dev, "Single link: %s (%d lanes)",
+ cdns_torrent_get_phy_type(cdns_phy->phys[0].phy_type),
+ cdns_phy->phys[0].num_lanes);
+
return 0;
put_child:
Add debug information in probe regarding PHY configuration parameters like single link or multilink protocol along with number of lanes used for each protocol link. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> --- drivers/phy/cadence/phy-cadence-torrent.c | 36 ++++++++++++++++++++--- 1 file changed, 32 insertions(+), 4 deletions(-)