diff mbox series

phy: phy-twl4030-usb: Disable PHY for suspend

Message ID 20210727104512.52968-1-tony@atomide.com
State Accepted
Commit 7481f91f1d7e8a004f19b55747d38a934119abe2
Headers show
Series phy: phy-twl4030-usb: Disable PHY for suspend | expand

Commit Message

Tony Lindgren July 27, 2021, 10:45 a.m. UTC
Since commit 88d26136a256 ("PM: Prevent runtime suspend during system
resume"), PM runtime will not let devices idle during system suspend.

This is because of the pm_runtime_get_noresume() call done in
device_prepare() that is not released until at device_complete() after
resume.

We must now disable the USB PHY in suspend if no USB cable is connected.

Cc: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/phy/ti/phy-twl4030-usb.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Vinod Koul Aug. 6, 2021, 12:02 p.m. UTC | #1
On 27-07-21, 13:45, Tony Lindgren wrote:
> Since commit 88d26136a256 ("PM: Prevent runtime suspend during system
> resume"), PM runtime will not let devices idle during system suspend.
> 
> This is because of the pm_runtime_get_noresume() call done in
> device_prepare() that is not released until at device_complete() after
> resume.
> 
> We must now disable the USB PHY in suspend if no USB cable is connected.

Applied, thanks
diff mbox series

Patch

diff --git a/drivers/phy/ti/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
--- a/drivers/phy/ti/phy-twl4030-usb.c
+++ b/drivers/phy/ti/phy-twl4030-usb.c
@@ -162,6 +162,8 @@  struct twl4030_usb {
 	atomic_t		connected;
 	bool			vbus_supplied;
 	bool			musb_mailbox_pending;
+	unsigned long		runtime_suspended:1;
+	unsigned long		needs_resume:1;
 
 	struct delayed_work	id_workaround_work;
 };
@@ -384,6 +386,9 @@  static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
 	WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
 }
 
+static int twl4030_usb_runtime_suspend(struct device *dev);
+static int twl4030_usb_runtime_resume(struct device *dev);
+
 static int __maybe_unused twl4030_usb_suspend(struct device *dev)
 {
 	struct twl4030_usb *twl = dev_get_drvdata(dev);
@@ -395,6 +400,10 @@  static int __maybe_unused twl4030_usb_suspend(struct device *dev)
 	 */
 	dev_dbg(twl->dev, "%s\n", __func__);
 	disable_irq(twl->irq);
+	if (!twl->runtime_suspended && !atomic_read(&twl->connected)) {
+		twl4030_usb_runtime_suspend(dev);
+		twl->needs_resume = 1;
+	}
 
 	return 0;
 }
@@ -405,9 +414,13 @@  static int __maybe_unused twl4030_usb_resume(struct device *dev)
 
 	dev_dbg(twl->dev, "%s\n", __func__);
 	enable_irq(twl->irq);
+	if (twl->needs_resume)
+		twl4030_usb_runtime_resume(dev);
 	/* check whether cable status changed */
 	twl4030_usb_irq(0, twl);
 
+	twl->runtime_suspended = 0;
+
 	return 0;
 }
 
@@ -422,6 +435,8 @@  static int __maybe_unused twl4030_usb_runtime_suspend(struct device *dev)
 	regulator_disable(twl->usb1v8);
 	regulator_disable(twl->usb3v1);
 
+	twl->runtime_suspended = 1;
+
 	return 0;
 }