@@ -1100,6 +1100,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
if (ret) {
dev_err(rphy->dev, "failed to init irq for host port\n");
goto out;
+ }
if (!IS_ERR(rphy->edev)) {
rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1509,6 +1510,69 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
{ /* sentinel */ }
};
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+ {
+ .reg = 0xfe8a0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0080, 2, 2, 0, 1 },
+ .bvalid_det_st = { 0x0084, 2, 2, 0, 1 },
+ .bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+ .utmi_avalid = { 0x00c0, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x00c0, 9, 9, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ /* Select suspend control from controller */
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0000, 3, 0, 5, 1 },
+ .cp_det = { 0x00c0, 24, 24, 0, 1 },
+ .dcp_det = { 0x00c0, 23, 23, 0, 1 },
+ .dp_det = { 0x00c0, 25, 25, 0, 1 },
+ .idm_sink_en = { 0x0008, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0008, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0008, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0008, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0008, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0008, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0xfe8b0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .utmi_ls = { 0x00c0, 5, 4, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 7, 7, 0, 1 }
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
{
.reg = 0x100,
@@ -1558,6 +1622,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+ { .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
{}
};
The rk3568 usb2phy is a standalone device with a single muxed interrupt. Add support for the registers to the usb2phy driver. Signed-off-by: Peter Geis <pgwipeout@gmail.com> --- drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 65 +++++++++++++++++++ 1 file changed, 65 insertions(+)