@@ -108,6 +108,14 @@ config RESET_LANTIQ
help
This enables the reset controller driver for Lantiq / Intel XWAY SoCs.
+config RESET_LAN966X
+ bool "Microchip LAN966X Reset Driver"
+ depends on HAS_IOMEM || COMPILE_TEST
+ default y if LAN966X_SWITCH
+ select MFD_SYSCON
+ help
+ This driver supports switch core reset for the Microchip LAN966X SoC.
+
config RESET_LPC18XX
bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
default ARCH_LPC18XX
@@ -14,6 +14,7 @@ obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o
obj-$(CONFIG_RESET_K210) += reset-k210.o
+obj-$(CONFIG_RESET_LAN966X) += reset-lan966x.o
obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
new file mode 100644
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2021 Microchip Technology Inc. and its subsidiaries. */
+
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#define PROTECT_REG 0x88
+#define PROTECT_BIT BIT(5)
+#define SOFT_RESET_REG 0x00
+#define SOFT_RESET_BIT BIT(1)
+#define CHIP_COMMON_REG 0x10
+#define CHIP_COMMON_BIT BIT(0)
+
+struct mchp_reset_context {
+ struct regmap *cpu_ctrl;
+ struct regmap *switch_ctrl;
+ struct regmap *chip_ctrl;
+ struct reset_controller_dev rcdev;
+};
+
+static int lan966x_switch_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mchp_reset_context *ctx =
+ container_of(rcdev, struct mchp_reset_context, rcdev);
+ u32 val;
+ int ret;
+
+ /* Make sure the core is PROTECTED from reset */
+ regmap_update_bits(ctx->cpu_ctrl, PROTECT_REG, PROTECT_BIT, PROTECT_BIT);
+
+ /* Start soft reset */
+ regmap_write(ctx->switch_ctrl, SOFT_RESET_REG, SOFT_RESET_BIT);
+
+ /* Wait for soft reset done */
+ ret = regmap_read_poll_timeout(ctx->switch_ctrl, SOFT_RESET_REG, val,
+ (val & SOFT_RESET_BIT) == 0, 1, 100);
+ if (ret)
+ return ret;
+
+ /* Release the reset of internal PHY */
+ regmap_update_bits(ctx->chip_ctrl, CHIP_COMMON_REG, CHIP_COMMON_BIT,
+ CHIP_COMMON_BIT);
+
+ return 0;
+}
+
+static const struct reset_control_ops lan966x_reset_ops = {
+ .reset = lan966x_switch_reset,
+};
+
+static int mchp_lan966x_map_syscon(struct platform_device *pdev, char *name,
+ struct regmap **target)
+{
+ struct device_node *syscon_np;
+ struct regmap *regmap;
+ int err;
+
+ syscon_np = of_parse_phandle(pdev->dev.of_node, name, 0);
+ if (!syscon_np)
+ return -ENODEV;
+ regmap = syscon_node_to_regmap(syscon_np);
+ of_node_put(syscon_np);
+ if (IS_ERR(regmap)) {
+ err = PTR_ERR(regmap);
+ dev_err(&pdev->dev, "No '%s' map: %d\n", name, err);
+ return err;
+ }
+
+ *target = regmap;
+ return 0;
+}
+
+static int mchp_lan966x_reset_probe(struct platform_device *pdev)
+{
+ struct device_node *dn = pdev->dev.of_node;
+ struct mchp_reset_context *ctx;
+ int err;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ err = mchp_lan966x_map_syscon(pdev, "cpu-syscon", &ctx->cpu_ctrl);
+ if (err)
+ return err;
+
+ err = mchp_lan966x_map_syscon(pdev, "switch-syscon", &ctx->switch_ctrl);
+ if (err)
+ return err;
+
+ err = mchp_lan966x_map_syscon(pdev, "chip-syscon", &ctx->chip_ctrl);
+ if (err)
+ return err;
+
+ ctx->rcdev.owner = THIS_MODULE;
+ ctx->rcdev.nr_resets = 1;
+ ctx->rcdev.ops = &lan966x_reset_ops;
+ ctx->rcdev.of_node = dn;
+
+ return devm_reset_controller_register(&pdev->dev, &ctx->rcdev);
+}
+
+static const struct of_device_id mchp_lan966x_reset_of_match[] = {
+ {
+ .compatible = "microchip,lan966x-switch-reset",
+ },
+ { }
+};
+
+static struct platform_driver mchp_lan966x_reset_driver = {
+ .probe = mchp_lan966x_reset_probe,
+ .driver = {
+ .name = "lan966x-switch-reset",
+ .of_match_table = mchp_lan966x_reset_of_match,
+ },
+};
+
+static int __init mchp_lan966x_reset_init(void)
+{
+ return platform_driver_register(&mchp_lan966x_reset_driver);
+}
+
+postcore_initcall(mchp_lan966x_reset_init);
The lan966x switch SoC has a number of components that can be reset indiviually, but at least the switch core needs to be in a well defined state at power on, when any of the lan966x drivers starts to access the switch core, this reset driver is available. The reset driver is loaded early via the postcore_initcall interface, and will then be available for the other lan966x drivers (SGPIO, SwitchDev etc) that are loaded next, and the first of them to be loaded can perform the one-time switch core reset that is needed. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> --- drivers/reset/Kconfig | 8 +++ drivers/reset/Makefile | 1 + drivers/reset/reset-lan966x.c | 128 ++++++++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) create mode 100644 drivers/reset/reset-lan966x.c