@@ -22,6 +22,12 @@
#define AM33XX_GMII_SEL_MODE_RMII 1
#define AM33XX_GMII_SEL_MODE_RGMII 2
+/* J72xx SoC specific definitions for the CONTROL port */
+#define J72XX_GMII_SEL_MODE_QSGMII 4
+#define J72XX_GMII_SEL_MODE_QSGMII_SUB 6
+
+#define PHY_GMII_PORT(n) BIT((n) - 1)
+
enum {
PHY_GMII_SEL_PORT_MODE = 0,
PHY_GMII_SEL_RGMII_ID_MODE,
@@ -43,6 +49,7 @@ struct phy_gmii_sel_soc_data {
u32 features;
const struct reg_field (*regfields)[PHY_GMII_SEL_LAST];
bool use_of_data;
+ u64 extra_modes;
};
struct phy_gmii_sel_priv {
@@ -53,6 +60,7 @@ struct phy_gmii_sel_priv {
struct phy_gmii_sel_phy_priv *if_phys;
u32 num_ports;
u32 reg_offset;
+ u32 qsgmii_main_port;
};
static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
@@ -88,10 +96,17 @@ static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
gmii_sel_mode = AM33XX_GMII_SEL_MODE_MII;
break;
+ case PHY_INTERFACE_MODE_QSGMII:
+ if (!(soc_data->extra_modes & BIT(PHY_INTERFACE_MODE_QSGMII)))
+ goto unsupported;
+ if (if_phy->priv->qsgmii_main_port & BIT(if_phy->id - 1))
+ gmii_sel_mode = J72XX_GMII_SEL_MODE_QSGMII;
+ else
+ gmii_sel_mode = J72XX_GMII_SEL_MODE_QSGMII_SUB;
+ break;
+
default:
- dev_warn(dev, "port%u: unsupported mode: \"%s\"\n",
- if_phy->id, phy_modes(submode));
- return -EINVAL;
+ goto unsupported;
}
if_phy->phy_if_mode = submode;
@@ -123,6 +138,11 @@ static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
}
return 0;
+
+unsupported:
+ dev_warn(dev, "port%u: unsupported mode: \"%s\"\n",
+ if_phy->id, phy_modes(submode));
+ return -EINVAL;
}
static const
@@ -188,6 +208,13 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am654 = {
.regfields = phy_gmii_sel_fields_am654,
};
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
+ .use_of_data = true,
+ .regfields = phy_gmii_sel_fields_am654,
+ .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
+};
+
static const struct of_device_id phy_gmii_sel_id_table[] = {
{
.compatible = "ti,am3352-phy-gmii-sel",
@@ -209,6 +236,10 @@ static const struct of_device_id phy_gmii_sel_id_table[] = {
.compatible = "ti,am654-phy-gmii-sel",
.data = &phy_gmii_sel_soc_am654,
},
+ {
+ .compatible = "ti,j7200-cpsw5g-phy-gmii-sel",
+ .data = &phy_gmii_sel_cpsw5g_soc_j7200,
+ },
{}
};
MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table);
@@ -363,6 +394,8 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
priv->dev = &pdev->dev;
priv->soc_data = of_id->data;
priv->num_ports = priv->soc_data->num_ports;
+ priv->qsgmii_main_port = PHY_GMII_PORT(1);
+ of_property_read_u32(node, "ti,enet-ctrl-qsgmii", &priv->qsgmii_main_port);
priv->regmap = syscon_node_to_regmap(node->parent);
if (IS_ERR(priv->regmap)) {
Each of the CPSW5G ports in J7200 support additional modes like QSGMII. Add a new compatible for J7200 to support the additional modes. In TI's J7200, each of the CPSW5G ethernet interfaces can act as a QSGMII or QSGMII-SUB port. The QSGMII interface is responsible for performing auto-negotiation between the MAC and the PHY while the rest of the interfaces are designated as QSGMII-SUB interfaces, indicating that they will not be taking part in the auto-negotiation process. To indicate the interface which will serve as the main QSGMII interface, add a property "ti,enet-ctrl-qsgmii", whose value indicates the port number of the interface which shall serve as the main QSGMII interface. The rest of the interfaces are then assigned QSGMII-SUB mode by default. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> --- drivers/phy/ti/phy-gmii-sel.c | 39 ++++++++++++++++++++++++++++++++--- 1 file changed, 36 insertions(+), 3 deletions(-)