@@ -42,6 +42,128 @@ qos_sata0: qos@fe190200 {
reg = <0x0 0xfe190200 0x0 0x20>;
};
+ pcie30_phy_grf: syscon@fdcb8000 {
+ compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon";
+ reg = <0x0 0xfdcb8000 0x0 0x10000>;
+ };
+
+ pcie30phy: phy@fe8c0000 {
+ compatible = "rockchip,rk3568-pcie3-phy";
+ reg = <0x0 0xfe8c0000 0x0 0x20000>;
+ #phy-cells = <0>;
+ clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>,
+ <&cru PCLK_PCIE30PHY>;
+ clock-names = "refclk_m", "refclk_n", "pclk";
+ resets = <&cru SRST_PCIE30PHY>;
+ reset-names = "phy";
+ rockchip,phy-grf = <&pcie30_phy_grf>;
+ status = "disabled";
+ };
+
+ pcie3x1: pcie@fe270000 {
+ compatible = "rockchip,rk3568-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
+ <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
+ <&cru CLK_PCIE30X1_AUX_NDFT>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk", "aux";
+ device_type = "pci";
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie3x1_intc 0>,
+ <0 0 0 2 &pcie3x1_intc 1>,
+ <0 0 0 3 &pcie3x1_intc 2>,
+ <0 0 0 4 &pcie3x1_intc 3>;
+ linux,pci-domain = <1>;
+ num-ib-windows = <6>;
+ num-ob-windows = <2>;
+ max-link-speed = <3>;
+ msi-map = <0x0 &gic 0x1000 0x1000>;
+ num-lanes = <1>;
+ phys = <&pcie30phy>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3568_PD_PIPE>;
+ reg = <0x3 0xc0400000 0x0 0x00400000>,
+ <0x0 0xfe270000 0x0 0x00010000>,
+ <0x3 0x7f000000 0x0 0x01000000>;
+ ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>,
+ <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>;
+ reg-names = "dbi", "apb", "config";
+ resets = <&cru SRST_PCIE30X1_POWERUP>;
+ reset-names = "pipe";
+ /* bifurcation; lane1 when using 1+1 */
+ status = "disabled";
+
+ pcie3x1_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ pcie3x2: pcie@fe280000 {
+ compatible = "rockchip,rk3568-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
+ <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
+ <&cru CLK_PCIE30X2_AUX_NDFT>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk", "aux";
+ device_type = "pci";
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+ <0 0 0 2 &pcie3x2_intc 1>,
+ <0 0 0 3 &pcie3x2_intc 2>,
+ <0 0 0 4 &pcie3x2_intc 3>;
+ linux,pci-domain = <2>;
+ num-ib-windows = <6>;
+ num-ob-windows = <2>;
+ max-link-speed = <3>;
+ msi-map = <0x0 &gic 0x2000 0x1000>;
+ num-lanes = <2>;
+ phys = <&pcie30phy>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3568_PD_PIPE>;
+ reg = <0x3 0xc0800000 0x0 0x00400000>,
+ <0x0 0xfe280000 0x0 0x00010000>,
+ <0x3 0xbf000000 0x0 0x01000000>;
+ ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>,
+ <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>;
+ reg-names = "dbi", "apb", "config";
+ resets = <&cru SRST_PCIE30X2_POWERUP>;
+ reset-names = "pipe";
+ /* bifurcation; lane0 when using 1+1 */
+ status = "disabled";
+
+ pcie3x2_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
gmac0: ethernet@fe2a0000 {
compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
reg = <0x0 0xfe2a0000 0x0 0x10000>;