@@ -921,6 +921,136 @@ int device_get_phy_mode(struct device *dev)
}
EXPORT_SYMBOL_GPL(device_get_phy_mode);
+/**
+ * fwnode_get_tx_p2p_amplitude - Get peak to peak transmit amplitude for given
+ * PHY mode
+ * @fwnode: Pointer to the given node
+ * @mode: Name of the PHY mode, or "default" / NULL
+ * @amplitude: Pointer where to store the amplitude
+ *
+ * Gets the peak to peak transmit amplitude in microvolts for a given PHY mode
+ * by parsing the 'tx-p2p-microvolt' and 'tx-p2p-microvolt-names' properties.
+ * If amplitude is not specified for @mode exactly, tries a more generic mode,
+ * and if that isn't specified, tries "default".
+ *
+ * For example if @mode is "pcie3", we first try searching for value
+ * corresponding to "pcie3", then to "pcie", and finally to "default".
+ *
+ * Return: %0 if the amplitude was read (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the required properties do not have a value,
+ * %-EPROTO if the property is not an array of strings,
+ * %-ENXIO if no suitable firmware interface is present,
+ * %-ENOMEM if out of memory.
+ */
+int fwnode_get_tx_p2p_amplitude(struct fwnode_handle *fwnode, const char *mode,
+ u32 *amplitude)
+{
+ static const char *names_prop = "tx-p2p-microvolt-names",
+ *vals_prop = "tx-p2p-microvolt";
+ const char **names;
+ int cnt, idx, ret;
+ u32 *vals;
+
+ cnt = fwnode_property_string_array_count(fwnode, names_prop);
+ if (!cnt || cnt == -EINVAL)
+ /*
+ * If the names property does not exist or is empty, we expect
+ * the values property to contain only one, default value.
+ */
+ return fwnode_property_read_u32(fwnode, vals_prop, amplitude);
+ else if (cnt < 0)
+ return cnt;
+
+ names = kcalloc(cnt, sizeof(*names), GFP_KERNEL);
+ if (!names)
+ return -ENOMEM;
+
+ ret = fwnode_property_read_string_array(fwnode, names_prop, names, cnt);
+ if (ret < 0) {
+ kfree(names);
+ return ret;
+ }
+
+ if (!mode)
+ mode = "default";
+
+ do {
+ static const char *gen_table[] = {
+ "pcie", "usb", "ufs-hs", "dp", "mipi-dphy",
+ };
+ size_t i;
+
+ idx = match_string(names, cnt, mode);
+ if (idx >= 0)
+ break;
+
+ /* If mode was not matched, try more generic mode */
+ for (i = 0; i < ARRAY_SIZE(gen_table); ++i) {
+ if (str_has_proper_prefix(mode, gen_table[i])) {
+ mode = gen_table[i];
+ break;
+ }
+ }
+
+ /* Or "default" */
+ if (i == ARRAY_SIZE(gen_table)) {
+ if (strcmp(mode, "default"))
+ mode = "default";
+ else
+ mode = NULL;
+ }
+ } while (mode);
+
+ kfree(names);
+
+ if (idx < 0)
+ return -ENODATA;
+
+ vals = kcalloc(cnt, sizeof(*vals), GFP_KERNEL);
+ if (!vals)
+ return -ENOMEM;
+
+ ret = fwnode_property_read_u32_array(fwnode, vals_prop, vals, cnt);
+ if (ret)
+ goto out;
+
+ *amplitude = vals[idx];
+out:
+ kfree(vals);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(fwnode_get_tx_p2p_amplitude);
+
+/**
+ * device_get_tx_p2p_amplitude - Get peak to peak transmit amplitude for given
+ * PHY mode
+ * @dev: Pointer to the given device
+ * @mode: Name of the PHY mode, or "default" / NULL
+ * @amplitude: Pointer where to store the amplitude
+ *
+ * Gets the peak to peak transmit amplitude in microvolts for a given PHY mode
+ * by parsing the 'tx-p2p-microvolt' and 'tx-p2p-microvolt-names' properties.
+ * If amplitude is not specified for @mode exactly, tries a more generic mode,
+ * and if that isn't specified, tries "default".
+ *
+ * For example if @mode is "pcie3", we first try searching for value
+ * corresponding to "pcie3", then to "pcie", and finally to "default".
+ *
+ * Return: %0 if the amplitude was read (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the required properties do not have a value,
+ * %-EPROTO if the property is not an array of strings,
+ * %-ENXIO if no suitable firmware interface is present,
+ * %-ENOMEM if out of memory.
+ */
+int device_get_tx_p2p_amplitude(struct device *dev, const char *mode,
+ u32 *amplitude)
+{
+ return fwnode_get_tx_p2p_amplitude(dev_fwnode(dev), mode, amplitude);
+}
+EXPORT_SYMBOL_GPL(device_get_tx_p2p_amplitude);
+
/**
* fwnode_iomap - Maps the memory mapped IO for a given fwnode
* @fwnode: Pointer to the firmware node
@@ -392,6 +392,11 @@ const void *device_get_match_data(struct device *dev);
int device_get_phy_mode(struct device *dev);
int fwnode_get_phy_mode(struct fwnode_handle *fwnode);
+int fwnode_get_tx_p2p_amplitude(struct fwnode_handle *fwnode, const char *mode,
+ u32 *amplitude);
+int device_get_tx_p2p_amplitude(struct device *dev, const char *mode,
+ u32 *amplitude);
+
void __iomem *fwnode_iomap(struct fwnode_handle *fwnode, int index);
struct fwnode_handle *fwnode_graph_get_next_endpoint(
Add functions fwnode_get_tx_p2p_amplitude() and device_get_tx_p2p_amplitude() that parse the 'tx-p2p-microvolt' and 'tx-p2p-microvolt-names' properties and return peak to peak transmit amplitude in microvolts for given PHY mode. The functions search for mode name in 'tx-p2p-microvolt-names' property, and return amplitude at the corresponding index in the 'tx-p2p-microvolt' property. If given mode is not matched in 'tx-p2p-microvolt-names' array, the mode name is generalized (for example "pcie3" -> "pcie" -> "default", or "usb-ss" -> "usb" -> "default"). If the 'tx-p2p-microvolt-names' is not present, the 'tx-p2p-microvolt' property is expected to contain only one value, which is considered default, and will be returned for any mode. Signed-off-by: Marek Behún <kabel@kernel.org> --- Andy et al. can I get Ack for this if this is okay? --- drivers/base/property.c | 130 +++++++++++++++++++++++++++++++++++++++ include/linux/property.h | 5 ++ 2 files changed, 135 insertions(+)