[06/16] phy: qcom-qmp-pcie-msm8996: drop unused defines

Commit Message

Johan Hovold Sept. 7, 2022, 11:07 a.m. UTC

Drop defines and enums that are unused since the QMP driver split.

Signed-off-by: Johan Hovold <[e-mail]>
---
 .../phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c  | 27 +------------------
 1 file changed, 1 insertion(+), 26 deletions(-)

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
index a5b9a81541c4..49df846c31e6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -36,35 +36,13 @@ 
 /* QPHY_PCS_STATUS bit */
 #define PHYSTATUS				BIT(6)
 #define PHYSTATUS_4_20				BIT(7)
-/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
+/* QPHY_COM_PCS_READY_STATUS bit */
 #define PCS_READY				BIT(0)
 
-/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
-/* DP PHY soft reset */
-#define SW_DPPHY_RESET				BIT(0)
-/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
-#define SW_DPPHY_RESET_MUX			BIT(1)
-/* USB3 PHY soft reset */
-#define SW_USB3PHY_RESET			BIT(2)
-/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
-#define SW_USB3PHY_RESET_MUX			BIT(3)
-
-/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
-#define USB3_MODE				BIT(0) /* enables USB3 mode */
-#define DP_MODE					BIT(1) /* enables DP mode */
-
-/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
-#define CLAMP_EN				BIT(0) /* enables i/o clamp_n */
-
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
 #define POWER_DOWN_DELAY_US_MIN			10
 #define POWER_DOWN_DELAY_US_MAX			11
 
-#define MAX_PROP_NAME				32
-
-/* Define the assumed distance between lanes for underspecified device trees. */
-#define QMP_PHY_LEGACY_LANE_STRIDE		0x400
-
 struct qmp_phy_init_tbl {
 	unsigned int offset;
 	unsigned int val;
@@ -112,11 +90,8 @@  enum qphy_reg_layout {
 	/* PCS registers */
 	QPHY_SW_RESET,
 	QPHY_START_CTRL,
-	QPHY_PCS_READY_STATUS,
 	QPHY_PCS_STATUS,
 	QPHY_PCS_POWER_DOWN_CONTROL,
-	/* PCS_MISC registers */
-	QPHY_PCS_MISC_TYPEC_CTRL,
 	/* Keep last to ensure regs_layout arrays are properly initialized */
 	QPHY_LAYOUT_SIZE
 };