diff mbox series

[v2,07/11] phy: qcom-qmp-combo: clean up power-down handling

Message ID 20220929092916.23068-8-johan+linaro@kernel.org
State Accepted
Commit 2e52ddf045a08fcae8dc4c88d10aa01252dd4165
Headers show
Series phy: qcom-qmp: more fixes and cleanups | expand

Commit Message

Johan Hovold Sept. 29, 2022, 9:29 a.m. UTC 
Always define the POWER_DOWN_CONTROL register instead of falling back to
the v2 (and v3) offset during power on and power off.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

Comments

Dmitry Baryshkov Sept. 29, 2022, 10:08 a.m. UTC | #1 
On Thu, 29 Sept 2022 at 12:29, Johan Hovold <johan+linaro@kernel.org> wrote:
>
> Always define the POWER_DOWN_CONTROL register instead of falling back to
> the v2 (and v3) offset during power on and power off.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 19 +++++--------------
>  1 file changed, 5 insertions(+), 14 deletions(-)



--
With best wishes
Dmitry
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index e618e675e8ec..5665eb3c1556 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -121,6 +121,7 @@  static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
 	[QPHY_PCS_STATUS]		= 0x174,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
 	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d8,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0dc,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
@@ -1991,13 +1992,8 @@  static int qmp_combo_com_init(struct qmp_phy *qphy)
 	qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
 	qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
 
-	if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
-		qphy_setbits(pcs,
-				cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
-				cfg->pwrdn_ctrl);
-	else
-		qphy_setbits(pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
-				cfg->pwrdn_ctrl);
+	qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+			cfg->pwrdn_ctrl);
 
 	mutex_unlock(&qmp->phy_mutex);
 
@@ -2144,13 +2140,8 @@  static int qmp_combo_power_off(struct phy *phy)
 		qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
 
 		/* Put PHY into POWER DOWN state: active low */
-		if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
-			qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
-				     cfg->pwrdn_ctrl);
-		} else {
-			qphy_clrbits(qphy->pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
-					cfg->pwrdn_ctrl);
-		}
+		qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+				cfg->pwrdn_ctrl);
 	}
 
 	return 0;