diff mbox series

[v2,08/14] phy: qcom-qmp-pcie: drop power-down delay config

Message ID 20221012081241.18273-9-johan+linaro@kernel.org
State Accepted
Commit e71906144b432135b483e228d65be59fbb44c310
Headers show
Series phy: qcom-qmp: further prep cleanups | expand

Commit Message

Johan Hovold Oct. 12, 2022, 8:12 a.m. UTC
The power-down delay was included in the first version of the QMP driver
as an optional delay after powering on the PHY (using
POWER_DOWN_CONTROL) and just before starting it. Later changes modified
this sequence by powering on before initialising the PHY, but the
optional delay stayed where it was (i.e. before starting the PHY).

The vendor driver does not use a delay before starting the PHY and this
is likely not needed on any platform unless there is a corresponding
delay in the vendor kernel init sequence tables (i.e. in devicetree).

Let's keep the delay for now, but drop the redundant delay period
configuration while increasing the unnecessarily low timer slack
somewhat.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 27 +-----------------------
 1 file changed, 1 insertion(+), 26 deletions(-)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index fa8bc6aeedf1..315de484f875 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1362,9 +1362,6 @@  struct qmp_phy_cfg {
 
 	/* true, if PHY needs delay after POWER_DOWN */
 	bool has_pwrdn_delay;
-	/* power_down delay in usec */
-	int pwrdn_delay_min;
-	int pwrdn_delay_max;
 
 	/* QMP PHY pipe clock interface rate */
 	unsigned long pipe_clock_rate;
@@ -1500,8 +1497,6 @@  static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
 	.phy_status		= PHYSTATUS,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 };
 
 static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = {
@@ -1529,8 +1524,6 @@  static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = {
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 
 	.pipe_clock_rate	= 250000000,
 };
@@ -1562,8 +1555,6 @@  static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 };
 
 static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
@@ -1594,8 +1585,6 @@  static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
 	.phy_status		= PHYSTATUS,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 };
 
 static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
@@ -1624,8 +1613,6 @@  static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
 	.phy_status		= PHYSTATUS,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 };
 
 static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
@@ -1666,8 +1653,6 @@  static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
 	.phy_status		= PHYSTATUS,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 };
 
 static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
@@ -1708,8 +1693,6 @@  static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
 	.phy_status		= PHYSTATUS,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 };
 
 static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
@@ -1765,8 +1748,6 @@  static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 };
 
 static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
@@ -1797,8 +1778,6 @@  static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
 	.phy_status		= PHYSTATUS_4_20,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 };
 
 static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
@@ -1829,8 +1808,6 @@  static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
 	.phy_status		= PHYSTATUS,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 };
 
 static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
@@ -1876,8 +1853,6 @@  static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
 	.phy_status		= PHYSTATUS_4_20,
 
 	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= 995,		/* us */
-	.pwrdn_delay_max	= 1005,		/* us */
 };
 
 static void qmp_pcie_configure_lane(void __iomem *base,
@@ -2037,7 +2012,7 @@  static int qmp_pcie_power_on(struct phy *phy)
 	qmp_pcie_pcs_init(qphy, mode_tables);
 
 	if (cfg->has_pwrdn_delay)
-		usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
+		usleep_range(1000, 1200);
 
 	/* Pull PHY out of reset state */
 	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);