@@ -1043,14 +1043,6 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
- .reset_list = sc7180_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v3_usb3phy_regs_layout,
-
.dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
.configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
@@ -1108,14 +1100,6 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v3_usb3phy_regs_layout,
-
.dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
.configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
@@ -1176,14 +1160,6 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v3_usb3phy_regs_layout,
-
.dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
@@ -1240,14 +1216,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3phy_regs_layout,
-
.dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
@@ -1308,14 +1276,6 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .clk_list = qmp_v4_sm8250_usbphy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3phy_regs_layout,
-
.dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
@@ -1911,8 +1871,8 @@ static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
static int qmp_combo_com_init(struct qmp_phy *qphy)
{
struct qcom_qmp *qmp = qphy->qmp;
- const struct qmp_phy_cfg *cfg = qphy->cfg;
struct qmp_phy *usb_phy = qmp->usb_phy;
+ const struct qmp_phy_cfg *cfg = usb_phy->cfg;
void __iomem *dp_com = qmp->dp_com;
int ret;
@@ -1964,7 +1924,7 @@ static int qmp_combo_com_init(struct qmp_phy *qphy)
qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
- qphy_setbits(usb_phy->pcs, usb_phy->cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ qphy_setbits(usb_phy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
SW_PWRDN);
mutex_unlock(&qmp->phy_mutex);
@@ -1984,7 +1944,8 @@ static int qmp_combo_com_init(struct qmp_phy *qphy)
static int qmp_combo_com_exit(struct qmp_phy *qphy)
{
struct qcom_qmp *qmp = qphy->qmp;
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_phy *usb_phy = qmp->usb_phy;
+ const struct qmp_phy_cfg *cfg = usb_phy->cfg;
mutex_lock(&qmp->phy_mutex);
if (--qmp->init_count) {
Commit 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy") added support for the DisplayPort part of QMP PHYs but unfortunately did so by duplicating parts of the shared configuration, something which has lead to subtle bugs depending on probe order. As the resources have always been requested based on the USB configuration, make sure to not rely on fields from the DP configuration when using them (e.g. in case they get out of sync) and remove the now unused fields from the DP configurations. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 47 ++--------------------- 1 file changed, 4 insertions(+), 43 deletions(-)