| Message ID | 20221111093857.11360-3-johan+linaro@kernel.org |
|---|---|
| State | Accepted |
| Commit | 3b41b61a2fe4174ba43fdb599c9d6accd35ac179 |
| Headers | show |
| Series | phy: qcom-qmp-usb: drop sc8280xp reference-clock source | expand |
On Fri, Nov 11, 2022 at 10:38:56AM +0100, Johan Hovold wrote: > The source clock for the reference clock is not used by the PHY directly > and should not be described by the devicetree (instead this relationship > should be modelled in the clock driver). > > Drop the driver management of the reference-clock source for SC8280XP. > > Once the other clock drivers have been updated, the corresponding change > can be done also for the other QMP v4 platforms. > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Regards, Bjorn > --- > drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 20 ++++++++++++-------- > 1 file changed, 12 insertions(+), 8 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > index 372f9853c749..9b1f8c9d0eb8 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > @@ -1523,6 +1523,10 @@ static const char * const qmp_v3_phy_clk_l[] = { > }; > > static const char * const qmp_v4_phy_clk_l[] = { > + "aux", "ref", "com_aux", > +}; > + > +static const char * const qmp_v4_ref_phy_clk_l[] = { > "aux", "ref_clk_src", "ref", "com_aux", > }; > > @@ -1729,8 +1733,8 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { > .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl), > .pcs_usb_tbl = sm8150_usb3_pcs_usb_tbl, > .pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl), > - .clk_list = qmp_v4_phy_clk_l, > - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), > + .clk_list = qmp_v4_ref_phy_clk_l, > + .num_clks = ARRAY_SIZE(qmp_v4_ref_phy_clk_l), > .reset_list = msm8996_usb3phy_reset_l, > .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > .vreg_list = qmp_phy_vreg_l, > @@ -1755,8 +1759,8 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { > .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl), > .pcs_usb_tbl = sm8150_usb3_uniphy_pcs_usb_tbl, > .pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_usb_tbl), > - .clk_list = qmp_v4_phy_clk_l, > - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), > + .clk_list = qmp_v4_ref_phy_clk_l, > + .num_clks = ARRAY_SIZE(qmp_v4_ref_phy_clk_l), > .reset_list = msm8996_usb3phy_reset_l, > .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > .vreg_list = qmp_phy_vreg_l, > @@ -1806,8 +1810,8 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { > .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl), > .pcs_usb_tbl = sm8250_usb3_uniphy_pcs_usb_tbl, > .pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_usb_tbl), > - .clk_list = qmp_v4_phy_clk_l, > - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), > + .clk_list = qmp_v4_ref_phy_clk_l, > + .num_clks = ARRAY_SIZE(qmp_v4_ref_phy_clk_l), > .reset_list = msm8996_usb3phy_reset_l, > .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > .vreg_list = qmp_phy_vreg_l, > @@ -1907,8 +1911,8 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { > .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl), > .pcs_usb_tbl = sm8350_usb3_uniphy_pcs_usb_tbl, > .pcs_usb_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_usb_tbl), > - .clk_list = qmp_v4_phy_clk_l, > - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), > + .clk_list = qmp_v4_ref_phy_clk_l, > + .num_clks = ARRAY_SIZE(qmp_v4_ref_phy_clk_l), > .reset_list = msm8996_usb3phy_reset_l, > .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > .vreg_list = qmp_phy_vreg_l, > -- > 2.37.4 >
On 11/11/2022 12:38, Johan Hovold wrote: > The source clock for the reference clock is not used by the PHY directly > and should not be described by the devicetree (instead this relationship > should be modelled in the clock driver). > > Drop the driver management of the reference-clock source for SC8280XP. > > Once the other clock drivers have been updated, the corresponding change > can be done also for the other QMP v4 platforms. It would be nice to also understand, how does this apply to the sm8250's usb+dp PHY, which has ref_clk_src, but no ref clock. Bjorn, any comments? Other than this question: Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index 372f9853c749..9b1f8c9d0eb8 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -1523,6 +1523,10 @@ static const char * const qmp_v3_phy_clk_l[] = { }; static const char * const qmp_v4_phy_clk_l[] = { + "aux", "ref", "com_aux", +}; + +static const char * const qmp_v4_ref_phy_clk_l[] = { "aux", "ref_clk_src", "ref", "com_aux", }; @@ -1729,8 +1733,8 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl), .pcs_usb_tbl = sm8150_usb3_pcs_usb_tbl, .pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl), - .clk_list = qmp_v4_phy_clk_l, - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .clk_list = qmp_v4_ref_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_ref_phy_clk_l), .reset_list = msm8996_usb3phy_reset_l, .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l, @@ -1755,8 +1759,8 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl), .pcs_usb_tbl = sm8150_usb3_uniphy_pcs_usb_tbl, .pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_usb_tbl), - .clk_list = qmp_v4_phy_clk_l, - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .clk_list = qmp_v4_ref_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_ref_phy_clk_l), .reset_list = msm8996_usb3phy_reset_l, .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l, @@ -1806,8 +1810,8 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl), .pcs_usb_tbl = sm8250_usb3_uniphy_pcs_usb_tbl, .pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_usb_tbl), - .clk_list = qmp_v4_phy_clk_l, - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .clk_list = qmp_v4_ref_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_ref_phy_clk_l), .reset_list = msm8996_usb3phy_reset_l, .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l, @@ -1907,8 +1911,8 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl), .pcs_usb_tbl = sm8350_usb3_uniphy_pcs_usb_tbl, .pcs_usb_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_usb_tbl), - .clk_list = qmp_v4_phy_clk_l, - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .clk_list = qmp_v4_ref_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_ref_phy_clk_l), .reset_list = msm8996_usb3phy_reset_l, .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l,
The source clock for the reference clock is not used by the PHY directly and should not be described by the devicetree (instead this relationship should be modelled in the clock driver). Drop the driver management of the reference-clock source for SC8280XP. Once the other clock drivers have been updated, the corresponding change can be done also for the other QMP v4 platforms. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)