@@ -802,7 +802,6 @@ struct qmp_phy;
struct qmp_phy_cfg {
/* phy-type - PCIE/UFS/USB */
unsigned int type;
- int lanes;
/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
const struct qmp_phy_init_tbl *serdes_tbl;
@@ -1010,7 +1009,6 @@ static const char * const sc7180_usb3phy_reset_l[] = {
static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
- .lanes = 2,
.serdes_tbl = qmp_v3_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
@@ -1033,7 +1031,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
@@ -1067,7 +1064,6 @@ static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
- .lanes = 2,
.serdes_tbl = qmp_v3_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
@@ -1090,7 +1086,6 @@ static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
.type = PHY_TYPE_DP,
- .lanes = 2,
.serdes_tbl = qmp_v3_dp_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
@@ -1124,7 +1119,6 @@ static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
- .lanes = 2,
.serdes_tbl = sm8150_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
@@ -1150,7 +1144,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
@@ -1184,7 +1177,6 @@ static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
.type = PHY_TYPE_USB3,
- .lanes = 2,
.serdes_tbl = sc8280xp_usb43dp_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_serdes_tbl),
@@ -1206,7 +1198,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v5_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
@@ -1240,7 +1231,6 @@ static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_cfg = {
static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.type = PHY_TYPE_USB3,
- .lanes = 2,
.serdes_tbl = sm8150_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
@@ -1266,7 +1256,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
@@ -2000,13 +1989,12 @@ static int qmp_combo_dp_power_on(struct phy *phy)
struct qmp_phy *qphy = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *tx = qphy->dp_tx;
+ void __iomem *tx2 = qphy->dp_tx2;
qmp_combo_dp_serdes_init(qphy);
qmp_combo_configure_lane(tx, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 1);
-
- if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->dp_tx2, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 2);
+ qmp_combo_configure_lane(tx2, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 2);
/* Configure special DP tx tunings */
cfg->configure_dp_tx(qphy);
@@ -2035,6 +2023,8 @@ static int qmp_combo_usb_power_on(struct phy *phy)
void __iomem *serdes = qphy->serdes;
void __iomem *tx = qphy->tx;
void __iomem *rx = qphy->rx;
+ void __iomem *tx2 = qphy->tx2;
+ void __iomem *rx2 = qphy->rx2;
void __iomem *pcs = qphy->pcs;
void __iomem *status;
unsigned int val;
@@ -2050,14 +2040,10 @@ static int qmp_combo_usb_power_on(struct phy *phy)
/* Tx, Rx, and PCS configurations */
qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
-
- if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ qmp_combo_configure_lane(tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
qmp_combo_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
-
- if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
+ qmp_combo_configure_lane(rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
@@ -2601,8 +2587,8 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int i
qphy->dp_serdes = serdes;
/*
* Get memory resources from the DP child node:
- * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
- * For dual lane PHYs: tx2 -> 3, rx2 -> 4
+ * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2;
+ * tx2 -> 3; rx2 -> 4
*
* Note that only tx/tx2 and pcs are used by the DP implementation.
*/
@@ -2614,11 +2600,9 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int i
if (IS_ERR(qphy->dp_pcs))
return PTR_ERR(qphy->dp_pcs);
- if (cfg->lanes >= 2) {
- qphy->dp_tx2 = devm_of_iomap(dev, np, 3, NULL);
- if (IS_ERR(qphy->dp_tx2))
- return PTR_ERR(qphy->dp_tx2);
- }
+ qphy->dp_tx2 = devm_of_iomap(dev, np, 3, NULL);
+ if (IS_ERR(qphy->dp_tx2))
+ return PTR_ERR(qphy->dp_tx2);
generic_phy = devm_phy_create(dev, np, &qmp_combo_dp_phy_ops);
if (IS_ERR(generic_phy)) {
@@ -2651,9 +2635,8 @@ static int qmp_combo_create_usb(struct device *dev, struct device_node *np, int
qphy->serdes = serdes;
/*
* Get memory resources from the USB child node:
- * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
- * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
- * For single lane PHYs: pcs_misc (optional) -> 3.
+ * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2;
+ * tx2 -> 3; rx2 -> 4; pcs_misc (optional) -> 5
*/
qphy->tx = devm_of_iomap(dev, np, 0, NULL);
if (IS_ERR(qphy->tx))
@@ -2670,20 +2653,15 @@ static int qmp_combo_create_usb(struct device *dev, struct device_node *np, int
if (cfg->pcs_usb_offset)
qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
- if (cfg->lanes >= 2) {
- qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
- if (IS_ERR(qphy->tx2))
- return PTR_ERR(qphy->tx2);
+ qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
+ if (IS_ERR(qphy->tx2))
+ return PTR_ERR(qphy->tx2);
- qphy->rx2 = devm_of_iomap(dev, np, 4, NULL);
- if (IS_ERR(qphy->rx2))
- return PTR_ERR(qphy->rx2);
-
- qphy->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
- } else {
- qphy->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
- }
+ qphy->rx2 = devm_of_iomap(dev, np, 4, NULL);
+ if (IS_ERR(qphy->rx2))
+ return PTR_ERR(qphy->rx2);
+ qphy->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
if (IS_ERR(qphy->pcs_misc)) {
dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
qphy->pcs_misc = NULL;
Since the QMP driver split there is really no need for the 'lanes' configuration parameter as all of these USB-C PHYs support dual-lane SuperSpeed USB and quad-lane (uni-directional) DP (even if the driver still only supports CC1 orientation using lanes 2 and 3). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 62 ++++++++--------------- 1 file changed, 20 insertions(+), 42 deletions(-)