| Message ID | 20230126135909.1624890-2-abel.vesa@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | sm8550: Add support for eUSB2 repeater | expand |
On Thu, 26 Jan 2023 15:59:03 +0200, Abel Vesa wrote: > The SM8550 SoC uses Synopsis eUSB2 repeater found in PM8550b. > Add a dt-binding schema for the new driver. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > .../phy/qcom,snps-eusb2-repeater.yaml | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.example.dtb: pmic@7: compatible:0: 'qcom,pm8550' is not one of ['qcom,pm6125', 'qcom,pm6150', 'qcom,pm6150l', 'qcom,pm6350', 'qcom,pm660', 'qcom,pm660l', 'qcom,pm7250b', 'qcom,pm7325', 'qcom,pm8004', 'qcom,pm8005', 'qcom,pm8009', 'qcom,pm8019', 'qcom,pm8028', 'qcom,pm8110', 'qcom,pm8150', 'qcom,pm8150b', 'qcom,pm8150c', 'qcom,pm8150l', 'qcom,pm8226', 'qcom,pm8350', 'qcom,pm8350b', 'qcom,pm8350c', 'qcom,pm8841', 'qcom,pm8909', 'qcom,pm8916', 'qcom,pm8941', 'qcom,pm8950', 'qcom,pm8953', 'qcom,pm8994', 'qcom,pm8998', 'qcom,pma8084', 'qcom,pmd9635', 'qcom,pmi8950', 'qcom,pmi8962', 'qcom,pmi8994', 'qcom,pmi8998', 'qcom,pmk8002', 'qcom,pmk8350', 'qcom,pmm8155au', 'qcom,pmp8074', 'qcom,pmr735a', 'qcom,pmr735b', 'qcom,pms405', 'qcom,pmx55', 'qcom,pmx65', 'qcom,smb2351'] From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.example.dtb: pmic@7: 'phy@fd00' does not match any of the regexes: '(.*)?(wled|leds)@[0-9a-f]+$', '^adc-tm@[0-9a-f]+$', '^adc@[0-9a-f]+$', '^audio-codec@[0-9a-f]+$', '^charger@[0-9a-f]+$', '^mpps@[0-9a-f]+$', '^rtc@[0-9a-f]+$', '^temp-alarm@[0-9a-f]+$', '^usb-detect@[0-9a-f]+$', '^usb-vbus-regulator@[0-9a-f]+$', '^vibrator@[0-9a-f]+$', 'gpio@[0-9a-f]+$', 'pinctrl-[0-9]+', 'pon@[0-9a-f]+$' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.example.dtb: /example-0/pmic@7: failed to match any schema with compatible: ['qcom,pm8550', 'qcom,spmi-pmic'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230126135909.1624890-2-abel.vesa@linaro.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml new file mode 100644 index 000000000000..3b99038be74e --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,snps-eusb2-repeater.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Synopsis eUSB2 to USB 2.0 repeater + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +properties: + compatible: + const: qcom,pm8550b-eusb2-repeater + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + vdd18-supply: true + + vdd3-supply: true + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + pm8550b: pmic@7 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550b_eusb2_repeater: phy@fd00 { + compatible = "qcom,pm8550b-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +...
The SM8550 SoC uses Synopsis eUSB2 repeater found in PM8550b. Add a dt-binding schema for the new driver. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- .../phy/qcom,snps-eusb2-repeater.yaml | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml