From patchwork Wed Feb 8 18:34:17 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Abel Vesa X-Patchwork-Id: 13133544 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 5398DC64EC5 for ; Wed, 8 Feb 2023 18:34:51 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=SkgD45rzBd50oKL92eqBSV4FnlH+9b/u5IF5K3jtiAw=; b=1zamcCB0VB4/7H dBQPsEoZxOsnRJH016mv35bEy4lcNQK0cAXJg5AhcDcFo8Pcq9ps65w4+Z/EJ2ZKI6CljgKCtSHxl 5yVlDRjHKO0tg3cCyp4L4ADhhaLkLsw4mcdT3qU+O2dMNcFxp5l+HNV0PoRW6K6Mw4KWuMQX7jDN8 Hc3th07l5WqwaGTeoKYp6eQZWkF4cDz7MW/rB9u2oxuuqth92+w3hB2uG/C4I47a6iHQDmyiLvq6H wOBhT5S92bHWAiUcYVvcnlVPhSXyIEJnsP0QlaplJ7X22473qZ6UU5pQT+b6hhES8ancb6cIFHB9R QmNAGew2n8dAsAvcFD9Q==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1pPpHO-00Gcgp-Ix; Wed, 08 Feb 2023 18:34:50 +0000 Received: from mail-wr1-x42b.google.com ([2a00:1450:4864:20::42b]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1pPpHL-00GcbU-1K for linux-phy@lists.infradead.org; Wed, 08 Feb 2023 18:34:49 +0000 Received: by mail-wr1-x42b.google.com with SMTP id bu23so1859724wrb.8 for ; Wed, 08 Feb 2023 10:34:38 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=RnxCgsidA3pJsf3grWiAFsJGamFbYvOfxrwCvWruQWY=; b=MJsINtXzaf85yZM4fsxUGf+kdk+OPU1voGndr3AixunCamgVN9lwWDQEHMKaF5JYdo eVTeCMIZdpwa/NjzAs8vyyPA58ODyp7jMkpTzlTRSfFJotbpRVSSrZ8RMlzqPdhaah4r 97j7MSBD5FH2EaGpUsA/8Z744oTgWxLMhlsIjnx2FwWlHPqtZ18qGIMNoawWXti3xg7f 9AX7BAmRKYm4uruA58JC5VQ3GilGoYdH7YdlLj2Mm0KVZTlnQefWEoNRdFwoQU/jiBgW sOfJ/t+TX5PB9SayP5gn8G7HsQfj8rBszIL9V6czYrfqzjGvmTvNlR4Q7Xx/D3omC703 bZ1A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=RnxCgsidA3pJsf3grWiAFsJGamFbYvOfxrwCvWruQWY=; b=zaLGNhAxl+DUTIEHq2RxSEFyGZZkf+2ib/bopFaXmaOqFm1X/g3UY8Euz7gY5MzgYU U7AR/WpuOSS/1do3+TEfVDwWt6JoHuZMXWG2aiSNZ41GbgCOlsfPuMi13qGSCNN5Qx2C iikTG7LOMvuuMjgoCf9F47RM/0CQyIFCb1/3zW5cnZptPtm3umsniSNob405Txkdx87L UDV1bimu0yRIRqGKtMv5FgrMt7ljV1WK1c+jxGXSetGNTtYAFEk/MPB2w9NA48Z1R+NR WNfAX+yI5b8l503tOa46Gy/OXET3+r7iCNL8lbAxRQauNs4kLM0Qd/NyFRcjmkBn5m27 LDDA== X-Gm-Message-State: AO0yUKWlKsgsiJB4YaDCh0BPi1sbVNr4PWA/DpXnKfE6EbuisN5xOwU+ pI1e2ri3x6s+VpKc3eiI+4EXLg== X-Google-Smtp-Source: AK7set/CAPTaqkHwaUuVMDhDDt15vCVeWjX9MnS9IxaXzn+NcJaoIkqllSczF6gEqggEY3MhQI3Zzg== X-Received: by 2002:adf:e481:0:b0:2c3:f188:23c3 with SMTP id i1-20020adfe481000000b002c3f18823c3mr7142089wrm.62.1675881276980; Wed, 08 Feb 2023 10:34:36 -0800 (PST) Received: from hackbox.lan ([94.52.112.99]) by smtp.gmail.com with ESMTPSA id v1-20020adf8b41000000b002be505ab59asm14591304wra.97.2023.02.08.10.34.35 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 08 Feb 2023 10:34:36 -0800 (PST) From: Abel Vesa To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , "vkoul@kernel.org" , Kishon Vijay Abraham I , Philipp Zabel , Johan Hovold Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Linux Kernel Mailing List , linux-phy@lists.infradead.org Subject: [PATCH v6 2/6] phy: qcom: Add QCOM SNPS eUSB2 driver Date: Wed, 8 Feb 2023 20:34:17 +0200 Message-Id: <20230208183421.2874423-3-abel.vesa@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230208183421.2874423-1-abel.vesa@linaro.org> References: <20230208183421.2874423-1-abel.vesa@linaro.org> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230208_103447_107055_4E59FE72 X-CRM114-Status: GOOD ( 20.39 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org The SM8550 SoC uses Synopsis eUSB2 PHY for USB 2.0. Add a new driver for it. The driver is based on a downstream implementation. Signed-off-by: Abel Vesa --- The v5 version of this patch was here: https://lore.kernel.org/all/20230207114024.944314-3-abel.vesa@linaro.org/ Changes since v5: * fixed checkpatch indentation warning for ref_clk_freq argument on "unsupported ref_clk_freq" error Changes since v4: * none Changes since v3: * none Changes since v2: * this time actually dropped the qcom_snps_, which I missed in the v2 * this time actually added the new lines after break in switch clause, as Vinod suggested, which I missed in the v2 Changes since v1: * replaced qualcomm with qcom in subject line * dropped all unnecessary includes * dropped qcom_snps prefix from qcom_snps_eusb2_hsphy_vreg_names * properly aligned the arguments for qcom_snps_eusb2_hsphy_write_mask * added empty lines after break in switch clause, like Vinod suggested drivers/phy/qualcomm/Kconfig | 9 + drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-snps-eusb2.c | 422 +++++++++++++++++++++ 3 files changed, 432 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-snps-eusb2.c diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index 62cf51aab1b8..513322cdf83c 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -112,6 +112,15 @@ config PHY_QCOM_QUSB2 PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. +config PHY_QCOM_SNPS_EUSB2 + tristate "Qualcomm SNPS eUSB2 PHY Driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm + chipsets. The PHY is paired with a Synopsys DWC3 USB controller + on Qualcomm SOCs. + config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 79dd4e507961..b2c01665622b 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_PHY_QCOM_QMP_UFS) += phy-qcom-qmp-ufs.o obj-$(CONFIG_PHY_QCOM_QMP_USB) += phy-qcom-qmp-usb.o obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o +obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o diff --git a/drivers/phy/qualcomm/phy-qcom-snps-eusb2.c b/drivers/phy/qualcomm/phy-qcom-snps-eusb2.c new file mode 100644 index 000000000000..40a421cf3dd9 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-snps-eusb2.c @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include + +#define USB_PHY_UTMI_CTRL0 (0x3c) +#define SLEEPM BIT(0) +#define OPMODE_MASK GENMASK(4, 3) +#define OPMODE_NONDRIVING BIT(3) + +#define USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define PHY_ENABLE BIT(0) +#define SIDDQ_SEL BIT(1) +#define SIDDQ BIT(2) +#define RETENABLEN BIT(3) +#define FSEL_MASK GENMASK(6, 4) +#define FSEL_19_2_MHZ_VAL (0x0) +#define FSEL_38_4_MHZ_VAL (0x4) + +#define USB_PHY_CFG_CTRL_1 (0x58) +#define PHY_CFG_PLL_CPBIAS_CNTRL_MASK GENMASK(7, 1) + +#define USB_PHY_CFG_CTRL_2 (0x5c) +#define PHY_CFG_PLL_FB_DIV_7_0_MASK GENMASK(7, 0) +#define DIV_7_0_19_2_MHZ_VAL (0x90) +#define DIV_7_0_38_4_MHZ_VAL (0xc8) + +#define USB_PHY_CFG_CTRL_3 (0x60) +#define PHY_CFG_PLL_FB_DIV_11_8_MASK GENMASK(3, 0) +#define DIV_11_8_19_2_MHZ_VAL (0x1) +#define DIV_11_8_38_4_MHZ_VAL (0x0) + +#define PHY_CFG_PLL_REF_DIV GENMASK(7, 4) +#define PLL_REF_DIV_VAL (0x0) + +#define USB_PHY_HS_PHY_CTRL2 (0x64) +#define VBUSVLDEXT0 BIT(0) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) +#define VBUS_DET_EXT_SEL BIT(4) + +#define USB_PHY_CFG_CTRL_4 (0x68) +#define PHY_CFG_PLL_GMP_CNTRL_MASK GENMASK(1, 0) +#define PHY_CFG_PLL_INT_CNTRL_MASK GENMASK(7, 2) + +#define USB_PHY_CFG_CTRL_5 (0x6c) +#define PHY_CFG_PLL_PROP_CNTRL_MASK GENMASK(4, 0) +#define PHY_CFG_PLL_VREF_TUNE_MASK GENMASK(7, 6) + +#define USB_PHY_CFG_CTRL_6 (0x70) +#define PHY_CFG_PLL_VCO_CNTRL_MASK GENMASK(2, 0) + +#define USB_PHY_CFG_CTRL_7 (0x74) + +#define USB_PHY_CFG_CTRL_8 (0x78) +#define PHY_CFG_TX_FSLS_VREF_TUNE_MASK GENMASK(1, 0) +#define PHY_CFG_TX_FSLS_VREG_BYPASS BIT(2) +#define PHY_CFG_TX_HS_VREF_TUNE_MASK GENMASK(5, 3) +#define PHY_CFG_TX_HS_XV_TUNE_MASK GENMASK(7, 6) + +#define USB_PHY_CFG_CTRL_9 (0x7c) +#define PHY_CFG_TX_PREEMP_TUNE_MASK GENMASK(2, 0) +#define PHY_CFG_TX_RES_TUNE_MASK GENMASK(4, 3) +#define PHY_CFG_TX_RISE_TUNE_MASK GENMASK(6, 5) +#define PHY_CFG_RCAL_BYPASS BIT(7) + +#define USB_PHY_CFG_CTRL_10 (0x80) + +#define USB_PHY_CFG0 (0x94) +#define DATAPATH_CTRL_OVERRIDE_EN BIT(0) +#define CMN_CTRL_OVERRIDE_EN BIT(1) + +#define UTMI_PHY_CMN_CTRL0 (0x98) +#define TESTBURNIN BIT(6) + +#define USB_PHY_FSEL_SEL (0xb8) +#define FSEL_SEL BIT(0) + +#define USB_PHY_APB_ACCESS_CMD (0x130) +#define RW_ACCESS BIT(0) +#define APB_START_CMD BIT(1) +#define APB_LOGIC_RESET BIT(2) + +#define USB_PHY_APB_ACCESS_STATUS (0x134) +#define ACCESS_DONE BIT(0) +#define TIMED_OUT BIT(1) +#define ACCESS_ERROR BIT(2) +#define ACCESS_IN_PROGRESS BIT(3) + +#define USB_PHY_APB_ADDRESS (0x138) +#define APB_REG_ADDR_MASK GENMASK(7, 0) + +#define USB_PHY_APB_WRDATA_LSB (0x13c) +#define APB_REG_WRDATA_7_0_MASK GENMASK(3, 0) + +#define USB_PHY_APB_WRDATA_MSB (0x140) +#define APB_REG_WRDATA_15_8_MASK GENMASK(7, 4) + +#define USB_PHY_APB_RDDATA_LSB (0x144) +#define APB_REG_RDDATA_7_0_MASK GENMASK(3, 0) + +#define USB_PHY_APB_RDDATA_MSB (0x148) +#define APB_REG_RDDATA_15_8_MASK GENMASK(7, 4) + +static const char * const eusb2_hsphy_vreg_names[] = { + "vdd", "vdda12", +}; + +#define EUSB2_NUM_VREGS ARRAY_SIZE(eusb2_hsphy_vreg_names) + +struct qcom_snps_eusb2_hsphy { + struct phy *phy; + void __iomem *base; + + struct clk *ref_clk; + struct reset_control *phy_reset; + + struct regulator_bulk_data vregs[EUSB2_NUM_VREGS]; + + enum phy_mode mode; +}; + +static int qcom_snps_eusb2_hsphy_set_mode(struct phy *p, enum phy_mode mode, int submode) +{ + struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); + + phy->mode = mode; + + return 0; +} + +static void qcom_snps_eusb2_hsphy_write_mask(void __iomem *base, u32 offset, + u32 mask, u32 val) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg &= ~mask; + reg |= val & mask; + writel_relaxed(reg, base + offset); + + /* Ensure above write is completed */ + readl_relaxed(base + offset); +} + +static void qcom_eusb2_default_parameters(struct qcom_snps_eusb2_hsphy *phy) +{ + /* default parameters: tx pre-emphasis */ + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, + PHY_CFG_TX_PREEMP_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0)); + + /* tx rise/fall time */ + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, + PHY_CFG_TX_RISE_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_RISE_TUNE_MASK, 0x2)); + + /* source impedance adjustment */ + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, + PHY_CFG_TX_RES_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_RES_TUNE_MASK, 0x1)); + + /* dc voltage level adjustement */ + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_8, + PHY_CFG_TX_HS_VREF_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_HS_VREF_TUNE_MASK, 0x3)); + + /* transmitter HS crossover adjustement */ + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_8, + PHY_CFG_TX_HS_XV_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_HS_XV_TUNE_MASK, 0x0)); +} + +static int qcom_eusb2_ref_clk_init(struct qcom_snps_eusb2_hsphy *phy) +{ + unsigned long ref_clk_freq = clk_get_rate(phy->ref_clk); + + switch (ref_clk_freq) { + case 19200000: + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, + FSEL_MASK, + FIELD_PREP(FSEL_MASK, FSEL_19_2_MHZ_VAL)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_2, + PHY_CFG_PLL_FB_DIV_7_0_MASK, + DIV_7_0_19_2_MHZ_VAL); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, + PHY_CFG_PLL_FB_DIV_11_8_MASK, + DIV_11_8_19_2_MHZ_VAL); + break; + + case 38400000: + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, + FSEL_MASK, + FIELD_PREP(FSEL_MASK, FSEL_38_4_MHZ_VAL)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_2, + PHY_CFG_PLL_FB_DIV_7_0_MASK, + DIV_7_0_38_4_MHZ_VAL); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, + PHY_CFG_PLL_FB_DIV_11_8_MASK, + DIV_11_8_38_4_MHZ_VAL); + break; + + default: + dev_err(&phy->phy->dev, "unsupported ref_clk_freq:%lu\n", ref_clk_freq); + return -EINVAL; + } + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, + PHY_CFG_PLL_REF_DIV, PLL_REF_DIV_VAL); + + return 0; +} + +static int qcom_snps_eusb2_hsphy_init(struct phy *p) +{ + struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs); + if (ret) + return ret; + + ret = clk_prepare_enable(phy->ref_clk); + if (ret) { + dev_err(&p->dev, "failed to enable ref clock, %d\n", ret); + goto disable_vreg; + } + + ret = reset_control_assert(phy->phy_reset); + if (ret) { + dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret); + goto disable_ref_clk; + } + + usleep_range(100, 150); + + ret = reset_control_deassert(phy->phy_reset); + if (ret) { + dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret); + goto disable_ref_clk; + } + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG0, + CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL5, POR, POR); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, + PHY_ENABLE | RETENABLEN, PHY_ENABLE | RETENABLEN); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_APB_ACCESS_CMD, + APB_LOGIC_RESET, APB_LOGIC_RESET); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, UTMI_PHY_CMN_CTRL0, TESTBURNIN, 0); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_FSEL_SEL, + FSEL_SEL, FSEL_SEL); + + /* update ref_clk related registers */ + ret = qcom_eusb2_ref_clk_init(phy); + if (ret) + goto disable_ref_clk; + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_1, + PHY_CFG_PLL_CPBIAS_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_CPBIAS_CNTRL_MASK, 0x1)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_4, + PHY_CFG_PLL_INT_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_INT_CNTRL_MASK, 0x8)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_4, + PHY_CFG_PLL_GMP_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_GMP_CNTRL_MASK, 0x1)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_5, + PHY_CFG_PLL_PROP_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_PROP_CNTRL_MASK, 0x10)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_6, + PHY_CFG_PLL_VCO_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_VCO_CNTRL_MASK, 0x0)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_5, + PHY_CFG_PLL_VREF_TUNE_MASK, + FIELD_PREP(PHY_CFG_PLL_VREF_TUNE_MASK, 0x1)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, + VBUS_DET_EXT_SEL, VBUS_DET_EXT_SEL); + + /* set default parameters */ + qcom_eusb2_default_parameters(phy); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL0, SLEEPM, SLEEPM); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, + SIDDQ_SEL, SIDDQ_SEL); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, + SIDDQ, 0); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL5, POR, 0); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL, 0); + + return 0; + +disable_ref_clk: + clk_disable_unprepare(phy->ref_clk); + +disable_vreg: + regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); + + return ret; +} + +static int qcom_snps_eusb2_hsphy_exit(struct phy *p) +{ + struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); + + clk_disable_unprepare(phy->ref_clk); + + regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); + + return 0; +} + +static const struct phy_ops qcom_snps_eusb2_hsphy_ops = { + .init = qcom_snps_eusb2_hsphy_init, + .exit = qcom_snps_eusb2_hsphy_exit, + .set_mode = qcom_snps_eusb2_hsphy_set_mode, + .owner = THIS_MODULE, +}; + +static int qcom_snps_eusb2_hsphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qcom_snps_eusb2_hsphy *phy; + struct phy_provider *phy_provider; + struct phy *generic_phy; + int ret, i; + int num; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->base)) + return PTR_ERR(phy->base); + + phy->phy_reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(phy->phy_reset)) + return PTR_ERR(phy->phy_reset); + + phy->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(phy->ref_clk)) + return dev_err_probe(dev, PTR_ERR(phy->ref_clk), + "failed to get ref clk\n"); + + num = ARRAY_SIZE(phy->vregs); + for (i = 0; i < num; i++) + phy->vregs[i].supply = eusb2_hsphy_vreg_names[i]; + + ret = devm_regulator_bulk_get(dev, num, phy->vregs); + if (ret) + return dev_err_probe(dev, ret, + "failed to get regulator supplies\n"); + generic_phy = devm_phy_create(dev, NULL, &qcom_snps_eusb2_hsphy_ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create phy %d\n", ret); + return PTR_ERR(generic_phy); + } + + dev_set_drvdata(dev, phy); + phy_set_drvdata(generic_phy, phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + dev_info(dev, "Registered Qcom-eUSB2 phy\n"); + + return 0; +} + +static const struct of_device_id qcom_snps_eusb2_hsphy_of_match_table[] = { + { .compatible = "qcom,sm8550-snps-eusb2-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_snps_eusb2_hsphy_of_match_table); + +static struct platform_driver qcom_snps_eusb2_hsphy_driver = { + .probe = qcom_snps_eusb2_hsphy_probe, + .driver = { + .name = "qcom-snps-eusb2-hsphy", + .of_match_table = qcom_snps_eusb2_hsphy_of_match_table, + }, +}; + +module_platform_driver(qcom_snps_eusb2_hsphy_driver); +MODULE_DESCRIPTION("Qualcomm SNPS eUSB2 HS PHY driver"); +MODULE_LICENSE("GPL");