diff mbox series

[23/31] phy: st: phy-stm32-usbphyc: Convert to platform remove callback returning void

Message ID 20230307115900.2293120-24-u.kleine-koenig@pengutronix.de
State Accepted
Commit 31d0d4e0222b69b33b93ee45637cc18c690449a3
Headers show
Series phy: Convert to platform remove callback returning void | expand

Commit Message

Uwe Kleine-König March 7, 2023, 11:58 a.m. UTC
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/phy/st/phy-stm32-usbphyc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index 5bb9647b078f..1add3b75f92f 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -766,7 +766,7 @@  static int stm32_usbphyc_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int stm32_usbphyc_remove(struct platform_device *pdev)
+static void stm32_usbphyc_remove(struct platform_device *pdev)
 {
 	struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev);
 	int port;
@@ -779,8 +779,6 @@  static int stm32_usbphyc_remove(struct platform_device *pdev)
 	stm32_usbphyc_clk48_unregister(usbphyc);
 
 	clk_disable_unprepare(usbphyc->clk);
-
-	return 0;
 }
 
 static int __maybe_unused stm32_usbphyc_resume(struct device *dev)
@@ -810,7 +808,7 @@  MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match);
 
 static struct platform_driver stm32_usbphyc_driver = {
 	.probe = stm32_usbphyc_probe,
-	.remove = stm32_usbphyc_remove,
+	.remove_new = stm32_usbphyc_remove,
 	.driver = {
 		.of_match_table = stm32_usbphyc_of_match,
 		.name = "stm32-usbphyc",