diff mbox series

[v2,2/3] phy: ti: gmii-sel: Enable SGMII mode for J7200

Message ID 20230309063514.398705-3-s-vadapalli@ti.com
State Accepted
Commit 178b65152149628a59d9805c11b18527141a2b7b
Headers show
Series PHY-GMII-SEL: Add support for SGMII mode | expand

Commit Message

Siddharth Vadapalli March 9, 2023, 6:35 a.m. UTC 
TI's J7200 SoC supports SGMII mode with the CPSW5G instance of the CPSW
Ethernet Switch. Thus, enable it by adding SGMII mode to the list of the
corresponding extra_modes member.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 drivers/phy/ti/phy-gmii-sel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index 5e16d8dd5bee..f3da6b020247 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -221,7 +221,7 @@  static const
 struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
 	.use_of_data = true,
 	.regfields = phy_gmii_sel_fields_am654,
-	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
+	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII),
 	.num_ports = 4,
 	.num_qsgmii_main_ports = 1,
 };