From patchwork Wed Mar 15 10:44:08 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Minda Chen X-Patchwork-Id: 13175586 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 11B6DC7618B for ; Wed, 15 Mar 2023 10:44:46 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=Zi2yoiH3SEY13vDoLr95JT/lQeh/ni/xsjfmOYwS+jg=; b=PTwiCZnC/58wi3 6c0T3xC8Heo23YoIqwK65uEcYzu1us3TZ2FgX0hkGSz7Ui5Z8HbCS9Qd1Sx0XmJbQAVotKHp+QwRb vlECshrpleFBDJEyF1KRLQYXL6W121NljMzAI2NMtFFu8sc7SBSb+t9ydezQE14ddalwl4+gCJ5uS 7/xM0vyO0wdS9TtXtinUvWer6Qebt/UhHufXfaupDpPEHynViENw+bdziOn4ozfyEWGejgaBBCB6z +ZSQT3GXbuaeUS5kFmkx51cM3NJMLgPK1teRL5MqSIVNbXJdYkqh1xh1ThBWSBOOYL1E8QJp7vEJf ylhNUA74j0jDMFUuWGUQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pcOcf-00D5xv-1x; Wed, 15 Mar 2023 10:44:45 +0000 Received: from fd01.gateway.ufhost.com ([61.152.239.71]) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pcOcY-00D5rF-1i; Wed, 15 Mar 2023 10:44:42 +0000 Received: from EXMBX166.cuchost.com (unknown [175.102.18.54]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client CN "EXMBX166", Issuer "EXMBX166" (not verified)) by fd01.gateway.ufhost.com (Postfix) with ESMTP id 7A8CB24E379; Wed, 15 Mar 2023 18:44:16 +0800 (CST) Received: from EXMBX071.cuchost.com (172.16.6.81) by EXMBX166.cuchost.com (172.16.6.76) with Microsoft SMTP Server (TLS) id 15.0.1497.42; Wed, 15 Mar 2023 18:44:16 +0800 Received: from ubuntu.localdomain (113.72.145.194) by EXMBX071.cuchost.com (172.16.6.81) with Microsoft SMTP Server (TLS) id 15.0.1497.42; Wed, 15 Mar 2023 18:44:15 +0800 From: Minda Chen To: Emil Renner Berthing , Conor Dooley , Vinod Koul , Kishon Vijay Abraham I , Rob Herring , Krzysztof Kozlowski , Pawel Laszczak , Greg Kroah-Hartman , Peter Chen , Roger Quadros , Philipp Zabel CC: , , , , , Paul Walmsley , Palmer Dabbelt , Albert Ou , "Minda Chen" Subject: [PATCH v3 2/5] phy: starfive: add JH7110 PCIE 2.0 and USB 2.0 PHY driver. Date: Wed, 15 Mar 2023 18:44:08 +0800 Message-ID: <20230315104411.73614-3-minda.chen@starfivetech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230315104411.73614-1-minda.chen@starfivetech.com> References: <20230315104411.73614-1-minda.chen@starfivetech.com> MIME-Version: 1.0 X-Originating-IP: [113.72.145.194] X-ClientProxiedBy: EXCAS066.cuchost.com (172.16.6.26) To EXMBX071.cuchost.com (172.16.6.81) X-YovoleRuleAgent: yovoleflag X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230315_034439_031638_8B06104C X-CRM114-Status: GOOD ( 22.97 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org Add Starfive JH7110 SoC PCIe 2.0 and USB 2.0 PHY driver support. PCIe 2.0 PHY can used as USB 3.0 PHY Signed-off-by: Minda Chen --- MAINTAINERS | 8 ++ drivers/phy/starfive/Kconfig | 22 ++++ drivers/phy/starfive/Makefile | 2 + drivers/phy/starfive/phy-jh7110-pcie.c | 136 ++++++++++++++++++++ drivers/phy/starfive/phy-jh7110-usb.c | 167 +++++++++++++++++++++++++ 5 files changed, 335 insertions(+) create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c diff --git a/MAINTAINERS b/MAINTAINERS index 8361b8e710ca..4263c005e45c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19977,6 +19977,14 @@ S: Supported F: Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml F: drivers/phy/starfive/phy-starfive-dphy-rx.c +STARFIVE JH71X0 PCIE AND USB PHY DRIVER +M: Emil Renner Berthing +M: Minda Chen +S: Supported +F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-pcie-phy.yaml +F: drivers/phy/starfive/phy-jh7110-pcie.c +F: drivers/phy/starfive/phy-jh7110-usb.c + STATIC BRANCH/CALL M: Peter Zijlstra M: Josh Poimboeuf diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig index e449a662acf5..dd0f139b5bfb 100644 --- a/drivers/phy/starfive/Kconfig +++ b/drivers/phy/starfive/Kconfig @@ -11,3 +11,25 @@ config PHY_STARFIVE_DPHY_RX Choose this option if you have a Starfive D-PHY in your system. If M is selected, the module will be called phy-starfive-dphy-rx. + +config PHY_STARFIVE_JH7110_USB + tristate "Starfive JH7110 USB 2.0 PHY support" + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this to support the StarFive USB 2.0 PHY, + used with the Cadence USB controller. + If M is selected, the module will be called + phy-jh7110-usb.ko. + +config PHY_STARFIVE_JH7110_PCIE + tristate "Starfive JH7110 PCIE 2.0/USB 3.0 PHY support" + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this to support the StarFive PCIe 2.0 PHY, + or used as USB 3.0 PHY. + If M is selected, the module will be called + phy-jh7110-pcie.ko. diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile index 7ec576cb30ae..c3eaf1b34cbb 100644 --- a/drivers/phy/starfive/Makefile +++ b/drivers/phy/starfive/Makefile @@ -1,2 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_STARFIVE_DPHY_RX) += phy-starfive-dphy-rx.o +obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o +obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) += phy-jh7110-pcie.o diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c new file mode 100644 index 000000000000..30a8fa1f580d --- /dev/null +++ b/drivers/phy/starfive/phy-jh7110-pcie.c @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * StarFive JH7110 PCIe 2.0 PHY driver + * + * Copyright (C) 2023 Minda Chen + */ + +#include +#include +#include +#include +#include +#include +#include + +#define PCIE_KVCO_LEVEL_OFF (0x28) +#define PCIE_USB3_PHY_PLL_CTL_OFF (0x7c) +#define PCIE_KVCO_TUNE_SIGNAL_OFF (0x80) +#define PCIE_USB3_PHY_ENABLE BIT(4) +#define PHY_KVCO_FINE_TUNE_LEVEL 0x91 +#define PHY_KVCO_FINE_TUNE_SIGNALS 0xc + +struct jh7110_pcie_phy { + struct phy *phy; + void __iomem *regs; + enum phy_mode mode; +}; + +static void jh7110_usb3_mode_set(struct jh7110_pcie_phy *phy) +{ + /* Configuare spread-spectrum mode: down-spread-spectrum */ + writel(PCIE_USB3_PHY_ENABLE, phy->regs + PCIE_USB3_PHY_PLL_CTL_OFF); +} + +static void jh7110_pcie_mode_set(struct jh7110_pcie_phy *phy) +{ + /* PCIe Multi-PHY PLL KVCO Gain fine tune settings: */ + writel(PHY_KVCO_FINE_TUNE_LEVEL, phy->regs + PCIE_KVCO_LEVEL_OFF); + writel(PHY_KVCO_FINE_TUNE_SIGNALS, phy->regs + PCIE_KVCO_TUNE_SIGNAL_OFF); +} + +static int jh7110_pcie_phy_set_mode(struct phy *_phy, + enum phy_mode mode, int submode) +{ + struct jh7110_pcie_phy *phy = phy_get_drvdata(_phy); + + if (mode != phy->mode) { + switch (mode) { + case PHY_MODE_USB_HOST: + case PHY_MODE_USB_DEVICE: + case PHY_MODE_USB_OTG: + jh7110_usb3_mode_set(phy); + break; + case PHY_MODE_PCIE: + jh7110_pcie_mode_set(phy); + break; + default: + return -EINVAL; + } + + dev_info(&_phy->dev, "Changing phy mode to %d\n", mode); + phy->mode = mode; + } + + return 0; +} + +static int jh7110_pcie_phy_init(struct phy *_phy) +{ + return 0; +} + +static int jh7110_pcie_phy_exit(struct phy *_phy) +{ + return 0; +} + +static const struct phy_ops jh7110_pcie_phy_ops = { + .init = jh7110_pcie_phy_init, + .exit = jh7110_pcie_phy_exit, + .set_mode = jh7110_pcie_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int jh7110_pcie_phy_probe(struct platform_device *pdev) +{ + struct jh7110_pcie_phy *phy; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->regs)) + return PTR_ERR(phy->regs); + + phy->phy = devm_phy_create(dev, NULL, &jh7110_pcie_phy_ops); + if (IS_ERR(phy->phy)) + return dev_err_probe(dev, PTR_ERR(phy->regs), + "Failed to map phy base\n"); + + platform_set_drvdata(pdev, phy); + phy_set_drvdata(phy->phy, phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static int jh7110_pcie_phy_remove(struct platform_device *pdev) +{ + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id jh7110_pcie_phy_of_match[] = { + { .compatible = "starfive,jh7110-pcie-phy" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, jh7110_pcie_phy_of_match); + +static struct platform_driver jh7110_pcie_phy_driver = { + .probe = jh7110_pcie_phy_probe, + .remove = jh7110_pcie_phy_remove, + .driver = { + .of_match_table = jh7110_pcie_phy_of_match, + .name = "jh7110-pcie-phy", + } +}; +module_platform_driver(jh7110_pcie_phy_driver); + +MODULE_DESCRIPTION("StarFive JH7110 PCIe 2.0 PHY driver"); +MODULE_AUTHOR("Minda Chen "); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c new file mode 100644 index 000000000000..89db0b7b1224 --- /dev/null +++ b/drivers/phy/starfive/phy-jh7110-usb.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * StarFive JH7110 USB 2.0 PHY driver + * + * Copyright (C) 2023 Minda Chen + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB_125M_CLK_RATE 125000000 +#define USB_LS_KEEPALIVE_OFF 0x4 +#define USB_LS_KEEPALIVE_ENABLE BIT(4) + +struct jh7110_usb2_phy { + struct phy *phy; + void __iomem *regs; + struct clk *usb_125m_clk; + struct clk *app_125; + enum usb_dr_mode dr_mode; +}; + +static void jh7110_usb2_mode_set(struct jh7110_usb2_phy *phy) +{ + unsigned int val; + + if (phy->dr_mode != USB_DR_MODE_PERIPHERAL) { + /* Enable the LS speed keep-alive signal */ + val = readl(phy->regs + USB_LS_KEEPALIVE_OFF); + val |= USB_LS_KEEPALIVE_ENABLE; + writel(val, phy->regs + USB_LS_KEEPALIVE_OFF); + } +} + +static int jh7110_usb2_phy_set_mode(struct phy *_phy, + enum phy_mode mode, int submode) +{ + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); + int new_mode; + + switch (mode) { + case PHY_MODE_USB_HOST: + new_mode = USB_DR_MODE_HOST; + break; + case PHY_MODE_USB_DEVICE: + new_mode = USB_DR_MODE_PERIPHERAL; + break; + case PHY_MODE_USB_OTG: + new_mode = USB_DR_MODE_OTG; + break; + default: + return -EINVAL; + } + + if (new_mode != phy->dr_mode) { + dev_info(&_phy->dev, "Changing dr_mode to %d\n", new_mode); + phy->dr_mode = new_mode; + jh7110_usb2_mode_set(phy); + } + + return 0; +} + +static int jh7110_usb2_phy_init(struct phy *_phy) +{ + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); + int ret; + + ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE); + if (ret) + return ret; + + ret = clk_prepare_enable(phy->app_125); + if (ret) + return ret; + + return 0; +} + +static int jh7110_usb2_phy_exit(struct phy *_phy) +{ + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); + + clk_disable_unprepare(phy->app_125); + + return 0; +} + +static const struct phy_ops jh7110_usb2_phy_ops = { + .init = jh7110_usb2_phy_init, + .exit = jh7110_usb2_phy_exit, + .set_mode = jh7110_usb2_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int jh7110_usb_phy_probe(struct platform_device *pdev) +{ + struct jh7110_usb2_phy *phy; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->usb_125m_clk = devm_clk_get(dev, "125m"); + if (IS_ERR(phy->usb_125m_clk)) + return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk), + "Failed to get 125m clock\n"); + + phy->app_125 = devm_clk_get(dev, "app_125"); + if (IS_ERR(phy->app_125)) + return dev_err_probe(dev, PTR_ERR(phy->app_125), + "Failed to get app 125m clock\n"); + + phy->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->regs)) + return dev_err_probe(dev, PTR_ERR(phy->regs), + "Failed to map phy base\n"); + + phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops); + if (IS_ERR(phy->phy)) + return dev_err_probe(dev, PTR_ERR(phy->phy), + "Failed to create phy\n"); + + platform_set_drvdata(pdev, phy); + phy_set_drvdata(phy->phy, phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static int jh7110_usb_phy_remove(struct platform_device *pdev) +{ + struct jh7110_usb2_phy *phy = platform_get_drvdata(pdev); + + clk_disable_unprepare(phy->app_125); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id jh7110_usb_phy_of_match[] = { + { .compatible = "starfive,jh7110-usb-phy" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match); + +static struct platform_driver jh7110_usb_phy_driver = { + .probe = jh7110_usb_phy_probe, + .remove = jh7110_usb_phy_remove, + .driver = { + .of_match_table = jh7110_usb_phy_of_match, + .name = "jh7110-usb-phy", + } +}; +module_platform_driver(jh7110_usb_phy_driver); + +MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver"); +MODULE_AUTHOR("Minda Chen "); +MODULE_LICENSE("GPL");