@@ -2032,7 +2032,7 @@ usb3_dwc3: usb@a800000 {
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&qusb2phy>, <&usb1_ssphy>;
+ phys = <&qusb2phy>, <&usb3phy>;
phy-names = "usb2-phy", "usb3-phy";
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2041,33 +2041,24 @@ usb3_dwc3: usb@a800000 {
usb3phy: phy@c010000 {
compatible = "qcom,msm8998-qmp-usb3-phy";
- reg = <0x0c010000 0x18c>;
+ reg = <0x0c010000 0x1000>;
status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&gcc GCC_USB3_CLKREF_CLK>,
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "pipe";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB3_PHY_BCR>,
<&gcc GCC_USB3PHY_PHY_BCR>;
reset-names = "phy", "common";
-
- usb1_ssphy: phy@c010200 {
- reg = <0xc010200 0x128>,
- <0xc010400 0x200>,
- <0xc010c00 0x20c>,
- <0xc010600 0x128>,
- <0xc010800 0x200>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_phy_pipe_clk_src";
- };
};
qusb2phy: phy@c012000 {
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 31 ++++++++++----------------- 1 file changed, 11 insertions(+), 20 deletions(-)