@@ -918,7 +918,7 @@ pcie0: pci@1c00000 {
#address-cells = <3>;
#size-cells = <2>;
num-lanes = <1>;
- phys = <&pciephy>;
+ phys = <&pcie_phy>;
phy-names = "pciephy";
status = "disabled";
@@ -948,32 +948,28 @@ pcie0: pci@1c00000 {
pcie_phy: phy@1c06000 {
compatible = "qcom,msm8998-qmp-pcie-phy";
- reg = <0x01c06000 0x18c>;
- #address-cells = <1>;
- #size-cells = <1>;
+ reg = <0x01c06000 0x1000>;
status = "disabled";
- ranges;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&gcc GCC_PCIE_CLKREF_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk_src";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
reset-names = "phy", "common";
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
-
- pciephy: phy@1c06800 {
- reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "pcie_0_pipe_clk_src";
- #clock-cells = <0>;
- };
};
ufshc: ufshc@1da4000 {
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 30 ++++++++++++--------------- 1 file changed, 13 insertions(+), 17 deletions(-)