diff mbox series

[41/41] ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings

Message ID 20230324022514.1800382-42-dmitry.baryshkov@linaro.org
State Changes Requested
Headers show
Series phy: qcom-qmp: convert to newer style of bindings | expand

Commit Message

Dmitry Baryshkov March 24, 2023, 2:25 a.m. UTC 
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom-sdx55.dtsi | 31 ++++++++++++-------------------
 1 file changed, 12 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index d69e3e8b280e..30a58521a3d3 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -375,7 +375,7 @@  pcie_rc: pcie@1c00000 {
 
 			power-domains = <&gcc PCIE_GDSC>;
 
-			phys = <&pcie_lane>;
+			phys = <&pcie_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
@@ -422,7 +422,7 @@  pcie_ep: pcie-ep@1c00000 {
 			resets = <&gcc GCC_PCIE_BCR>;
 			reset-names = "core";
 			power-domains = <&gcc PCIE_GDSC>;
-			phys = <&pcie_lane>;
+			phys = <&pcie_phy>;
 			phy-names = "pciephy";
 			max-link-speed = <3>;
 			num-lanes = <2>;
@@ -432,18 +432,25 @@  pcie_ep: pcie-ep@1c00000 {
 
 		pcie_phy: phy@1c07000 {
 			compatible = "qcom,sdx55-qmp-pcie-phy";
-			reg = <0x01c07000 0x1c4>;
+			reg = <0x01c07000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
 				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>,
+				 <&gcc GCC_PCIE_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
 				      "ref",
-				      "refgen";
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_PHY_BCR>;
 			reset-names = "phy";
@@ -452,20 +459,6 @@  pcie_phy: phy@1c07000 {
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie_lane: lanes@1c06000 {
-				reg = <0x01c06000 0x104>, /* tx0 */
-				      <0x01c06200 0x328>, /* rx0 */
-				      <0x01c07200 0x1e8>, /* pcs */
-				      <0x01c06800 0x104>, /* tx1 */
-				      <0x01c06a00 0x328>, /* rx1 */
-				      <0x01c07600 0x800>; /* pcs_misc */
-				clocks = <&gcc GCC_PCIE_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#phy-cells = <0>;
-				clock-output-names = "pcie_pipe_clk";
-			};
 		};
 
 		ipa: ipa@1e40000 {