diff mbox series

[v13,12/15] arm64: dts: ls1088a: Prevent PCSs from probing as phys

Message ID 20230411184313.3679145-13-sean.anderson@seco.com
State Superseded
Headers show
Series phy: Add support for Lynx 10G SerDes | expand

Commit Message

Sean Anderson April 11, 2023, 6:43 p.m. UTC 
The internal PCSs are not always accessible during boot (such as if the
serdes has deselected the appropriate link mode). Give them appropriate
compatible strings so they don't automatically (fail to) probe as
genphys.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>

---

(no changes since v8)

Changes in v8:
- New

 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 30 ++++++++++++-------
 1 file changed, 20 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 59b401daad4d..bbc714f84577 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -932,7 +932,8 @@  pcs_mdio1: mdio@8c07000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs1: ethernet-phy@0 {
+			pcs1: ethernet-pcs@0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 		};
@@ -945,7 +946,8 @@  pcs_mdio2: mdio@8c0b000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs2: ethernet-phy@0 {
+			pcs2: ethernet-pcs@0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 		};
@@ -958,19 +960,23 @@  pcs_mdio3: mdio@8c0f000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs3_0: ethernet-phy@0 {
+			pcs3_0: ethernet-pcs@0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 
-			pcs3_1: ethernet-phy@1 {
+			pcs3_1: ethernet-pcs@1 {
+				compatible = "fsl,lynx-pcs";
 				reg = <1>;
 			};
 
-			pcs3_2: ethernet-phy@2 {
+			pcs3_2: ethernet-pcs@2 {
+				compatible = "fsl,lynx-pcs";
 				reg = <2>;
 			};
 
-			pcs3_3: ethernet-phy@3 {
+			pcs3_3: ethernet-pcs@3 {
+				compatible = "fsl,lynx-pcs";
 				reg = <3>;
 			};
 		};
@@ -983,19 +989,23 @@  pcs_mdio7: mdio@8c1f000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs7_0: ethernet-phy@0 {
+			pcs7_0: ethernet-pcs@0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 
-			pcs7_1: ethernet-phy@1 {
+			pcs7_1: ethernet-pcs@1 {
+				compatible = "fsl,lynx-pcs";
 				reg = <1>;
 			};
 
-			pcs7_2: ethernet-phy@2 {
+			pcs7_2: ethernet-pcs@2 {
+				compatible = "fsl,lynx-pcs";
 				reg = <2>;
 			};
 
-			pcs7_3: ethernet-phy@3 {
+			pcs7_3: ethernet-pcs@3 {
+				compatible = "fsl,lynx-pcs";
 				reg = <3>;
 			};
 		};