@@ -6,6 +6,7 @@
* Copyright (c) 2019-2020 NXP
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -91,9 +92,19 @@
/* USB2 PHY register definition */
#define UTMI_REG15 0xaf
+#define UTMI_AFE_RX_REG0 0x0d
#define UTMI_AFE_RX_REG5 0x12
#define UTMI_AFE_BC_REG4 0x29
+/* Align UTMI_AFE_RX_REG0 bit[7:6] define */
+enum usb2_disconn_threshold {
+ USB2_DISCONN_THRESHOLD_575 = 0x0,
+ USB2_DISCONN_THRESHOLD_610 = 0x1,
+ USB2_DISCONN_THRESHOLD_645 = 0x3,
+};
+
+#define RX_USB2_DISCONN_MASK GENMASK(7, 6)
+
/* TB_ADDR_TX_RCVDETSC_CTRL */
#define RXDET_IN_P3_32KHZ BIT(0)
/*
@@ -125,6 +136,7 @@ struct cdns_salvo_phy {
struct clk *clk;
void __iomem *base;
struct cdns_salvo_data *data;
+ enum usb2_disconn_threshold usb2_disconn;
};
static const struct of_device_id cdns_salvo_phy_of_match[];
@@ -260,6 +272,12 @@ static int cdns_salvo_phy_init(struct phy *phy)
value | TXVALID_GATE_THRESHOLD_HS_0US);
cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG5, 0x5);
+
+ value = cdns_salvo_read(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG0);
+ value &= ~RX_USB2_DISCONN_MASK;
+ value = FIELD_PREP(RX_USB2_DISCONN_MASK, salvo_phy->usb2_disconn);
+ cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG0, value);
+
udelay(10);
clk_disable_unprepare(salvo_phy->clk);
@@ -314,6 +332,7 @@ static int cdns_salvo_phy_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct cdns_salvo_phy *salvo_phy;
struct cdns_salvo_data *data;
+ u32 val;
data = (struct cdns_salvo_data *)of_device_get_match_data(dev);
salvo_phy = devm_kzalloc(dev, sizeof(*salvo_phy), GFP_KERNEL);
@@ -325,6 +344,16 @@ static int cdns_salvo_phy_probe(struct platform_device *pdev)
if (IS_ERR(salvo_phy->clk))
return PTR_ERR(salvo_phy->clk);
+ if (of_property_read_u32(dev->of_node, "cdns,usb2-disconnect-threshold-microvolt", &val))
+ val = 575;
+
+ if (val < 610)
+ salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_575;
+ else if (val < 645)
+ salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_610;
+ else
+ salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_645;
+
salvo_phy->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(salvo_phy->base))
return PTR_ERR(salvo_phy->base);
Add cdns,usb2-disconnect-threshold-microvolt property to address fake USB disconnection issue during enumeration or suspend state for difference platform. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- drivers/phy/cadence/phy-cadence-salvo.c | 29 +++++++++++++++++++++++++ 1 file changed, 29 insertions(+)