diff mbox series

[v3,08/10] arm64: dts: qcom: sdm845: switch USB+DP QMP PHY to new style of bindings

Message ID 20230521202321.19778-9-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series phy: qcom-qmp-combo: convert to newer style of bindings | expand

Commit Message

Dmitry Baryshkov May 21, 2023, 8:23 p.m. UTC 
Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 57 ++++++++++------------------
 1 file changed, 19 insertions(+), 38 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 90424442bb4a..6aa2f8f3affc 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -18,6 +18,7 @@ 
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -3969,49 +3970,28 @@  usb_2_hsphy: phy@88e3000 {
 			nvmem-cells = <&qusb2s_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x38>,
-			      <0 0x088ea000 0 0x40>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x128>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
@@ -4091,7 +4071,7 @@  usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x740 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4559,8 +4539,9 @@  mdss_dp: displayport-controller@ae90000 {
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -4898,8 +4879,8 @@  dispcc: clock-controller@af00000 {
 				 <&dsi0_phy 1>,
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "gcc_disp_gpll0_div_clk_src",