diff mbox series

[4/4] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY

Message ID 20240116-sdm660-usb3-support-v1-4-2fbd683aea77@linaro.org
State Handled Elsewhere
Headers show
Series phy: qcom: qmp-usbc: enable SDM660 support | expand

Commit Message

Dmitry Baryshkov Jan. 16, 2024, 1:10 a.m. UTC 
The Inforce IFC6560 board actually has USB SS lines routed to the USB-C
connector. Enable USB 3.0 PHY and SS mode for the USB3 host.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 90118f133961..702ab49bbc59 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -454,16 +454,15 @@  &usb2_dwc3 {
 };
 
 &usb3 {
-	qcom,select-utmi-as-pipe-clk;
-	
 	status = "okay";
 };
 
 &usb3_dwc3 {
-	maximum-speed = "high-speed";
-	phys = <&qusb2phy0>;
-	phy-names = "usb2-phy";
-	
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
+
+&usb3_qmpphy {
+	vdda-phy-supply = <&vreg_l1b_0p925>;
+	status = "okay";
+};