From patchwork Tue Feb 13 16:32:38 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sebastian Reichel X-Patchwork-Id: 13555375 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 25FFEC48BC4 for ; Tue, 13 Feb 2024 16:36:44 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=hTTDc2IJWm0qMua5+YNaUDnTD5d6zuDoC6YftFCOedw=; b=JeklOLzKzOyDyT SgsU5+XEd+GHGBTKpn+UUtKDuPXHrpK9szOxx5KiXPMXnuJPJOLdY78ZmHvdzRbh32LJrYn6mkWNq 9oBA1dMTV6s+oVl5GOxOJvCh7VB/bRmk6gO+tQVS+EyX8ERDDYmyDcNC6s5n8tcl4JRbs7bZF/KVq pQG+9lzOCFyKHoUoJkmeXy3w8IaeXFPK4TgB8FPfaPvUZrH6r9idaIg1ntDoH5A5kBImjEb9nYUsT 2GF4iHLlLfAUHynGb0UAq5AbSUhZ9LcK0GYLRPxHBzXAC9CQr4lmUy/GDiYs2ZFkycX45iDsFOCow YNREhbU20IoY/YukDBkg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.97.1 #2 (Red Hat Linux)) id 1rZvlz-00000009ydo-1xa9; Tue, 13 Feb 2024 16:36:43 +0000 Received: from madrid.collaboradmins.com ([46.235.227.194]) by bombadil.infradead.org with esmtps (Exim 4.97.1 #2 (Red Hat Linux)) id 1rZvlZ-00000009yDk-3QfS; Tue, 13 Feb 2024 16:36:25 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com; s=mail; t=1707842171; bh=NWoiVamRu8hP6ZwA+BxEGNXHscBD/XXkocyX0DPLmNs=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=oP92Vs21Uz9YjdQDO/prS+sAy1vR8qXSqtlCCb6gCSvDU5nyJP8ARw2Ma/mvi4SP0 gE36gseWgnHb1lZc0UDXIlJNh7u6Svn4sW6lScJHgjUh1pL9lxuiEjlp8RWCs4wOg5 j5nFRc37xv7Jikz7S0fxeQG/rOuhj7GBPN6OP6B8pnts0HzZ0/lnixfFJgR9l1NAuH LTauz6APoxY3CV/P16oBOVy0ni+u8CaSvXyQ6GLRlNrrIig3bicccYLWcDqo27Djca ZCD59GlIbAtrtPhoJoQpkjEV7bYfBn5ybxaXhcBsMxlotgbjCY5oVuALT8LKytVN0Z RU1MM+Y36CYLg== Received: from jupiter.universe (cola.collaboradmins.com [195.201.22.229]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) (Authenticated sender: sre) by madrid.collaboradmins.com (Postfix) with ESMTPSA id 6F39D3782075; Tue, 13 Feb 2024 16:36:11 +0000 (UTC) Received: by jupiter.universe (Postfix, from userid 1000) id 01A824800D2; Tue, 13 Feb 2024 17:36:11 +0100 (CET) From: Sebastian Reichel To: Heiko Stuebner , Vinod Koul , Kishon Vijay Abraham I , linux-rockchip@lists.infradead.org, linux-phy@lists.infradead.org Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Frank Wang , Kever Yang , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sebastian Reichel , kernel@collabora.com, Zhang Yubing Subject: [PATCH v2 04/12] phy: rockchip: add usbdp combo phy driver Date: Tue, 13 Feb 2024 17:32:38 +0100 Message-ID: <20240213163609.44930-5-sebastian.reichel@collabora.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240213163609.44930-1-sebastian.reichel@collabora.com> References: <20240213163609.44930-1-sebastian.reichel@collabora.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240213_083618_389141_32AE7A6B X-CRM114-Status: GOOD ( 23.92 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org This adds a new USBDP combo PHY with Samsung IP block driver. The driver get lane mux and mapping info in 2 ways, supporting DisplayPort alternate mode or parsing from DT. When parsing from DT, the property "rockchip,dp-lane-mux" provide the DP mux and mapping info. This is needed when the PHY is not used with TypeC Alt-Mode. For example if the USB3 interface of the PHY is connected to a USB Type A connector and the DP interface is connected to a DisplayPort connector. When do DP link training, need to set lane number, link rate, swing, and pre-emphasis via PHY configure interface. Co-developed-by: Heiko Stuebner Signed-off-by: Heiko Stuebner Co-developed-by: Zhang Yubing Signed-off-by: Zhang Yubing Co-developed-by: Frank Wang Signed-off-by: Frank Wang Signed-off-by: Sebastian Reichel --- drivers/phy/rockchip/Kconfig | 12 + drivers/phy/rockchip/Makefile | 1 + drivers/phy/rockchip/phy-rockchip-usbdp.c | 1639 +++++++++++++++++++++ 3 files changed, 1652 insertions(+) create mode 100644 drivers/phy/rockchip/phy-rockchip-usbdp.c diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index 94360fc96a6f..d21b458c1d18 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -107,3 +107,15 @@ config PHY_ROCKCHIP_USB select GENERIC_PHY help Enable this to support the Rockchip USB 2.0 PHY. + +config PHY_ROCKCHIP_USBDP + tristate "Rockchip USBDP COMBO PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + select TYPEC + help + Enable this to support the Rockchip USB3.0/DP combo PHY with + Samsung IP block. This is required for USB3 support on RK3588. + + To compile this driver as a module, choose M here: the module + will be called phy-rockchip-usbdp diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile index 7eab129230d1..25d2e1355db7 100644 --- a/drivers/phy/rockchip/Makefile +++ b/drivers/phy/rockchip/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3) += phy-rockchip-snps-pcie3.o obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o +obj-$(CONFIG_PHY_ROCKCHIP_USBDP) += phy-rockchip-usbdp.o diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c new file mode 100644 index 000000000000..8b1ace2aaa98 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c @@ -0,0 +1,1639 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Rockchip USBDP Combo PHY with Samsung IP block driver + * + * Copyright (C) 2021 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* USBDP PHY Register Definitions */ +#define UDPHY_PCS 0x4000 +#define UDPHY_PMA 0x8000 + +/* VO0 GRF Registers */ +#define DP_SINK_HPD_CFG BIT(11) +#define DP_SINK_HPD_SEL BIT(10) +#define DP_AUX_DIN_SEL BIT(9) +#define DP_AUX_DOUT_SEL BIT(8) +#define DP_LANE_SEL_N(n) GENMASK(2 * (n) + 1, 2 * (n)) +#define DP_LANE_SEL_ALL GENMASK(7, 0) + +/* PMA CMN Registers */ +#define CMN_LANE_MUX_AND_EN_OFFSET 0x0288 /* cmn_reg00A2 */ +#define CMN_DP_LANE_MUX_N(n) BIT((n) + 4) +#define CMN_DP_LANE_EN_N(n) BIT(n) +#define CMN_DP_LANE_MUX_ALL GENMASK(7, 4) +#define CMN_DP_LANE_EN_ALL GENMASK(3, 0) + +#define CMN_DP_LINK_OFFSET 0x28c /* cmn_reg00A3 */ +#define CMN_DP_TX_LINK_BW GENMASK(6, 5) +#define CMN_DP_TX_LANE_SWAP_EN BIT(2) + +#define CMN_SSC_EN_OFFSET 0x2d0 /* cmn_reg00B4 */ +#define CMN_ROPLL_SSC_EN BIT(1) +#define CMN_LCPLL_SSC_EN BIT(0) + +#define CMN_ANA_LCPLL_DONE_OFFSET 0x0350 /* cmn_reg00D4 */ +#define CMN_ANA_LCPLL_LOCK_DONE BIT(7) +#define CMN_ANA_LCPLL_AFC_DONE BIT(6) + +#define CMN_ANA_ROPLL_DONE_OFFSET 0x0354 /* cmn_reg00D5 */ +#define CMN_ANA_ROPLL_LOCK_DONE BIT(1) +#define CMN_ANA_ROPLL_AFC_DONE BIT(0) + +#define CMN_DP_RSTN_OFFSET 0x038c /* cmn_reg00E3 */ +#define CMN_DP_INIT_RSTN BIT(3) +#define CMN_DP_CMN_RSTN BIT(2) +#define CMN_CDR_WTCHDG_EN BIT(1) +#define CMN_CDR_WTCHDG_MSK_CDR_EN BIT(0) + +#define TRSV_ANA_TX_CLK_OFFSET_N(n) (0x854 + (n) * 0x800) /* trsv_reg0215 */ +#define LN_ANA_TX_SER_TXCLK_INV BIT(1) + +#define TRSV_LN0_MON_RX_CDR_DONE_OFFSET 0x0b84 /* trsv_reg02E1 */ +#define TRSV_LN0_MON_RX_CDR_LOCK_DONE BIT(0) + +#define TRSV_LN2_MON_RX_CDR_DONE_OFFSET 0x1b84 /* trsv_reg06E1 */ +#define TRSV_LN2_MON_RX_CDR_LOCK_DONE BIT(0) + +#define BIT_WRITEABLE_SHIFT 16 +#define PHY_AUX_DP_DATA_POL_NORMAL 0 +#define PHY_AUX_DP_DATA_POL_INVERT 1 +#define PHY_LANE_MUX_USB 0 +#define PHY_LANE_MUX_DP 1 + +enum { + DP_BW_RBR, + DP_BW_HBR, + DP_BW_HBR2, + DP_BW_HBR3, +}; + +enum { + UDPHY_MODE_NONE = 0, + UDPHY_MODE_USB = BIT(0), + UDPHY_MODE_DP = BIT(1), + UDPHY_MODE_DP_USB = BIT(1) | BIT(0), +}; + +struct rk_udphy_grf_reg { + unsigned int offset; + unsigned int bitend; + unsigned int bitstart; + unsigned int disable; + unsigned int enable; +}; + +struct rk_udphy_grf_cfg { + /* u2phy-grf */ + struct rk_udphy_grf_reg bvalid_phy_con; + struct rk_udphy_grf_reg bvalid_grf_con; + + /* usb-grf */ + struct rk_udphy_grf_reg usb3otg0_cfg; + struct rk_udphy_grf_reg usb3otg1_cfg; + + /* usbdpphy-grf */ + struct rk_udphy_grf_reg low_pwrn; + struct rk_udphy_grf_reg rx_lfps; +}; + +struct rk_udphy_vogrf_cfg { + /* vo-grf */ + struct rk_udphy_grf_reg hpd_trigger; + u32 dp_lane_reg; +}; + +struct rk_udphy_dp_tx_drv_ctrl { + u32 trsv_reg0204; + u32 trsv_reg0205; + u32 trsv_reg0206; + u32 trsv_reg0207; +}; + +struct rk_udphy_cfg { + unsigned int num_phys; + unsigned int phy_ids[2]; + /* resets to be requested */ + const char * const *rst_list; + int num_rsts; + + struct rk_udphy_grf_cfg grfcfg; + struct rk_udphy_vogrf_cfg vogrfcfg[2]; + const struct rk_udphy_dp_tx_drv_ctrl (*dp_tx_ctrl_cfg[4])[4]; + const struct rk_udphy_dp_tx_drv_ctrl (*dp_tx_ctrl_cfg_typec[4])[4]; +}; + +struct rk_udphy { + struct device *dev; + struct regmap *pma_regmap; + struct regmap *u2phygrf; + struct regmap *udphygrf; + struct regmap *usbgrf; + struct regmap *vogrf; + struct typec_switch_dev *sw; + struct typec_mux_dev *mux; + struct mutex mutex; /* mutex to protect access to individual PHYs */ + + /* clocks and rests */ + int num_clks; + struct clk_bulk_data *clks; + struct clk *refclk; + int num_rsts; + struct reset_control_bulk_data *rsts; + + /* PHY status management */ + bool flip; + bool mode_change; + u8 mode; + u8 status; + + /* utilized for USB */ + bool hs; /* flag for high-speed */ + + /* utilized for DP */ + struct gpio_desc *sbu1_dc_gpio; + struct gpio_desc *sbu2_dc_gpio; + u32 lane_mux_sel[4]; + u32 dp_lane_sel[4]; + u32 dp_aux_dout_sel; + u32 dp_aux_din_sel; + bool dp_sink_hpd_sel; + bool dp_sink_hpd_cfg; + u8 bw; + int id; + + bool dp_in_use; + + /* PHY const config */ + const struct rk_udphy_cfg *cfgs; +}; + +static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_rbr_hbr[4][4] = { + /* voltage swing 0, pre-emphasis 0->3 */ + { + { 0x20, 0x10, 0x42, 0xe5 }, + { 0x26, 0x14, 0x42, 0xe5 }, + { 0x29, 0x18, 0x42, 0xe5 }, + { 0x2b, 0x1c, 0x43, 0xe7 }, + }, + + /* voltage swing 1, pre-emphasis 0->2 */ + { + { 0x23, 0x10, 0x42, 0xe7 }, + { 0x2a, 0x17, 0x43, 0xe7 }, + { 0x2b, 0x1a, 0x43, 0xe7 }, + }, + + /* voltage swing 2, pre-emphasis 0->1 */ + { + { 0x27, 0x10, 0x42, 0xe7 }, + { 0x2b, 0x17, 0x43, 0xe7 }, + }, + + /* voltage swing 3, pre-emphasis 0 */ + { + { 0x29, 0x10, 0x43, 0xe7 }, + }, +}; + +static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_rbr_hbr_typec[4][4] = { + /* voltage swing 0, pre-emphasis 0->3 */ + { + { 0x20, 0x10, 0x42, 0xe5 }, + { 0x26, 0x14, 0x42, 0xe5 }, + { 0x29, 0x18, 0x42, 0xe5 }, + { 0x2b, 0x1c, 0x43, 0xe7 }, + }, + + /* voltage swing 1, pre-emphasis 0->2 */ + { + { 0x23, 0x10, 0x42, 0xe7 }, + { 0x2a, 0x17, 0x43, 0xe7 }, + { 0x2b, 0x1a, 0x43, 0xe7 }, + }, + + /* voltage swing 2, pre-emphasis 0->1 */ + { + { 0x27, 0x10, 0x43, 0x67 }, + { 0x2b, 0x17, 0x43, 0xe7 }, + }, + + /* voltage swing 3, pre-emphasis 0 */ + { + { 0x29, 0x10, 0x43, 0xe7 }, + }, +}; + +static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_hbr2[4][4] = { + /* voltage swing 0, pre-emphasis 0->3 */ + { + { 0x21, 0x10, 0x42, 0xe5 }, + { 0x26, 0x14, 0x42, 0xe5 }, + { 0x26, 0x16, 0x43, 0xe5 }, + { 0x2a, 0x19, 0x43, 0xe7 }, + }, + + /* voltage swing 1, pre-emphasis 0->2 */ + { + { 0x24, 0x10, 0x42, 0xe7 }, + { 0x2a, 0x17, 0x43, 0xe7 }, + { 0x2b, 0x1a, 0x43, 0xe7 }, + }, + + /* voltage swing 2, pre-emphasis 0->1 */ + { + { 0x28, 0x10, 0x42, 0xe7 }, + { 0x2b, 0x17, 0x43, 0xe7 }, + }, + + /* voltage swing 3, pre-emphasis 0 */ + { + { 0x28, 0x10, 0x43, 0xe7 }, + }, +}; + +static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_hbr3[4][4] = { + /* voltage swing 0, pre-emphasis 0->3 */ + { + { 0x21, 0x10, 0x42, 0xe5 }, + { 0x26, 0x14, 0x42, 0xe5 }, + { 0x26, 0x16, 0x43, 0xe5 }, + { 0x29, 0x18, 0x43, 0xe7 }, + }, + + /* voltage swing 1, pre-emphasis 0->2 */ + { + { 0x24, 0x10, 0x42, 0xe7 }, + { 0x2a, 0x18, 0x43, 0xe7 }, + { 0x2b, 0x1b, 0x43, 0xe7 } + }, + + /* voltage swing 2, pre-emphasis 0->1 */ + { + { 0x27, 0x10, 0x42, 0xe7 }, + { 0x2b, 0x18, 0x43, 0xe7 } + }, + + /* voltage swing 3, pre-emphasis 0 */ + { + { 0x28, 0x10, 0x43, 0xe7 }, + }, +}; + +static const struct reg_sequence rk_udphy_24m_refclk_cfg[] = { + {0x0090, 0x68}, {0x0094, 0x68}, + {0x0128, 0x24}, {0x012c, 0x44}, + {0x0130, 0x3f}, {0x0134, 0x44}, + {0x015c, 0xa9}, {0x0160, 0x71}, + {0x0164, 0x71}, {0x0168, 0xa9}, + {0x0174, 0xa9}, {0x0178, 0x71}, + {0x017c, 0x71}, {0x0180, 0xa9}, + {0x018c, 0x41}, {0x0190, 0x00}, + {0x0194, 0x05}, {0x01ac, 0x2a}, + {0x01b0, 0x17}, {0x01b4, 0x17}, + {0x01b8, 0x2a}, {0x01c8, 0x04}, + {0x01cc, 0x08}, {0x01d0, 0x08}, + {0x01d4, 0x04}, {0x01d8, 0x20}, + {0x01dc, 0x01}, {0x01e0, 0x09}, + {0x01e4, 0x03}, {0x01f0, 0x29}, + {0x01f4, 0x02}, {0x01f8, 0x02}, + {0x01fc, 0x29}, {0x0208, 0x2a}, + {0x020c, 0x17}, {0x0210, 0x17}, + {0x0214, 0x2a}, {0x0224, 0x20}, + {0x03f0, 0x0a}, {0x03f4, 0x07}, + {0x03f8, 0x07}, {0x03fc, 0x0c}, + {0x0404, 0x12}, {0x0408, 0x1a}, + {0x040c, 0x1a}, {0x0410, 0x3f}, + {0x0ce0, 0x68}, {0x0ce8, 0xd0}, + {0x0cf0, 0x87}, {0x0cf8, 0x70}, + {0x0d00, 0x70}, {0x0d08, 0xa9}, + {0x1ce0, 0x68}, {0x1ce8, 0xd0}, + {0x1cf0, 0x87}, {0x1cf8, 0x70}, + {0x1d00, 0x70}, {0x1d08, 0xa9}, + {0x0a3c, 0xd0}, {0x0a44, 0xd0}, + {0x0a48, 0x01}, {0x0a4c, 0x0d}, + {0x0a54, 0xe0}, {0x0a5c, 0xe0}, + {0x0a64, 0xa8}, {0x1a3c, 0xd0}, + {0x1a44, 0xd0}, {0x1a48, 0x01}, + {0x1a4c, 0x0d}, {0x1a54, 0xe0}, + {0x1a5c, 0xe0}, {0x1a64, 0xa8} +}; + +static const struct reg_sequence rk_udphy_26m_refclk_cfg[] = { + {0x0830, 0x07}, {0x085c, 0x80}, + {0x1030, 0x07}, {0x105c, 0x80}, + {0x1830, 0x07}, {0x185c, 0x80}, + {0x2030, 0x07}, {0x205c, 0x80}, + {0x0228, 0x38}, {0x0104, 0x44}, + {0x0248, 0x44}, {0x038c, 0x02}, + {0x0878, 0x04}, {0x1878, 0x04}, + {0x0898, 0x77}, {0x1898, 0x77}, + {0x0054, 0x01}, {0x00e0, 0x38}, + {0x0060, 0x24}, {0x0064, 0x77}, + {0x0070, 0x76}, {0x0234, 0xe8}, + {0x0af4, 0x15}, {0x1af4, 0x15}, + {0x081c, 0xe5}, {0x181c, 0xe5}, + {0x099c, 0x48}, {0x199c, 0x48}, + {0x09a4, 0x07}, {0x09a8, 0x22}, + {0x19a4, 0x07}, {0x19a8, 0x22}, + {0x09b8, 0x3e}, {0x19b8, 0x3e}, + {0x09e4, 0x02}, {0x19e4, 0x02}, + {0x0a34, 0x1e}, {0x1a34, 0x1e}, + {0x0a98, 0x2f}, {0x1a98, 0x2f}, + {0x0c30, 0x0e}, {0x0c48, 0x06}, + {0x1c30, 0x0e}, {0x1c48, 0x06}, + {0x028c, 0x18}, {0x0af0, 0x00}, + {0x1af0, 0x00} +}; + +static const struct reg_sequence rk_udphy_init_sequence[] = { + {0x0104, 0x44}, {0x0234, 0xe8}, + {0x0248, 0x44}, {0x028c, 0x18}, + {0x081c, 0xe5}, {0x0878, 0x00}, + {0x0994, 0x1c}, {0x0af0, 0x00}, + {0x181c, 0xe5}, {0x1878, 0x00}, + {0x1994, 0x1c}, {0x1af0, 0x00}, + {0x0428, 0x60}, {0x0d58, 0x33}, + {0x1d58, 0x33}, {0x0990, 0x74}, + {0x0d64, 0x17}, {0x08c8, 0x13}, + {0x1990, 0x74}, {0x1d64, 0x17}, + {0x18c8, 0x13}, {0x0d90, 0x40}, + {0x0da8, 0x40}, {0x0dc0, 0x40}, + {0x0dd8, 0x40}, {0x1d90, 0x40}, + {0x1da8, 0x40}, {0x1dc0, 0x40}, + {0x1dd8, 0x40}, {0x03c0, 0x30}, + {0x03c4, 0x06}, {0x0e10, 0x00}, + {0x1e10, 0x00}, {0x043c, 0x0f}, + {0x0d2c, 0xff}, {0x1d2c, 0xff}, + {0x0d34, 0x0f}, {0x1d34, 0x0f}, + {0x08fc, 0x2a}, {0x0914, 0x28}, + {0x0a30, 0x03}, {0x0e38, 0x03}, + {0x0ecc, 0x27}, {0x0ed0, 0x22}, + {0x0ed4, 0x26}, {0x18fc, 0x2a}, + {0x1914, 0x28}, {0x1a30, 0x03}, + {0x1e38, 0x03}, {0x1ecc, 0x27}, + {0x1ed0, 0x22}, {0x1ed4, 0x26}, + {0x0048, 0x0f}, {0x0060, 0x3c}, + {0x0064, 0xf7}, {0x006c, 0x20}, + {0x0070, 0x7d}, {0x0074, 0x68}, + {0x0af4, 0x1a}, {0x1af4, 0x1a}, + {0x0440, 0x3f}, {0x10d4, 0x08}, + {0x20d4, 0x08}, {0x00d4, 0x30}, + {0x0024, 0x6e}, +}; + +static inline int rk_udphy_grfreg_write(struct regmap *base, + const struct rk_udphy_grf_reg *reg, bool en) +{ + u32 val, mask, tmp; + + tmp = en ? reg->enable : reg->disable; + mask = GENMASK(reg->bitend, reg->bitstart); + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); + + return regmap_write(base, reg->offset, val); +} + +static int rk_udphy_clk_init(struct rk_udphy *udphy, struct device *dev) +{ + int i; + + udphy->num_clks = devm_clk_bulk_get_all(dev, &udphy->clks); + if (udphy->num_clks < 1) + return -ENODEV; + + /* used for configure phy reference clock frequency */ + for (i = 0; i < udphy->num_clks; i++) { + if (!strncmp(udphy->clks[i].id, "refclk", 6)) { + udphy->refclk = udphy->clks[i].clk; + break; + } + } + + if (!udphy->refclk) + return dev_err_probe(udphy->dev, -EINVAL, "no refclk found\n"); + + return 0; +} + +static int rk_udphy_reset_assert_all(struct rk_udphy *udphy) +{ + return reset_control_bulk_assert(udphy->num_rsts, udphy->rsts); +} + +static int rk_udphy_reset_deassert_all(struct rk_udphy *udphy) +{ + return reset_control_bulk_deassert(udphy->num_rsts, udphy->rsts); +} + +static int rk_udphy_reset_deassert(struct rk_udphy *udphy, char *name) +{ + struct reset_control_bulk_data *list = udphy->rsts; + int idx; + + for (idx = 0; idx < udphy->num_rsts; idx++) { + if (!strcmp(list[idx].id, name)) + return reset_control_deassert(list[idx].rstc); + } + + return -EINVAL; +} + +static int rk_udphy_reset_init(struct rk_udphy *udphy, struct device *dev) +{ + const struct rk_udphy_cfg *cfg = udphy->cfgs; + int idx; + + udphy->num_rsts = cfg->num_rsts; + udphy->rsts = devm_kcalloc(dev, udphy->num_rsts, + sizeof(*udphy->rsts), GFP_KERNEL); + if (!udphy->rsts) + return -ENOMEM; + + for (idx = 0; idx < cfg->num_rsts; idx++) + udphy->rsts[idx].id = cfg->rst_list[idx]; + + return devm_reset_control_bulk_get_exclusive(dev, cfg->num_rsts, + udphy->rsts); +} + +static void rk_udphy_u3_port_disable(struct rk_udphy *udphy, u8 disable) +{ + const struct rk_udphy_cfg *cfg = udphy->cfgs; + const struct rk_udphy_grf_reg *preg; + + preg = udphy->id ? &cfg->grfcfg.usb3otg1_cfg : &cfg->grfcfg.usb3otg0_cfg; + rk_udphy_grfreg_write(udphy->usbgrf, preg, disable); +} + +static void rk_udphy_usb_bvalid_enable(struct rk_udphy *udphy, u8 enable) +{ + const struct rk_udphy_cfg *cfg = udphy->cfgs; + + rk_udphy_grfreg_write(udphy->u2phygrf, &cfg->grfcfg.bvalid_phy_con, enable); + rk_udphy_grfreg_write(udphy->u2phygrf, &cfg->grfcfg.bvalid_grf_con, enable); +} + +/* + * In usb/dp combo phy driver, here are 2 ways to mapping lanes. + * + * 1 Type-C Mapping table (DP_Alt_Mode V1.0b remove ABF pin mapping) + * --------------------------------------------------------------------------- + * Type-C Pin B11-B10 A2-A3 A11-A10 B2-B3 + * PHY Pad ln0(tx/rx) ln1(tx) ln2(tx/rx) ln3(tx) + * C/E(Normal) dpln3 dpln2 dpln0 dpln1 + * C/E(Flip ) dpln0 dpln1 dpln3 dpln2 + * D/F(Normal) usbrx usbtx dpln0 dpln1 + * D/F(Flip ) dpln0 dpln1 usbrx usbtx + * A(Normal ) dpln3 dpln1 dpln2 dpln0 + * A(Flip ) dpln2 dpln0 dpln3 dpln1 + * B(Normal ) usbrx usbtx dpln1 dpln0 + * B(Flip ) dpln1 dpln0 usbrx usbtx + * --------------------------------------------------------------------------- + * + * 2 Mapping the lanes in dtsi + * if all 4 lane assignment for dp function, define rockchip,dp-lane-mux = ; + * sample as follow: + * --------------------------------------------------------------------------- + * B11-B10 A2-A3 A11-A10 B2-B3 + * rockchip,dp-lane-mux ln0(tx/rx) ln1(tx) ln2(tx/rx) ln3(tx) + * <0 1 2 3> dpln0 dpln1 dpln2 dpln3 + * <2 3 0 1> dpln2 dpln3 dpln0 dpln1 + * --------------------------------------------------------------------------- + * if 2 lane for dp function, 2 lane for usb function, define rockchip,dp-lane-mux = ; + * sample as follow: + * --------------------------------------------------------------------------- + * B11-B10 A2-A3 A11-A10 B2-B3 + * rockchip,dp-lane-mux ln0(tx/rx) ln1(tx) ln2(tx/rx) ln3(tx) + * <0 1> dpln0 dpln1 usbrx usbtx + * <2 3> usbrx usbtx dpln0 dpln1 + * --------------------------------------------------------------------------- + */ + +static int rk_udphy_dplane_select(struct rk_udphy *udphy) +{ + const struct rk_udphy_cfg *cfg = udphy->cfgs; + u32 value = 0; + + switch (udphy->mode) { + case UDPHY_MODE_DP: + value |= 2 << udphy->dp_lane_sel[2] * 2; + value |= 3 << udphy->dp_lane_sel[3] * 2; + fallthrough; + case UDPHY_MODE_DP_USB: + value |= 0 << udphy->dp_lane_sel[0] * 2; + value |= 1 << udphy->dp_lane_sel[1] * 2; + break; + case UDPHY_MODE_USB: + break; + default: + break; + } + + regmap_write(udphy->vogrf, cfg->vogrfcfg[udphy->id].dp_lane_reg, + ((DP_AUX_DIN_SEL | DP_AUX_DOUT_SEL | DP_LANE_SEL_ALL) << 16) | + FIELD_PREP(DP_AUX_DIN_SEL, udphy->dp_aux_din_sel) | + FIELD_PREP(DP_AUX_DOUT_SEL, udphy->dp_aux_dout_sel) | value); + + return 0; +} + +static int rk_udphy_dplane_get(struct rk_udphy *udphy) +{ + int dp_lanes; + + switch (udphy->mode) { + case UDPHY_MODE_DP: + dp_lanes = 4; + break; + case UDPHY_MODE_DP_USB: + dp_lanes = 2; + break; + case UDPHY_MODE_USB: + fallthrough; + default: + dp_lanes = 0; + break; + } + + return dp_lanes; +} + +static int rk_udphy_dplane_enable(struct rk_udphy *udphy, int dp_lanes) +{ + u32 val = 0; + int i; + + for (i = 0; i < dp_lanes; i++) + val |= BIT(udphy->dp_lane_sel[i]); + + regmap_update_bits(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET, CMN_DP_LANE_EN_ALL, + FIELD_PREP(CMN_DP_LANE_EN_ALL, val)); + + if (!dp_lanes) + regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET, + CMN_DP_CMN_RSTN, FIELD_PREP(CMN_DP_CMN_RSTN, 0x0)); + + return 0; +} + +static int rk_udphy_dp_hpd_event_trigger(struct rk_udphy *udphy, bool hpd) +{ + const struct rk_udphy_cfg *cfg = udphy->cfgs; + + udphy->dp_sink_hpd_sel = true; + udphy->dp_sink_hpd_cfg = hpd; + + if (!udphy->dp_in_use) + return 0; + + rk_udphy_grfreg_write(udphy->vogrf, &cfg->vogrfcfg[udphy->id].hpd_trigger, hpd); + + return 0; +} + +static int rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy) +{ + if (udphy->flip) { + udphy->dp_lane_sel[0] = 0; + udphy->dp_lane_sel[1] = 1; + udphy->dp_lane_sel[2] = 3; + udphy->dp_lane_sel[3] = 2; + udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP; + udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP; + udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB; + udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB; + udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_INVERT; + udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_INVERT; + gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 1); + gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 0); + } else { + udphy->dp_lane_sel[0] = 2; + udphy->dp_lane_sel[1] = 3; + udphy->dp_lane_sel[2] = 1; + udphy->dp_lane_sel[3] = 0; + udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB; + udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB; + udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP; + udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP; + udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_NORMAL; + udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_NORMAL; + gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0); + gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 1); + } + + udphy->mode = UDPHY_MODE_DP_USB; + + return 0; +} + +static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw, + enum typec_orientation orien) +{ + struct rk_udphy *udphy = typec_switch_get_drvdata(sw); + + mutex_lock(&udphy->mutex); + + if (orien == TYPEC_ORIENTATION_NONE) { + gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0); + gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 0); + /* unattached */ + rk_udphy_usb_bvalid_enable(udphy, false); + goto unlock_ret; + } + + udphy->flip = (orien == TYPEC_ORIENTATION_REVERSE) ? true : false; + rk_udphy_set_typec_default_mapping(udphy); + rk_udphy_usb_bvalid_enable(udphy, true); + +unlock_ret: + mutex_unlock(&udphy->mutex); + return 0; +} + +static void rk_udphy_orien_switch_unregister(void *data) +{ + struct rk_udphy *udphy = data; + + typec_switch_unregister(udphy->sw); +} + +static int rk_udphy_setup_orien_switch(struct rk_udphy *udphy) +{ + struct typec_switch_desc sw_desc = { }; + + sw_desc.drvdata = udphy; + sw_desc.fwnode = dev_fwnode(udphy->dev); + sw_desc.set = rk_udphy_orien_sw_set; + + udphy->sw = typec_switch_register(udphy->dev, &sw_desc); + if (IS_ERR(udphy->sw)) { + dev_err(udphy->dev, "Error register typec orientation switch: %ld\n", + PTR_ERR(udphy->sw)); + return PTR_ERR(udphy->sw); + } + + return devm_add_action_or_reset(udphy->dev, + rk_udphy_orien_switch_unregister, udphy); +} + +static int rk_udphy_refclk_set(struct rk_udphy *udphy) +{ + unsigned long rate; + int ret; + + /* configure phy reference clock */ + rate = clk_get_rate(udphy->refclk); + dev_dbg(udphy->dev, "refclk freq %ld\n", rate); + + switch (rate) { + case 24000000: + ret = regmap_multi_reg_write(udphy->pma_regmap, rk_udphy_24m_refclk_cfg, + ARRAY_SIZE(rk_udphy_24m_refclk_cfg)); + if (ret) + return ret; + break; + case 26000000: + /* register default is 26MHz */ + ret = regmap_multi_reg_write(udphy->pma_regmap, rk_udphy_26m_refclk_cfg, + ARRAY_SIZE(rk_udphy_26m_refclk_cfg)); + if (ret) + return ret; + break; + default: + dev_err(udphy->dev, "unsupported refclk freq %ld\n", rate); + return -EINVAL; + } + + return 0; +} + +static int rk_udphy_status_check(struct rk_udphy *udphy) +{ + unsigned int val; + int ret; + + /* LCPLL check */ + if (udphy->mode & UDPHY_MODE_USB) { + ret = regmap_read_poll_timeout(udphy->pma_regmap, CMN_ANA_LCPLL_DONE_OFFSET, + val, (val & CMN_ANA_LCPLL_AFC_DONE) && + (val & CMN_ANA_LCPLL_LOCK_DONE), 200, 100000); + if (ret) { + dev_err(udphy->dev, "cmn ana lcpll lock timeout\n"); + /* + * If earlier software (U-Boot) enabled USB once already + * the PLL may have problems locking on the first try. + * It will be successful on the second try, so for the + * time being a -EPROBE_DEFER will solve the issue. + * + * This requires further investigation to understand the + * root cause, especially considering that the driver is + * asserting all reset lines at probe time. + */ + return -EPROBE_DEFER; + } + + if (!udphy->flip) { + ret = regmap_read_poll_timeout(udphy->pma_regmap, + TRSV_LN0_MON_RX_CDR_DONE_OFFSET, val, + val & TRSV_LN0_MON_RX_CDR_LOCK_DONE, + 200, 100000); + if (ret) + dev_err(udphy->dev, "trsv ln0 mon rx cdr lock timeout\n"); + } else { + ret = regmap_read_poll_timeout(udphy->pma_regmap, + TRSV_LN2_MON_RX_CDR_DONE_OFFSET, val, + val & TRSV_LN2_MON_RX_CDR_LOCK_DONE, + 200, 100000); + if (ret) + dev_err(udphy->dev, "trsv ln2 mon rx cdr lock timeout\n"); + } + } + + return 0; +} + +static int rk_udphy_init(struct rk_udphy *udphy) +{ + const struct rk_udphy_cfg *cfg = udphy->cfgs; + int ret; + + rk_udphy_reset_assert_all(udphy); + usleep_range(10000, 11000); + + /* enable rx lfps for usb */ + if (udphy->mode & UDPHY_MODE_USB) + rk_udphy_grfreg_write(udphy->udphygrf, &cfg->grfcfg.rx_lfps, true); + + /* Step 1: power on pma and deassert apb rstn */ + rk_udphy_grfreg_write(udphy->udphygrf, &cfg->grfcfg.low_pwrn, true); + + rk_udphy_reset_deassert(udphy, "pma_apb"); + rk_udphy_reset_deassert(udphy, "pcs_apb"); + + /* Step 2: set init sequence and phy refclk */ + ret = regmap_multi_reg_write(udphy->pma_regmap, rk_udphy_init_sequence, + ARRAY_SIZE(rk_udphy_init_sequence)); + if (ret) { + dev_err(udphy->dev, "init sequence set error %d\n", ret); + goto assert_resets; + } + + ret = rk_udphy_refclk_set(udphy); + if (ret) { + dev_err(udphy->dev, "refclk set error %d\n", ret); + goto assert_resets; + } + + /* Step 3: configure lane mux */ + regmap_update_bits(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET, + CMN_DP_LANE_MUX_ALL | CMN_DP_LANE_EN_ALL, + FIELD_PREP(CMN_DP_LANE_MUX_N(3), udphy->lane_mux_sel[3]) | + FIELD_PREP(CMN_DP_LANE_MUX_N(2), udphy->lane_mux_sel[2]) | + FIELD_PREP(CMN_DP_LANE_MUX_N(1), udphy->lane_mux_sel[1]) | + FIELD_PREP(CMN_DP_LANE_MUX_N(0), udphy->lane_mux_sel[0]) | + FIELD_PREP(CMN_DP_LANE_EN_ALL, 0)); + + /* Step 4: deassert init rstn and wait for 200ns from datasheet */ + if (udphy->mode & UDPHY_MODE_USB) + rk_udphy_reset_deassert(udphy, "init"); + + if (udphy->mode & UDPHY_MODE_DP) { + regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET, + CMN_DP_INIT_RSTN, + FIELD_PREP(CMN_DP_INIT_RSTN, 0x1)); + } + + udelay(1); + + /* Step 5: deassert cmn/lane rstn */ + if (udphy->mode & UDPHY_MODE_USB) { + rk_udphy_reset_deassert(udphy, "cmn"); + rk_udphy_reset_deassert(udphy, "lane"); + } + + /* Step 6: wait for lock done of pll */ + ret = rk_udphy_status_check(udphy); + if (ret) + goto assert_resets; + + return 0; + +assert_resets: + rk_udphy_reset_assert_all(udphy); + return ret; +} + +static int rk_udphy_setup(struct rk_udphy *udphy) +{ + int ret = 0; + + ret = clk_bulk_prepare_enable(udphy->num_clks, udphy->clks); + if (ret) { + dev_err(udphy->dev, "failed to enable clk\n"); + return ret; + } + + ret = rk_udphy_init(udphy); + if (ret) { + dev_err(udphy->dev, "failed to init combophy\n"); + clk_bulk_disable_unprepare(udphy->num_clks, udphy->clks); + return ret; + } + + return 0; +} + +static int rk_udphy_disable(struct rk_udphy *udphy) +{ + clk_bulk_disable_unprepare(udphy->num_clks, udphy->clks); + rk_udphy_reset_assert_all(udphy); + + return 0; +} + +static int rk_udphy_parse_lane_mux_data(struct rk_udphy *udphy) +{ + int ret, i, num_lanes; + + num_lanes = device_property_count_u32(udphy->dev, "rockchip,dp-lane-mux"); + if (num_lanes < 0) { + dev_dbg(udphy->dev, "no dp-lane-mux, following dp alt mode\n"); + udphy->mode = UDPHY_MODE_USB; + return 0; + } + + if (num_lanes != 2 && num_lanes != 4) + return dev_err_probe(udphy->dev, -EINVAL, + "invalid number of lane mux\n"); + + ret = device_property_read_u32_array(udphy->dev, "rockchip,dp-lane-mux", + udphy->dp_lane_sel, num_lanes); + if (ret) + return dev_err_probe(udphy->dev, ret, "get dp lane mux failed\n"); + + for (i = 0; i < num_lanes; i++) { + int j; + + if (udphy->dp_lane_sel[i] > 3) + return dev_err_probe(udphy->dev, -EINVAL, + "lane mux between 0 and 3, exceeding the range\n"); + + udphy->lane_mux_sel[udphy->dp_lane_sel[i]] = PHY_LANE_MUX_DP; + + for (j = i + 1; j < num_lanes; j++) { + if (udphy->dp_lane_sel[i] == udphy->dp_lane_sel[j]) + return dev_err_probe(udphy->dev, -EINVAL, + "set repeat lane mux value\n"); + } + } + + udphy->mode = UDPHY_MODE_DP; + if (num_lanes == 2) { + udphy->mode |= UDPHY_MODE_USB; + udphy->flip = (udphy->lane_mux_sel[0] == PHY_LANE_MUX_DP); + } + + return 0; +} + +static int rk_udphy_get_initial_status(struct rk_udphy *udphy) +{ + int ret; + u32 value; + + ret = clk_bulk_prepare_enable(udphy->num_clks, udphy->clks); + if (ret) { + dev_err(udphy->dev, "failed to enable clk\n"); + return ret; + } + + rk_udphy_reset_deassert_all(udphy); + + regmap_read(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET, &value); + if (FIELD_GET(CMN_DP_LANE_MUX_ALL, value) && FIELD_GET(CMN_DP_LANE_EN_ALL, value)) + udphy->status = UDPHY_MODE_DP; + else + rk_udphy_disable(udphy); + + return 0; +} + +static int rk_udphy_parse_dt(struct rk_udphy *udphy) +{ + struct device *dev = udphy->dev; + struct device_node *np = dev_of_node(dev); + enum usb_device_speed maximum_speed; + int ret; + + udphy->u2phygrf = syscon_regmap_lookup_by_phandle(np, "rockchip,u2phy-grf"); + if (IS_ERR(udphy->u2phygrf)) + return dev_err_probe(dev, PTR_ERR(udphy->u2phygrf), "failed to get u2phy-grf\n"); + + udphy->udphygrf = syscon_regmap_lookup_by_phandle(np, "rockchip,usbdpphy-grf"); + if (IS_ERR(udphy->udphygrf)) + return dev_err_probe(dev, PTR_ERR(udphy->udphygrf), "failed to get usbdpphy-grf\n"); + + udphy->usbgrf = syscon_regmap_lookup_by_phandle(np, "rockchip,usb-grf"); + if (IS_ERR(udphy->usbgrf)) + return dev_err_probe(dev, PTR_ERR(udphy->usbgrf), "failed to get usb-grf\n"); + + udphy->vogrf = syscon_regmap_lookup_by_phandle(np, "rockchip,vo-grf"); + if (IS_ERR(udphy->vogrf)) + return dev_err_probe(dev, PTR_ERR(udphy->vogrf), "failed to get vo-grf\n"); + + ret = rk_udphy_parse_lane_mux_data(udphy); + if (ret) + return ret; + + udphy->sbu1_dc_gpio = devm_gpiod_get_optional(dev, "sbu1-dc", GPIOD_OUT_LOW); + if (IS_ERR(udphy->sbu1_dc_gpio)) + return PTR_ERR(udphy->sbu1_dc_gpio); + + udphy->sbu2_dc_gpio = devm_gpiod_get_optional(dev, "sbu2-dc", GPIOD_OUT_LOW); + if (IS_ERR(udphy->sbu2_dc_gpio)) + return PTR_ERR(udphy->sbu2_dc_gpio); + + if (device_property_present(dev, "maximum-speed")) { + maximum_speed = usb_get_maximum_speed(dev); + udphy->hs = maximum_speed <= USB_SPEED_HIGH ? true : false; + } + + ret = rk_udphy_clk_init(udphy, dev); + if (ret) + return ret; + + ret = rk_udphy_reset_init(udphy, dev); + if (ret) + return ret; + + return 0; +} + +static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode) +{ + int ret; + + if (!(udphy->mode & mode)) { + dev_info(udphy->dev, "mode 0x%02x is not support\n", mode); + return 0; + } + + if (udphy->status == UDPHY_MODE_NONE) { + udphy->mode_change = false; + ret = rk_udphy_setup(udphy); + if (ret) + return ret; + + if (udphy->mode & UDPHY_MODE_USB) + rk_udphy_u3_port_disable(udphy, false); + } else if (udphy->mode_change) { + udphy->mode_change = false; + udphy->status = UDPHY_MODE_NONE; + if (udphy->mode == UDPHY_MODE_DP) + rk_udphy_u3_port_disable(udphy, true); + + ret = rk_udphy_disable(udphy); + if (ret) + return ret; + ret = rk_udphy_setup(udphy); + if (ret) + return ret; + } + + udphy->status |= mode; + + return 0; +} + +static int rk_udphy_power_off(struct rk_udphy *udphy, u8 mode) +{ + int ret; + + if (!(udphy->mode & mode)) { + dev_info(udphy->dev, "mode 0x%02x is not support\n", mode); + return 0; + } + + if (!udphy->status) + return 0; + + udphy->status &= ~mode; + + if (udphy->status == UDPHY_MODE_NONE) { + ret = rk_udphy_disable(udphy); + if (ret) + return ret; + } + + return 0; +} + +static int rk_udphy_dp_phy_init(struct phy *phy) +{ + struct rk_udphy *udphy = phy_get_drvdata(phy); + + mutex_lock(&udphy->mutex); + + udphy->dp_in_use = true; + rk_udphy_dp_hpd_event_trigger(udphy, udphy->dp_sink_hpd_cfg); + + mutex_unlock(&udphy->mutex); + + return 0; +} + +static int rk_udphy_dp_phy_exit(struct phy *phy) +{ + struct rk_udphy *udphy = phy_get_drvdata(phy); + + mutex_lock(&udphy->mutex); + udphy->dp_in_use = false; + mutex_unlock(&udphy->mutex); + return 0; +} + +static int rk_udphy_dp_phy_power_on(struct phy *phy) +{ + struct rk_udphy *udphy = phy_get_drvdata(phy); + int ret, dp_lanes; + + mutex_lock(&udphy->mutex); + + dp_lanes = rk_udphy_dplane_get(udphy); + phy_set_bus_width(phy, dp_lanes); + + ret = rk_udphy_power_on(udphy, UDPHY_MODE_DP); + if (ret) + goto unlock; + + ret = rk_udphy_dplane_enable(udphy, dp_lanes); + if (ret) + goto unlock; + + ret = rk_udphy_dplane_select(udphy); + +unlock: + mutex_unlock(&udphy->mutex); + /* + * If data send by aux channel too fast after phy power on, + * the aux may be not ready which will cause aux error. Adding + * delay to avoid this issue. + */ + usleep_range(10000, 11000); + return ret; +} + +static int rk_udphy_dp_phy_power_off(struct phy *phy) +{ + struct rk_udphy *udphy = phy_get_drvdata(phy); + int ret; + + mutex_lock(&udphy->mutex); + ret = rk_udphy_dplane_enable(udphy, 0); + if (ret) + goto unlock; + + ret = rk_udphy_power_off(udphy, UDPHY_MODE_DP); + +unlock: + mutex_unlock(&udphy->mutex); + return ret; +} + +static int rk_udphy_dp_phy_verify_link_rate(unsigned int link_rate) +{ + switch (link_rate) { + case 1620: + case 2700: + case 5400: + case 8100: + break; + default: + return -EINVAL; + } + + return 0; +} + +static int rk_udphy_dp_phy_verify_config(struct rk_udphy *udphy, + struct phy_configure_opts_dp *dp) +{ + int i, ret; + + /* If changing link rate was required, verify it's supported. */ + ret = rk_udphy_dp_phy_verify_link_rate(dp->link_rate); + if (ret) + return ret; + + /* Verify lane count. */ + switch (dp->lanes) { + case 1: + case 2: + case 4: + /* valid lane count. */ + break; + default: + return -EINVAL; + } + + /* + * If changing voltages is required, check swing and pre-emphasis + * levels, per-lane. + */ + if (dp->set_voltages) { + /* Lane count verified previously. */ + for (i = 0; i < dp->lanes; i++) { + if (dp->voltage[i] > 3 || dp->pre[i] > 3) + return -EINVAL; + + /* + * Sum of voltage swing and pre-emphasis levels cannot + * exceed 3. + */ + if (dp->voltage[i] + dp->pre[i] > 3) + return -EINVAL; + } + } + + return 0; +} + +static void rk_udphy_dp_set_voltage(struct rk_udphy *udphy, u8 bw, + u32 voltage, u32 pre, u32 lane) +{ + const struct rk_udphy_cfg *cfg = udphy->cfgs; + const struct rk_udphy_dp_tx_drv_ctrl (*dp_ctrl)[4]; + u32 offset = 0x800 * lane; + u32 val; + + if (udphy->mux) + dp_ctrl = cfg->dp_tx_ctrl_cfg_typec[bw]; + else + dp_ctrl = cfg->dp_tx_ctrl_cfg[bw]; + + val = dp_ctrl[voltage][pre].trsv_reg0204; + regmap_write(udphy->pma_regmap, 0x0810 + offset, val); + + val = dp_ctrl[voltage][pre].trsv_reg0205; + regmap_write(udphy->pma_regmap, 0x0814 + offset, val); + + val = dp_ctrl[voltage][pre].trsv_reg0206; + regmap_write(udphy->pma_regmap, 0x0818 + offset, val); + + val = dp_ctrl[voltage][pre].trsv_reg0207; + regmap_write(udphy->pma_regmap, 0x081c + offset, val); +} + +static int rk_udphy_dp_phy_configure(struct phy *phy, + union phy_configure_opts *opts) +{ + struct rk_udphy *udphy = phy_get_drvdata(phy); + struct phy_configure_opts_dp *dp = &opts->dp; + u32 i, val, lane; + int ret; + + ret = rk_udphy_dp_phy_verify_config(udphy, dp); + if (ret) + return ret; + + if (dp->set_rate) { + regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET, + CMN_DP_CMN_RSTN, FIELD_PREP(CMN_DP_CMN_RSTN, 0x0)); + + switch (dp->link_rate) { + case 1620: + udphy->bw = DP_BW_RBR; + break; + case 2700: + udphy->bw = DP_BW_HBR; + break; + case 5400: + udphy->bw = DP_BW_HBR2; + break; + case 8100: + udphy->bw = DP_BW_HBR3; + break; + default: + return -EINVAL; + } + + regmap_update_bits(udphy->pma_regmap, CMN_DP_LINK_OFFSET, CMN_DP_TX_LINK_BW, + FIELD_PREP(CMN_DP_TX_LINK_BW, udphy->bw)); + regmap_update_bits(udphy->pma_regmap, CMN_SSC_EN_OFFSET, CMN_ROPLL_SSC_EN, + FIELD_PREP(CMN_ROPLL_SSC_EN, dp->ssc)); + regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET, CMN_DP_CMN_RSTN, + FIELD_PREP(CMN_DP_CMN_RSTN, 0x1)); + + ret = regmap_read_poll_timeout(udphy->pma_regmap, CMN_ANA_ROPLL_DONE_OFFSET, val, + FIELD_GET(CMN_ANA_ROPLL_LOCK_DONE, val) && + FIELD_GET(CMN_ANA_ROPLL_AFC_DONE, val), + 0, 1000); + if (ret) { + dev_err(udphy->dev, "ROPLL is not lock, set_rate failed\n"); + return ret; + } + } + + if (dp->set_voltages) { + for (i = 0; i < dp->lanes; i++) { + lane = udphy->dp_lane_sel[i]; + switch (dp->link_rate) { + case 1620: + case 2700: + regmap_update_bits(udphy->pma_regmap, + TRSV_ANA_TX_CLK_OFFSET_N(lane), + LN_ANA_TX_SER_TXCLK_INV, + FIELD_PREP(LN_ANA_TX_SER_TXCLK_INV, + udphy->lane_mux_sel[lane])); + break; + case 5400: + case 8100: + regmap_update_bits(udphy->pma_regmap, + TRSV_ANA_TX_CLK_OFFSET_N(lane), + LN_ANA_TX_SER_TXCLK_INV, + FIELD_PREP(LN_ANA_TX_SER_TXCLK_INV, 0x0)); + break; + } + + rk_udphy_dp_set_voltage(udphy, udphy->bw, dp->voltage[i], + dp->pre[i], lane); + } + } + + return 0; +} + +static const struct phy_ops rk_udphy_dp_phy_ops = { + .init = rk_udphy_dp_phy_init, + .exit = rk_udphy_dp_phy_exit, + .power_on = rk_udphy_dp_phy_power_on, + .power_off = rk_udphy_dp_phy_power_off, + .configure = rk_udphy_dp_phy_configure, + .owner = THIS_MODULE, +}; + +static int rk_udphy_usb3_phy_init(struct phy *phy) +{ + struct rk_udphy *udphy = phy_get_drvdata(phy); + int ret = 0; + + mutex_lock(&udphy->mutex); + /* DP only or high-speed, disable U3 port */ + if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs) { + rk_udphy_u3_port_disable(udphy, true); + goto unlock; + } + + ret = rk_udphy_power_on(udphy, UDPHY_MODE_USB); + +unlock: + mutex_unlock(&udphy->mutex); + return ret; +} + +static int rk_udphy_usb3_phy_exit(struct phy *phy) +{ + struct rk_udphy *udphy = phy_get_drvdata(phy); + int ret = 0; + + mutex_lock(&udphy->mutex); + /* DP only or high-speed */ + if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs) + goto unlock; + + ret = rk_udphy_power_off(udphy, UDPHY_MODE_USB); + +unlock: + mutex_unlock(&udphy->mutex); + return ret; +} + +static const struct phy_ops rk_udphy_usb3_phy_ops = { + .init = rk_udphy_usb3_phy_init, + .exit = rk_udphy_usb3_phy_exit, + .owner = THIS_MODULE, +}; + +static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux, + struct typec_mux_state *state) +{ + struct rk_udphy *udphy = typec_mux_get_drvdata(mux); + u8 mode; + + mutex_lock(&udphy->mutex); + + switch (state->mode) { + case TYPEC_DP_STATE_C: + fallthrough; + case TYPEC_DP_STATE_E: + udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP; + udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP; + udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP; + udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP; + mode = UDPHY_MODE_DP; + break; + case TYPEC_DP_STATE_D: + fallthrough; + default: + if (udphy->flip) { + udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP; + udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP; + udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB; + udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB; + } else { + udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB; + udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB; + udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP; + udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP; + } + mode = UDPHY_MODE_DP_USB; + break; + } + + if (state->alt && state->alt->svid == USB_TYPEC_DP_SID) { + struct typec_displayport_data *data = state->data; + + if (!data) { + rk_udphy_dp_hpd_event_trigger(udphy, false); + } else if (data->status & DP_STATUS_IRQ_HPD) { + rk_udphy_dp_hpd_event_trigger(udphy, false); + usleep_range(750, 800); + rk_udphy_dp_hpd_event_trigger(udphy, true); + } else if (data->status & DP_STATUS_HPD_STATE) { + if (udphy->mode != mode) { + udphy->mode = mode; + udphy->mode_change = true; + } + rk_udphy_dp_hpd_event_trigger(udphy, true); + } else { + rk_udphy_dp_hpd_event_trigger(udphy, false); + } + } + + mutex_unlock(&udphy->mutex); + return 0; +} + +static void rk_udphy_typec_mux_unregister(void *data) +{ + struct rk_udphy *udphy = data; + + typec_mux_unregister(udphy->mux); +} + +static int rk_udphy_setup_typec_mux(struct rk_udphy *udphy) +{ + struct typec_mux_desc mux_desc = {}; + + mux_desc.drvdata = udphy; + mux_desc.fwnode = dev_fwnode(udphy->dev); + mux_desc.set = rk_udphy_typec_mux_set; + + udphy->mux = typec_mux_register(udphy->dev, &mux_desc); + if (IS_ERR(udphy->mux)) { + dev_err(udphy->dev, "Error register typec mux: %ld\n", + PTR_ERR(udphy->mux)); + return PTR_ERR(udphy->mux); + } + + return devm_add_action_or_reset(udphy->dev, rk_udphy_typec_mux_unregister, + udphy); +} + +static u32 rk_udphy_dp_get_max_link_rate(struct rk_udphy *udphy, + struct fwnode_handle *np) +{ + u32 max_link_rate; + int ret; + + ret = fwnode_property_read_u32(np, "max-link-rate", &max_link_rate); + if (ret) + return 8100; + + ret = rk_udphy_dp_phy_verify_link_rate(max_link_rate); + if (ret) { + dev_warn(udphy->dev, "invalid max-link-rate: %d\n", max_link_rate); + max_link_rate = 8100; + } + + return max_link_rate; +} + +static const struct regmap_config rk_udphy_pma_regmap_cfg = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .fast_io = true, + .max_register = 0x20dc, +}; + +static int rk_udphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct fwnode_handle *child; + struct phy_provider *phy_provider; + struct resource *res; + struct rk_udphy *udphy; + void __iomem *base; + int id, ret; + + udphy = devm_kzalloc(dev, sizeof(*udphy), GFP_KERNEL); + if (!udphy) + return -ENOMEM; + + udphy->cfgs = device_get_match_data(dev); + if (!udphy->cfgs) + return dev_err_probe(dev, -EINVAL, "missing match data\n"); + + base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(base)) + return PTR_ERR(base); + + /* find the phy-id from the io address */ + udphy->id = -ENODEV; + for (id = 0; id < udphy->cfgs->num_phys; id++) { + if (res->start == udphy->cfgs->phy_ids[id]) { + udphy->id = id; + break; + } + } + + if (udphy->id < 0) + return dev_err_probe(dev, -ENODEV, "no matching device found\n"); + + udphy->pma_regmap = devm_regmap_init_mmio(dev, base + UDPHY_PMA, + &rk_udphy_pma_regmap_cfg); + if (IS_ERR(udphy->pma_regmap)) + return PTR_ERR(udphy->pma_regmap); + + udphy->dev = dev; + ret = rk_udphy_parse_dt(udphy); + if (ret) + return ret; + + ret = rk_udphy_get_initial_status(udphy); + if (ret) + return ret; + + mutex_init(&udphy->mutex); + platform_set_drvdata(pdev, udphy); + + if (device_property_present(dev, "orientation-switch")) { + ret = rk_udphy_setup_orien_switch(udphy); + if (ret) + return ret; + } + + if (device_property_present(dev, "mode-switch")) { + ret = rk_udphy_setup_typec_mux(udphy); + if (ret) + return ret; + } + + fwnode_for_each_available_child_node(dev_fwnode(dev), child) { + const char *name = fwnode_get_name(child); + const struct phy_ops *ops; + struct phy *phy; + + if (!strcmp(name, "dp-port")) { + ops = &rk_udphy_dp_phy_ops; + } else if (!strcmp(name, "usb3-port")) { + ops = &rk_udphy_usb3_phy_ops; + } else { + /* e.g. ports node used by orientation switch */ + continue; + } + + phy = devm_phy_create(dev, to_of_node(child), ops); + if (IS_ERR(phy)) { + fwnode_handle_put(child); + ret = PTR_ERR(phy); + return dev_err_probe(dev, ret, "failed to create phy: %pfwP\n", child); + } + + if (ops == &rk_udphy_dp_phy_ops) { + phy_set_bus_width(phy, rk_udphy_dplane_get(udphy)); + phy->attrs.max_link_rate = rk_udphy_dp_get_max_link_rate(udphy, child); + } + + phy_set_drvdata(phy, udphy); + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + ret = PTR_ERR(phy_provider); + return dev_err_probe(dev, ret, "failed to register phy provider\n"); + } + + return 0; +} + +static int __maybe_unused rk_udphy_resume(struct device *dev) +{ + struct rk_udphy *udphy = dev_get_drvdata(dev); + + if (udphy->dp_sink_hpd_sel) + rk_udphy_dp_hpd_event_trigger(udphy, udphy->dp_sink_hpd_cfg); + + return 0; +} + +static const struct dev_pm_ops rk_udphy_pm_ops = { + SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, rk_udphy_resume) +}; + +static const char * const rk_udphy_rst_list[] = { + "init", "cmn", "lane", "pcs_apb", "pma_apb" +}; + +static const struct rk_udphy_cfg rk3588_udphy_cfgs = { + .num_phys = 2, + .phy_ids = { + 0xfed80000, + 0xfed90000, + }, + .num_rsts = ARRAY_SIZE(rk_udphy_rst_list), + .rst_list = rk_udphy_rst_list, + .grfcfg = { + /* u2phy-grf */ + .bvalid_phy_con = { 0x0008, 1, 0, 0x2, 0x3 }, + .bvalid_grf_con = { 0x0010, 3, 2, 0x2, 0x3 }, + + /* usb-grf */ + .usb3otg0_cfg = { 0x001c, 15, 0, 0x1100, 0x0188 }, + .usb3otg1_cfg = { 0x0034, 15, 0, 0x1100, 0x0188 }, + + /* usbdpphy-grf */ + .low_pwrn = { 0x0004, 13, 13, 0, 1 }, + .rx_lfps = { 0x0004, 14, 14, 0, 1 }, + }, + .vogrfcfg = { + { + .hpd_trigger = { 0x0000, 11, 10, 1, 3 }, + .dp_lane_reg = 0x0000, + }, + { + .hpd_trigger = { 0x0008, 11, 10, 1, 3 }, + .dp_lane_reg = 0x0008, + }, + }, + .dp_tx_ctrl_cfg = { + rk3588_dp_tx_drv_ctrl_rbr_hbr, + rk3588_dp_tx_drv_ctrl_rbr_hbr, + rk3588_dp_tx_drv_ctrl_hbr2, + rk3588_dp_tx_drv_ctrl_hbr3, + }, + .dp_tx_ctrl_cfg_typec = { + rk3588_dp_tx_drv_ctrl_rbr_hbr_typec, + rk3588_dp_tx_drv_ctrl_rbr_hbr_typec, + rk3588_dp_tx_drv_ctrl_hbr2, + rk3588_dp_tx_drv_ctrl_hbr3, + }, +}; + +static const struct of_device_id rk_udphy_dt_match[] = { + { + .compatible = "rockchip,rk3588-usbdp-phy", + .data = &rk3588_udphy_cfgs + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rk_udphy_dt_match); + +static struct platform_driver rk_udphy_driver = { + .probe = rk_udphy_probe, + .driver = { + .name = "rockchip-usbdp-phy", + .of_match_table = rk_udphy_dt_match, + .pm = &rk_udphy_pm_ops, + }, +}; +module_platform_driver(rk_udphy_driver); + +MODULE_AUTHOR("Frank Wang "); +MODULE_AUTHOR("Zhang Yubing "); +MODULE_DESCRIPTION("Rockchip USBDP Combo PHY driver"); +MODULE_LICENSE("GPL");