| Message ID | 20240726113207.3393247-6-xu.yang_2@nxp.com |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | [v2,1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty | expand |
Hi Shawn, On Fri, Jul 26, 2024 at 07:32:07PM +0800, Xu Yang wrote: > i.MX7ULP need properly set System Integration Module(SIM) module to make > usb wakeup work well. This will add a "nxp,sim" property for usbphy1. > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > --- > Changes in v2: > - no changes > --- > arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi > index ac338320ac1d..b093f2a447ae 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi > +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi > @@ -214,6 +214,7 @@ usbphy1: usb-phy@40350000 { > interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; > #phy-cells = <0>; > + nxp,sim = <&sim>; > }; > > usdhc0: mmc@40370000 { Could you please pick up patch 3 and 6? Thanks in advance! Best Regards, Xu Yang > -- > 2.34.1 >
On Mon, Aug 26, 2024 at 02:56:12PM +0800, Xu Yang wrote: > Hi Shawn, > > On Fri, Jul 26, 2024 at 07:32:07PM +0800, Xu Yang wrote: > > i.MX7ULP need properly set System Integration Module(SIM) module to make > > usb wakeup work well. This will add a "nxp,sim" property for usbphy1. > > > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > > > --- > > Changes in v2: > > - no changes > > --- > > arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi > > index ac338320ac1d..b093f2a447ae 100644 > > --- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi > > +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi > > @@ -214,6 +214,7 @@ usbphy1: usb-phy@40350000 { > > interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; > > clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; > > #phy-cells = <0>; > > + nxp,sim = <&sim>; > > }; > > > > usdhc0: mmc@40370000 { > > Could you please pick up patch 3 and 6? Patch #3 should go via usb tree, and ping me on #6 after #3 is applied. Shawn
On Wed, Aug 28, 2024 at 09:44:00AM +0800, Shawn Guo wrote: > On Mon, Aug 26, 2024 at 02:56:12PM +0800, Xu Yang wrote: > > Hi Shawn, > > > > On Fri, Jul 26, 2024 at 07:32:07PM +0800, Xu Yang wrote: > > > i.MX7ULP need properly set System Integration Module(SIM) module to make > > > usb wakeup work well. This will add a "nxp,sim" property for usbphy1. > > > > > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > > > > > --- > > > Changes in v2: > > > - no changes > > > --- > > > arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi | 1 + > > > 1 file changed, 1 insertion(+) > > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi > > > index ac338320ac1d..b093f2a447ae 100644 > > > --- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi > > > +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi > > > @@ -214,6 +214,7 @@ usbphy1: usb-phy@40350000 { > > > interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; > > > clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; > > > #phy-cells = <0>; > > > + nxp,sim = <&sim>; > > > }; > > > > > > usdhc0: mmc@40370000 { > > > > Could you please pick up patch 3 and 6? > > Patch #3 should go via usb tree, and ping me on #6 after #3 is applied. Okay. Thanks, Xu Yang > > Shawn >
diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi index ac338320ac1d..b093f2a447ae 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi @@ -214,6 +214,7 @@ usbphy1: usb-phy@40350000 { interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; #phy-cells = <0>; + nxp,sim = <&sim>; }; usdhc0: mmc@40370000 {
i.MX7ULP need properly set System Integration Module(SIM) module to make usb wakeup work well. This will add a "nxp,sim" property for usbphy1. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> --- Changes in v2: - no changes --- arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi | 1 + 1 file changed, 1 insertion(+)