| Message ID | 20240822152801.602318-3-claudiu.beznea.uj@bp.renesas.com |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | Add initial USB support for the Renesas RZ/G3S SoC | expand |
On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > The RZ/G3S System controller has registers to control signals that need > to be de-asserted/asserted before/after different SoC areas are power > on/off. This signals are implemented as reset signals. For this document > the #reset-cells property. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > --- > .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > index 4386b2c3fa4d..6b0bb34485d9 100644 > --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > @@ -42,12 +42,28 @@ properties: > - const: cm33stbyr_int > - const: ca55_deny > > + "#reset-cells": > + const: 1 > + > required: > - compatible > - reg > > additionalProperties: false > > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: renesas,r9a08g045-sysc > + then: > + required: > + - "#reset-cells" Given this is new required property on an existing platform, I'd expect some mention of why it used to be okay to not have this but is now required. Did firmware or a bootloader stage take things out of reset? > + else: > + properties: > + "#reset-cells": false > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > -- > 2.39.2 >
On Thu, Aug 22, 2024 at 05:42:57PM +0100, Conor Dooley wrote: > On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote: > > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > > > The RZ/G3S System controller has registers to control signals that need > > to be de-asserted/asserted before/after different SoC areas are power > > on/off. This signals are implemented as reset signals. For this document > > the #reset-cells property. > > > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > --- > > .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++ > > 1 file changed, 16 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > > index 4386b2c3fa4d..6b0bb34485d9 100644 > > --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > > +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > > @@ -42,12 +42,28 @@ properties: > > - const: cm33stbyr_int > > - const: ca55_deny > > > > + "#reset-cells": > > + const: 1 > > + > > required: > > - compatible > > - reg > > > > additionalProperties: false > > > > +allOf: > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: renesas,r9a08g045-sysc > > + then: > > + required: > > + - "#reset-cells" > > Given this is new required property on an existing platform, I'd expect > some mention of why it used to be okay to not have this but is now > required. Did firmware or a bootloader stage take things out of reset? Reading a bit more into the series, the peripherals in question were just never used nor did a driver for the sysc exist, so there's neither explanation of prior behaviour nor concerns about compatibility? > > > + else: > > + properties: > > + "#reset-cells": false > > + > > examples: > > - | > > #include <dt-bindings/interrupt-controller/arm-gic.h> > > -- > > 2.39.2 > >
Hi, Conor, On 22.08.2024 19:42, Conor Dooley wrote: > On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote: >> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >> >> The RZ/G3S System controller has registers to control signals that need >> to be de-asserted/asserted before/after different SoC areas are power >> on/off. This signals are implemented as reset signals. For this document >> the #reset-cells property. >> >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >> --- >> .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >> index 4386b2c3fa4d..6b0bb34485d9 100644 >> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >> @@ -42,12 +42,28 @@ properties: >> - const: cm33stbyr_int >> - const: ca55_deny >> >> + "#reset-cells": >> + const: 1 >> + >> required: >> - compatible >> - reg >> >> additionalProperties: false >> >> +allOf: >> + - if: >> + properties: >> + compatible: >> + contains: >> + const: renesas,r9a08g045-sysc >> + then: >> + required: >> + - "#reset-cells" > > Given this is new required property on an existing platform, I'd expect > some mention of why it used to be okay to not have this but is now > required. Did firmware or a bootloader stage take things out of reset? On previous SoCs the SYS controller has no support for controlling the signals going to different peripherals (USB, PCIE in case of RZ/G3S). I'll add a note about this on next version. Thank you, Claudiu Beznea > >> + else: >> + properties: >> + "#reset-cells": false >> + >> examples: >> - | >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> -- >> 2.39.2 >>
On 22.08.2024 19:44, Conor Dooley wrote: > On Thu, Aug 22, 2024 at 05:42:57PM +0100, Conor Dooley wrote: >> On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote: >>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >>> >>> The RZ/G3S System controller has registers to control signals that need >>> to be de-asserted/asserted before/after different SoC areas are power >>> on/off. This signals are implemented as reset signals. For this document >>> the #reset-cells property. >>> >>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >>> --- >>> .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++ >>> 1 file changed, 16 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >>> index 4386b2c3fa4d..6b0bb34485d9 100644 >>> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >>> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >>> @@ -42,12 +42,28 @@ properties: >>> - const: cm33stbyr_int >>> - const: ca55_deny >>> >>> + "#reset-cells": >>> + const: 1 >>> + >>> required: >>> - compatible >>> - reg >>> >>> additionalProperties: false >>> >>> +allOf: >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + const: renesas,r9a08g045-sysc >>> + then: >>> + required: >>> + - "#reset-cells" >> >> Given this is new required property on an existing platform, I'd expect >> some mention of why it used to be okay to not have this but is now >> required. Did firmware or a bootloader stage take things out of reset? > > Reading a bit more into the series, the peripherals in question were > just never used nor did a driver for the sysc exist, so there's neither Exactly. > explanation of prior behaviour nor concerns about compatibility? The newly introduced sysc driver is probed only for RZ/G3S and used to control the USB, PCIe signals though reset control driver (registered by sysc driver on auxiliary bus) and to identify the chip. The intention is to later migrate the chip identification support for the rest of RZ/G2 devices to this new driver and add more functionalities, when/if needed. Thank you, Claudiu Beznea > >> >>> + else: >>> + properties: >>> + "#reset-cells": false >>> + >>> examples: >>> - | >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> -- >>> 2.39.2 >>> > >
On Fri, Aug 23, 2024 at 10:54:06AM +0300, claudiu beznea wrote: > Hi, Conor, > > On 22.08.2024 19:42, Conor Dooley wrote: > > On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote: > >> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > >> > >> The RZ/G3S System controller has registers to control signals that need > >> to be de-asserted/asserted before/after different SoC areas are power > >> on/off. This signals are implemented as reset signals. For this document > >> the #reset-cells property. > >> > >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > >> --- > >> .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++ > >> 1 file changed, 16 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > >> index 4386b2c3fa4d..6b0bb34485d9 100644 > >> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > >> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > >> @@ -42,12 +42,28 @@ properties: > >> - const: cm33stbyr_int > >> - const: ca55_deny > >> > >> + "#reset-cells": > >> + const: 1 > >> + > >> required: > >> - compatible > >> - reg > >> > >> additionalProperties: false > >> > >> +allOf: > >> + - if: > >> + properties: > >> + compatible: > >> + contains: > >> + const: renesas,r9a08g045-sysc > >> + then: > >> + required: > >> + - "#reset-cells" > > > > Given this is new required property on an existing platform, I'd expect > > some mention of why it used to be okay to not have this but is now > > required. Did firmware or a bootloader stage take things out of reset? > > On previous SoCs the SYS controller has no support for controlling the > signals going to different peripherals (USB, PCIE in case of RZ/G3S). > I'll add a note about this on next version. My initial thought here wasn't about previous SoCs though, it was because you didn't add the compatible in this series for /this/ SoC. What's worth noting isn't about the prior SoCs, it is about what makes it okay for this one.
On 23.08.2024 19:18, Conor Dooley wrote: > On Fri, Aug 23, 2024 at 10:54:06AM +0300, claudiu beznea wrote: >> Hi, Conor, >> >> On 22.08.2024 19:42, Conor Dooley wrote: >>> On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote: >>>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >>>> >>>> The RZ/G3S System controller has registers to control signals that need >>>> to be de-asserted/asserted before/after different SoC areas are power >>>> on/off. This signals are implemented as reset signals. For this document >>>> the #reset-cells property. >>>> >>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >>>> --- >>>> .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++ >>>> 1 file changed, 16 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >>>> index 4386b2c3fa4d..6b0bb34485d9 100644 >>>> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >>>> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >>>> @@ -42,12 +42,28 @@ properties: >>>> - const: cm33stbyr_int >>>> - const: ca55_deny >>>> >>>> + "#reset-cells": >>>> + const: 1 >>>> + >>>> required: >>>> - compatible >>>> - reg >>>> >>>> additionalProperties: false >>>> >>>> +allOf: >>>> + - if: >>>> + properties: >>>> + compatible: >>>> + contains: >>>> + const: renesas,r9a08g045-sysc >>>> + then: >>>> + required: >>>> + - "#reset-cells" >>> >>> Given this is new required property on an existing platform, I'd expect >>> some mention of why it used to be okay to not have this but is now >>> required. Did firmware or a bootloader stage take things out of reset? >> >> On previous SoCs the SYS controller has no support for controlling the >> signals going to different peripherals (USB, PCIE in case of RZ/G3S). >> I'll add a note about this on next version. > > My initial thought here wasn't about previous SoCs though, it was > because you didn't add the compatible in this series for /this/ SoC. RZ/G3S compatible is already present in this file: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml#n26 Thank you, Claudiu Beznea > What's worth noting isn't about the prior SoCs, it is about what makes > it okay for this one.
On Fri, Aug 23, 2024 at 07:26:42PM +0300, claudiu beznea wrote: > On 23.08.2024 19:18, Conor Dooley wrote: > > On Fri, Aug 23, 2024 at 10:54:06AM +0300, claudiu beznea wrote: > >> Hi, Conor, > >> > >> On 22.08.2024 19:42, Conor Dooley wrote: > >>> On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote: > >>>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > >>>> > >>>> The RZ/G3S System controller has registers to control signals that need > >>>> to be de-asserted/asserted before/after different SoC areas are power > >>>> on/off. This signals are implemented as reset signals. For this document > >>>> the #reset-cells property. > >>>> > >>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > >>>> --- > >>>> .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++ > >>>> 1 file changed, 16 insertions(+) > >>>> > >>>> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > >>>> index 4386b2c3fa4d..6b0bb34485d9 100644 > >>>> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > >>>> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > >>>> @@ -42,12 +42,28 @@ properties: > >>>> - const: cm33stbyr_int > >>>> - const: ca55_deny > >>>> > >>>> + "#reset-cells": > >>>> + const: 1 > >>>> + > >>>> required: > >>>> - compatible > >>>> - reg > >>>> > >>>> additionalProperties: false > >>>> > >>>> +allOf: > >>>> + - if: > >>>> + properties: > >>>> + compatible: > >>>> + contains: > >>>> + const: renesas,r9a08g045-sysc > >>>> + then: > >>>> + required: > >>>> + - "#reset-cells" > >>> > >>> Given this is new required property on an existing platform, I'd expect > >>> some mention of why it used to be okay to not have this but is now > >>> required. Did firmware or a bootloader stage take things out of reset? > >> > >> On previous SoCs the SYS controller has no support for controlling the > >> signals going to different peripherals (USB, PCIE in case of RZ/G3S). > >> I'll add a note about this on next version. > > > > My initial thought here wasn't about previous SoCs though, it was > > because you didn't add the compatible in this series for /this/ SoC. > > RZ/G3S compatible is already present in this file: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml#n26 I know, first thing I did when I read the original patch was open the file ;) I don't care about the old SoCs, cos you're not applying the property to them, so what's changed between SoCs isn't really relevant. It's a mention of why, on this SoC, it is safe to add new required properties that I want. AFAIU the answer is that no consumer of the resets existed before, so there's not some special state there, and I am guessing that the new sysc driver you're adding isn't going to fail to probe if there are no resets, it just won't register a reset controller? Which is fine, cos all devicetrees that have the new peripherals will have #reset-cells etc. > > What's worth noting isn't about the prior SoCs, it is about what makes > > it okay for this one.
On 23.08.2024 19:33, Conor Dooley wrote: > On Fri, Aug 23, 2024 at 07:26:42PM +0300, claudiu beznea wrote: >> On 23.08.2024 19:18, Conor Dooley wrote: >>> On Fri, Aug 23, 2024 at 10:54:06AM +0300, claudiu beznea wrote: >>>> Hi, Conor, >>>> >>>> On 22.08.2024 19:42, Conor Dooley wrote: >>>>> On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote: >>>>>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >>>>>> >>>>>> The RZ/G3S System controller has registers to control signals that need >>>>>> to be de-asserted/asserted before/after different SoC areas are power >>>>>> on/off. This signals are implemented as reset signals. For this document >>>>>> the #reset-cells property. >>>>>> >>>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >>>>>> --- >>>>>> .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++ >>>>>> 1 file changed, 16 insertions(+) >>>>>> >>>>>> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >>>>>> index 4386b2c3fa4d..6b0bb34485d9 100644 >>>>>> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >>>>>> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml >>>>>> @@ -42,12 +42,28 @@ properties: >>>>>> - const: cm33stbyr_int >>>>>> - const: ca55_deny >>>>>> >>>>>> + "#reset-cells": >>>>>> + const: 1 >>>>>> + >>>>>> required: >>>>>> - compatible >>>>>> - reg >>>>>> >>>>>> additionalProperties: false >>>>>> >>>>>> +allOf: >>>>>> + - if: >>>>>> + properties: >>>>>> + compatible: >>>>>> + contains: >>>>>> + const: renesas,r9a08g045-sysc >>>>>> + then: >>>>>> + required: >>>>>> + - "#reset-cells" >>>>> >>>>> Given this is new required property on an existing platform, I'd expect >>>>> some mention of why it used to be okay to not have this but is now >>>>> required. Did firmware or a bootloader stage take things out of reset? >>>> >>>> On previous SoCs the SYS controller has no support for controlling the >>>> signals going to different peripherals (USB, PCIE in case of RZ/G3S). >>>> I'll add a note about this on next version. >>> >>> My initial thought here wasn't about previous SoCs though, it was >>> because you didn't add the compatible in this series for /this/ SoC. >> >> RZ/G3S compatible is already present in this file: >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml#n26 > > I know, first thing I did when I read the original patch was open the > file ;) > I don't care about the old SoCs, cos you're not applying the property to > them, so what's changed between SoCs isn't really relevant. It's a mention > of why, on this SoC, it is safe to add new required properties that I want. > > AFAIU the answer is that no consumer of the resets existed before, so That's true. > there's not some special state there, and I am guessing that the new > sysc driver you're adding isn't going to fail to probe if there are no > resets, That's true. it just won't register a reset controller? It will register it but, the new sysc driver is going to probe only for this SoC (RZ/G3S). On RZ/G3S we have 2 resets. These well be registered unconditionally, currently, only for RZ/G3S. If there will be no DT users for it then it should be no problem, AFAICT. SYSC variants have common features b/w different SoC variants (one of them being chip identification). The feature implemented though reset controller in this series is not common but particular to RZ/G3S. When the SYSC will be extended for other SoCs the reset driver registration would have to be adapted to not be registered. At the moment, as the SYC is compatible only with RZ/G3S and the reset driver is registered on auxiliary bus though SYSC there is no restriction, reset is registered all the time, but SYSC is only compatible with RZ/G3S. > Which is fine, cos all > devicetrees that have the new peripherals will have #reset-cells etc. > >>> What's worth noting isn't about the prior SoCs, it is about what makes >>> it okay for this one.
On Mon, Aug 26, 2024 at 01:15:43PM +0300, claudiu beznea wrote: > > > On 23.08.2024 19:33, Conor Dooley wrote: > > On Fri, Aug 23, 2024 at 07:26:42PM +0300, claudiu beznea wrote: > >> On 23.08.2024 19:18, Conor Dooley wrote: > >>> On Fri, Aug 23, 2024 at 10:54:06AM +0300, claudiu beznea wrote: > >>>> Hi, Conor, > >>>> > >>>> On 22.08.2024 19:42, Conor Dooley wrote: > >>>>> On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote: > >>>>>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > >>>>>> > >>>>>> The RZ/G3S System controller has registers to control signals that need > >>>>>> to be de-asserted/asserted before/after different SoC areas are power > >>>>>> on/off. This signals are implemented as reset signals. For this document > >>>>>> the #reset-cells property. > >>>>>> > >>>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > >>>>>> --- > >>>>>> .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++ > >>>>>> 1 file changed, 16 insertions(+) > >>>>>> > >>>>>> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > >>>>>> index 4386b2c3fa4d..6b0bb34485d9 100644 > >>>>>> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > >>>>>> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml > >>>>>> @@ -42,12 +42,28 @@ properties: > >>>>>> - const: cm33stbyr_int > >>>>>> - const: ca55_deny > >>>>>> > >>>>>> + "#reset-cells": > >>>>>> + const: 1 > >>>>>> + > >>>>>> required: > >>>>>> - compatible > >>>>>> - reg > >>>>>> > >>>>>> additionalProperties: false > >>>>>> > >>>>>> +allOf: > >>>>>> + - if: > >>>>>> + properties: > >>>>>> + compatible: > >>>>>> + contains: > >>>>>> + const: renesas,r9a08g045-sysc > >>>>>> + then: > >>>>>> + required: > >>>>>> + - "#reset-cells" > >>>>> > >>>>> Given this is new required property on an existing platform, I'd expect > >>>>> some mention of why it used to be okay to not have this but is now > >>>>> required. Did firmware or a bootloader stage take things out of reset? > >>>> > >>>> On previous SoCs the SYS controller has no support for controlling the > >>>> signals going to different peripherals (USB, PCIE in case of RZ/G3S). > >>>> I'll add a note about this on next version. > >>> > >>> My initial thought here wasn't about previous SoCs though, it was > >>> because you didn't add the compatible in this series for /this/ SoC. > >> > >> RZ/G3S compatible is already present in this file: > >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml#n26 > > > > I know, first thing I did when I read the original patch was open the > > file ;) > > I don't care about the old SoCs, cos you're not applying the property to > > them, so what's changed between SoCs isn't really relevant. It's a mention > > of why, on this SoC, it is safe to add new required properties that I want. > > > > > > AFAIU the answer is that no consumer of the resets existed before, so > > That's true. > > > there's not some special state there, and I am guessing that the new > > sysc driver you're adding isn't going to fail to probe if there are no > > resets, > > That's true. > > it just won't register a reset controller? > > It will register it but, > > the new sysc driver is going to probe only for this SoC (RZ/G3S). On RZ/G3S > we have 2 resets. These well be registered unconditionally, currently, only > for RZ/G3S. If there will be no DT users for it then it should be no > problem, AFAICT. Okay, sounds it doesn't break for existing devicetrees. Acked-by: Conor Dooley <conor.dooley@microchip.com> Thanks, Conor.
On Thu, Aug 22, 2024 at 5:28 PM Claudiu <claudiu.beznea@tuxon.dev> wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > The RZ/G3S System controller has registers to control signals that need > to be de-asserted/asserted before/after different SoC areas are power > on/off. This signals are implemented as reset signals. For this document > the #reset-cells property. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert
diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml index 4386b2c3fa4d..6b0bb34485d9 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml @@ -42,12 +42,28 @@ properties: - const: cm33stbyr_int - const: ca55_deny + "#reset-cells": + const: 1 + required: - compatible - reg additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: renesas,r9a08g045-sysc + then: + required: + - "#reset-cells" + else: + properties: + "#reset-cells": false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h>