@@ -355,40 +355,6 @@ to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
}
-static void
-fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
- const struct phy_config *cfg)
-{
- u8 div = 0x1;
-
- switch (cfg->pixclk) {
- case 22250000 ... 33750000:
- div = 0xf;
- break;
- case 35000000 ... 40000000:
- div = 0xb;
- break;
- case 43200000 ... 47500000:
- div = 0x9;
- break;
- case 50349650 ... 63500000:
- div = 0x7;
- break;
- case 67500000 ... 90000000:
- div = 0x5;
- break;
- case 94000000 ... 148500000:
- div = 0x3;
- break;
- case 154000000 ... 297000000:
- div = 0x1;
- break;
- }
-
- writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
- phy->regs + PHY_REG(21));
-}
-
static void
fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
const struct phy_config *cfg)
@@ -457,7 +423,10 @@ static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG(2) + i * 4);
- fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
+ /* High nibble of pll_div_regs[1] contains S which also gets written to REG21 */
+ writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK,
+ cfg->pll_div_regs[1] >> 4), phy->regs + PHY_REG(21));
+
fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG(33));
The value of 'S' is writen to two places, PHY_REG3[7:4] and PHY_REG21[3:0]. There is a lookup table which contains the value of PHY_REG3. Rather than using a switch statement based on the pixel clock to search for the value of 'S' again, just shift the contents of PHY_REG3[7:4] >> 4 and place the value in PHY_REG21[3:0]. Doing this can eliminate an entire function. Signed-off-by: Adam Ford <aford173@gmail.com> --- V3: New to series