[RFC,1/3] phy: don't let controllers change vbus reg

Commit Message

Philippe Simons Jan. 18, 2025, 10:22 a.m. UTC

Allwinners SoCs share phy0 between the MUSB controller and HCI controller.
If we let these controllers independently power on the vbus on that phy,
peripheral mode is dangerous because HCI never power down the phy, resulting
in 5v being applied against the host 5v.

Override power_on/off for phy0 in that case, and let regulator be enabled/disabled
based on id_det only.

Signed-off-by: Philippe Simons <[e-mail]>
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Patch

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index b0f19e950..24fbabe7a 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -465,6 +465,10 @@  static int sun4i_usb_phy_power_on(struct phy *_phy)
 	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
 	int ret;
 
+	/* phy0 power is controlled by sun4i_usb_phy0_reroute and id_det state */
+	if (phy->index == 0 && data->cfg->phy0_dual_route)
+		return 0;
+
 	if (!phy->vbus || phy->regulator_on)
 		return 0;
 
@@ -493,6 +497,10 @@  static int sun4i_usb_phy_power_off(struct phy *_phy)
 	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
 	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
 
+	/* phy0 power is controlled by sun4i_usb_phy0_reroute and id_det state */
+	if (phy->index == 0 && data->cfg->phy0_dual_route)
+		return 0;
+
 	if (!phy->vbus || !phy->regulator_on)
 		return 0;
 
@@ -573,9 +581,21 @@  static void sun4i_usb_phy0_reroute(struct sun4i_usb_phy_data *data, int id_det)
 	if (id_det == 0) {
 		/* Host mode. Route phy0 to EHCI/OHCI */
 		regval &= ~OTGCTL_ROUTE_MUSB;
+
+		/* Enable VBUS reg */
+		if (phy->vbus && !phy->regulator_on) {
+			regulator_enable(phy->vbus);
+			phy->regulator_on = true;
+		}
 	} else {
 		/* Peripheral mode. Route phy0 to MUSB */
 		regval |= OTGCTL_ROUTE_MUSB;
+		
+		/* Disable VBUS reg */
+		if (phy->vbus && phy->regulator_on) {
+			regulator_disable(phy->vbus);
+			phy->regulator_on = false;
+		}
 	}
 	writel(regval, data->base + REG_PHY_OTGCTL);
 }
@@ -603,6 +623,12 @@  static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 		return;
 	}
 
+	/* Disable internal VBUS reg if there is an external VBUS */
+	if (vbus_det != 0 && phy->vbus && phy->regulator_on) {
+		regulator_disable(phy->vbus);
+		phy->regulator_on = false;
+	}
+
 	force_session_end = data->force_session_end;
 	data->force_session_end = false;