diff mbox series

[v2,5/6] arm64: dts: qcom: sm8750: Add UFS nodes for SM8750 MTP

Message ID 20250310-sm8750_ufs_master-v2-5-0dfdd6823161@quicinc.com
State New
Headers show
Series Add UFS support for SM8750 | expand

Commit Message

Melody Olvera March 10, 2025, 9:12 p.m. UTC 
From: Nitin Rawat <quic_nitirawa@quicinc.com>

Add UFS host controller and PHY nodes for SM8750 MTP board.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

Manivannan Sadhasivam March 18, 2025, 5:30 a.m. UTC | #1 
On Mon, Mar 10, 2025 at 02:12:33PM -0700, Melody Olvera wrote:
> From: Nitin Rawat <quic_nitirawa@quicinc.com>
> 
> Add UFS host controller and PHY nodes for SM8750 MTP board.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Co-developed-by: Manish Pandey <quic_mapa@quicinc.com>
> Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
> index 9e3aacad7bdab6848e86f8e45e04907e1c752a07..9d34159e73948e7f3f939593d1ace444cc5dcd15 100644
> --- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
> @@ -792,3 +792,21 @@ &tlmm {
>  &uart7 {
>  	status = "okay";
>  };
> +
> +&ufs_mem_phy {
> +	vdda-phy-supply = <&vreg_l1j_0p91>;
> +	vdda-pll-supply = <&vreg_l3g_1p2>;
> +
> +	status = "okay";
> +};
> +
> +&ufs_mem_hc {
> +	reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
> +
> +	vcc-supply = <&vreg_l17b_2p5>;
> +	vcc-max-microamp = <1300000>;
> +	vccq-supply = <&vreg_l1d_1p2>;
> +	vccq-max-microamp = <1200000>;
> +
> +	status = "okay";
> +};
> 
> -- 
> 2.46.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 9e3aacad7bdab6848e86f8e45e04907e1c752a07..9d34159e73948e7f3f939593d1ace444cc5dcd15 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -792,3 +792,21 @@  &tlmm {
 &uart7 {
 	status = "okay";
 };
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1j_0p91>;
+	vdda-pll-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1d_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};