| Message ID | Y58jOP0HrtMxuP3y@matsya |
|---|---|
| State | Accepted |
| Commit | e79041113b19b8c7b8410d862d4a3630debded58 |
| Headers | show |
| Series | [GIT,PULL] : Generic phy updates for 6.2 | expand |
Hi Vinod, On Sun, Dec 18, 2022 at 07:57:04PM +0530, Vinod Koul wrote: > ---------------------------------------------------------------- > phy-for-6.2 > > - New support: > - Allwinner H616 USB PHY and A100 DPHY support > - TI J721s2, J784s4 and J721e support > - Freescale i.MX8MP PCIe PHY support > - New driver for Renesas Ethernet SERDES supporting R-Car S4-8 > - Qualcomm SM8450 PCIe1 PHY support in EP mode You could also have mentioned - Qualcomm SC8280XP PCIe PHY support (including x4 mode) - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings which were the primary reasons for reworking the QMP drivers and DT bindings, something which also lead to a number of bugs in these drivers being found and fixed. > - Updates: > - again a big pile of updates on qcom-qmp-* drivers following the > driver split and reorganization merged earlier > - Phy order of API calls documentation update > > ---------------------------------------------------------------- > Johan Hovold (131): > phy: qcom-qmp: fix obsolete lane comments > phy: qcom-qmp-combo: drop unused UFS reset > phy: qcom-qmp-pcie: drop unused common-block registers > phy: qcom-qmp-pcie: clean up power-down handling > phy: qcom-qmp-pcie: move power-down update > phy: qcom-qmp-pcie-msm8996: clean up power-down handling > phy: qcom-qmp-combo: clean up power-down handling > phy: qcom-qmp-ufs: clean up power-down handling > phy: qcom-qmp-usb: clean up power-down handling > phy: qcom-qmp-pcie: clean up clock lists > phy: qcom-qmp-pcie: drop bogus register update > phy: qcom-qmp: drop regulator error message > phy: qcom-qmp: drop superfluous comments > phy: qcom-qmp-combo: drop unused in-layout configuration > phy: qcom-qmp-pcie: drop redundant ipq8074 power on > phy: qcom-qmp-pcie-msm8996: drop unused in-layout configuration > phy: qcom-qmp-ufs: drop unused in-layout configuration > phy: qcom-qmp-usb: drop unused in-layout configuration > phy: qcom-qmp-pcie: drop power-down delay config > phy: qcom-qmp-pcie: replace power-down delay > phy: qcom-qmp-pcie-msm8996: drop power-down delay config > phy: qcom-qmp-combo: drop sc8280xp power-down delay > phy: qcom-qmp-combo: drop power-down delay config > phy: qcom-qmp-usb: drop sc8280xp power-down delay > phy: qcom-qmp-usb: drop power-down delay config > phy: qcom-qmp-pcie: fix sc8180x initialisation > phy: qcom-qmp-pcie: fix ipq8074-gen3 initialisation > phy: qcom-qmp-pcie: fix ipq6018 initialisation > phy: qcom-qmp-pcie: clean up status polling > phy: qcom-qmp-pcie: increase status polling period > phy: qcom-qmp-pcie-msm8996: clean up ready and status polling > phy: qcom-qmp-pcie-msm8996: increase status polling period > phy: qcom-qmp-combo: clean up status polling > phy: qcom-qmp-combo: increase status polling period > phy: qcom-qmp-ufs: drop unused phy-status config > phy: qcom-qmp-ufs: clean up ready polling > phy: qcom-qmp-ufs: increase ready polling period > phy: qcom-qmp-usb: clean up status polling > phy: qcom-qmp-usb: increase status polling period > phy: qcom-qmp-combo: drop start and pwrdn-ctrl abstraction > phy: qcom-qmp-pcie: drop start-ctrl abstraction > phy: qcom-qmp-pcie: add config sanity checks > phy: qcom-qmp-pcie-msm8996: drop start and pwrdn-ctrl abstraction > phy: qcom-qmp-ufs: drop start and pwrdn-ctrl abstraction > phy: qcom-qmp-usb: drop start and pwrdn-ctrl abstraction > phy: qcom-qmp-combo: fix NULL-deref on runtime resume > phy: qcom-qmp-ufs: move device-id table > phy: qcom-qmp-ufs: merge driver data > phy: qcom-qmp-ufs: clean up device-tree parsing > phy: qcom-qmp-ufs: clean up probe initialisation > phy: qcom-qmp-ufs: rename PHY ops structure > phy: qcom-qmp-ufs: clean up PHY init > dt-bindings: phy: qcom,qmp-ufs: rename current bindings > dt-bindings: phy: qcom,qmp-ufs: fix sc8280xp binding > phy: qcom-qmp-ufs: restructure PHY creation > phy: qcom-qmp-ufs: add support for updated sc8280xp binding > phy: qcom-qmp-usb: fix sc8280xp PCS_USB offset > phy: qcom-qmp-usb: sort device-id table > phy: qcom-qmp-usb: move device-id table > phy: qcom-qmp-usb: move pm ops > phy: qcom-qmp-usb: merge driver data > phy: qcom-qmp-usb: clean up device-tree parsing > phy: qcom-qmp-usb: clean up probe initialisation > phy: qcom-qmp-usb: rename PHY ops structure > phy: qcom-qmp-usb: clean up PHY init > dt-bindings: phy: qcom,qmp-usb: rename current bindings > dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding > phy: qcom-qmp-usb: restructure PHY creation > phy: qcom-qmp-usb: add support for updated sc8280xp binding > phy: qcom-qmp-pcie: sort device-id table > phy: qcom-qmp-pcie: move device-id table > phy: qcom-qmp-pcie: merge driver data > phy: qcom-qmp-pcie: clean up device-tree parsing > phy: qcom-qmp-pcie: clean up probe initialisation > phy: qcom-qmp-pcie: rename PHY ops structure > phy: qcom-qmp-pcie: clean up PHY lane init > phy: qcom-qmp-pcie: use shorter tables identifiers > phy: qcom-qmp-pcie: add register init helper > dt-bindings: phy: qcom,qmp-pcie: rename current bindings > dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings > phy: qcom-qmp-pcie: restructure PHY creation > phy: qcom-qmp-pcie: fix initialisation reset > phy: qcom-qmp-pcie: add support for pipediv2 clock > phy: qcom-qmp-pcie: add support for sc8280xp > phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs > phy: qcom-qmp-combo: fix out-of-bounds clock access > phy: qcom-qmp-combo: fix sdm845 reset > phy: qcom-qmp-combo: fix sc8180x reset > phy: qcom-qmp-combo: fix broken power on > phy: qcom-qmp-combo: fix runtime suspend > phy: qcom-qmp-combo: clean up common initialisation > phy: qcom-qmp-combo: sort device-id table > phy: qcom-qmp-combo: move device-id table > phy: qcom-qmp-combo: move pm ops > phy: qcom-qmp-combo: rename PHY ops structures > phy: qcom-qmp-combo: drop unused DP PHY mode op > phy: qcom-qmp-combo: rename USB PHY ops > phy: qcom-qmp-combo: drop unnecessary debug message > phy: qcom-qmp-combo: separate USB and DP init ops > phy: qcom-qmp-combo: rename DP PHY ops > phy: qcom-qmp-combo: separate USB and DP power-on ops > phy: qcom-qmp-combo: clean up serdes initialisation > phy: qcom-qmp-combo: separate USB and DP devicetree parsing > phy: qcom-qmp-combo: add dedicated DP iomem pointers > phy: qcom-qmp-combo: clean up DP configurations > phy: qcom-qmp-combo: rename sc8280xp config > phy: qcom-qmp-combo: add DP configuration tables > phy: qcom-qmp-combo: drop lanes config parameter > phy: qcom-qmp-combo: merge USB and DP configurations > phy: qcom-qmp-combo: merge driver data > phy: qcom-qmp-combo: clean up device-tree parsing > phy: qcom-qmp-combo: clean up probe initialisation > phy: qcom-qmp-combo: clean up DP callback names > dt-bindings: phy: qcom,qmp-usb3-dp: rename current bindings > dt-bindings: phy: qcom,qmp-usb3-dp: fix sc8280xp binding > phy: qcom-qmp-combo: drop v4 reference-clock source > phy: qcom-qmp-combo: restructure PHY creation > phy: qcom-qmp-combo: generate pipe clock name > phy: qcom-qmp-combo: drop redundant clock structure > phy: qcom-qmp-combo: drop redundant clock allocation > phy: qcom-qmp-combo: add clock registration helper > phy: qcom-qmp-combo: separate clock and provider registration > phy: qcom-qmp-combo: clean up DP clock callbacks > phy: qcom-qmp-combo: rename common-register pointers > phy: qcom-qmp-combo: rename DP_PHY register pointer > phy: qcom-qmp-combo: add support for updated sc8280xp binding > dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source > phy: qcom-qmp-usb: drop sc8280xp reference-clock source > phy: qcom-qmp: drop unused type header > phy: qcom-qmp-usb: drop redundant clock allocation > phy: qcom-qmp-pcie: drop redundant clock allocation Johan
Fixed Kishon email, On 19-12-22, 12:30, Johan Hovold wrote: > Hi Vinod, > > On Sun, Dec 18, 2022 at 07:57:04PM +0530, Vinod Koul wrote: > > > ---------------------------------------------------------------- > > phy-for-6.2 > > > > - New support: > > - Allwinner H616 USB PHY and A100 DPHY support > > - TI J721s2, J784s4 and J721e support > > - Freescale i.MX8MP PCIe PHY support > > - New driver for Renesas Ethernet SERDES supporting R-Car S4-8 > > - Qualcomm SM8450 PCIe1 PHY support in EP mode > > You could also have mentioned > > - Qualcomm SC8280XP PCIe PHY support (including x4 mode) > - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings Yes sorry to have missed that... I guess Linus might add this when merging the PR.. > > which were the primary reasons for reworking the QMP drivers and DT > bindings, something which also lead to a number of bugs in these drivers > being found and fixed. > > > - Updates: > > - again a big pile of updates on qcom-qmp-* drivers following the > > driver split and reorganization merged earlier > > - Phy order of API calls documentation update > > > > ---------------------------------------------------------------- > > > Johan Hovold (131): > > phy: qcom-qmp: fix obsolete lane comments > > phy: qcom-qmp-combo: drop unused UFS reset > > phy: qcom-qmp-pcie: drop unused common-block registers > > phy: qcom-qmp-pcie: clean up power-down handling > > phy: qcom-qmp-pcie: move power-down update > > phy: qcom-qmp-pcie-msm8996: clean up power-down handling > > phy: qcom-qmp-combo: clean up power-down handling > > phy: qcom-qmp-ufs: clean up power-down handling > > phy: qcom-qmp-usb: clean up power-down handling > > phy: qcom-qmp-pcie: clean up clock lists > > phy: qcom-qmp-pcie: drop bogus register update > > phy: qcom-qmp: drop regulator error message > > phy: qcom-qmp: drop superfluous comments > > phy: qcom-qmp-combo: drop unused in-layout configuration > > phy: qcom-qmp-pcie: drop redundant ipq8074 power on > > phy: qcom-qmp-pcie-msm8996: drop unused in-layout configuration > > phy: qcom-qmp-ufs: drop unused in-layout configuration > > phy: qcom-qmp-usb: drop unused in-layout configuration > > phy: qcom-qmp-pcie: drop power-down delay config > > phy: qcom-qmp-pcie: replace power-down delay > > phy: qcom-qmp-pcie-msm8996: drop power-down delay config > > phy: qcom-qmp-combo: drop sc8280xp power-down delay > > phy: qcom-qmp-combo: drop power-down delay config > > phy: qcom-qmp-usb: drop sc8280xp power-down delay > > phy: qcom-qmp-usb: drop power-down delay config > > phy: qcom-qmp-pcie: fix sc8180x initialisation > > phy: qcom-qmp-pcie: fix ipq8074-gen3 initialisation > > phy: qcom-qmp-pcie: fix ipq6018 initialisation > > phy: qcom-qmp-pcie: clean up status polling > > phy: qcom-qmp-pcie: increase status polling period > > phy: qcom-qmp-pcie-msm8996: clean up ready and status polling > > phy: qcom-qmp-pcie-msm8996: increase status polling period > > phy: qcom-qmp-combo: clean up status polling > > phy: qcom-qmp-combo: increase status polling period > > phy: qcom-qmp-ufs: drop unused phy-status config > > phy: qcom-qmp-ufs: clean up ready polling > > phy: qcom-qmp-ufs: increase ready polling period > > phy: qcom-qmp-usb: clean up status polling > > phy: qcom-qmp-usb: increase status polling period > > phy: qcom-qmp-combo: drop start and pwrdn-ctrl abstraction > > phy: qcom-qmp-pcie: drop start-ctrl abstraction > > phy: qcom-qmp-pcie: add config sanity checks > > phy: qcom-qmp-pcie-msm8996: drop start and pwrdn-ctrl abstraction > > phy: qcom-qmp-ufs: drop start and pwrdn-ctrl abstraction > > phy: qcom-qmp-usb: drop start and pwrdn-ctrl abstraction > > phy: qcom-qmp-combo: fix NULL-deref on runtime resume > > phy: qcom-qmp-ufs: move device-id table > > phy: qcom-qmp-ufs: merge driver data > > phy: qcom-qmp-ufs: clean up device-tree parsing > > phy: qcom-qmp-ufs: clean up probe initialisation > > phy: qcom-qmp-ufs: rename PHY ops structure > > phy: qcom-qmp-ufs: clean up PHY init > > dt-bindings: phy: qcom,qmp-ufs: rename current bindings > > dt-bindings: phy: qcom,qmp-ufs: fix sc8280xp binding > > phy: qcom-qmp-ufs: restructure PHY creation > > phy: qcom-qmp-ufs: add support for updated sc8280xp binding > > phy: qcom-qmp-usb: fix sc8280xp PCS_USB offset > > phy: qcom-qmp-usb: sort device-id table > > phy: qcom-qmp-usb: move device-id table > > phy: qcom-qmp-usb: move pm ops > > phy: qcom-qmp-usb: merge driver data > > phy: qcom-qmp-usb: clean up device-tree parsing > > phy: qcom-qmp-usb: clean up probe initialisation > > phy: qcom-qmp-usb: rename PHY ops structure > > phy: qcom-qmp-usb: clean up PHY init > > dt-bindings: phy: qcom,qmp-usb: rename current bindings > > dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding > > phy: qcom-qmp-usb: restructure PHY creation > > phy: qcom-qmp-usb: add support for updated sc8280xp binding > > phy: qcom-qmp-pcie: sort device-id table > > phy: qcom-qmp-pcie: move device-id table > > phy: qcom-qmp-pcie: merge driver data > > phy: qcom-qmp-pcie: clean up device-tree parsing > > phy: qcom-qmp-pcie: clean up probe initialisation > > phy: qcom-qmp-pcie: rename PHY ops structure > > phy: qcom-qmp-pcie: clean up PHY lane init > > phy: qcom-qmp-pcie: use shorter tables identifiers > > phy: qcom-qmp-pcie: add register init helper > > dt-bindings: phy: qcom,qmp-pcie: rename current bindings > > dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings > > phy: qcom-qmp-pcie: restructure PHY creation > > phy: qcom-qmp-pcie: fix initialisation reset > > phy: qcom-qmp-pcie: add support for pipediv2 clock > > phy: qcom-qmp-pcie: add support for sc8280xp > > phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs > > phy: qcom-qmp-combo: fix out-of-bounds clock access > > phy: qcom-qmp-combo: fix sdm845 reset > > phy: qcom-qmp-combo: fix sc8180x reset > > phy: qcom-qmp-combo: fix broken power on > > phy: qcom-qmp-combo: fix runtime suspend > > phy: qcom-qmp-combo: clean up common initialisation > > phy: qcom-qmp-combo: sort device-id table > > phy: qcom-qmp-combo: move device-id table > > phy: qcom-qmp-combo: move pm ops > > phy: qcom-qmp-combo: rename PHY ops structures > > phy: qcom-qmp-combo: drop unused DP PHY mode op > > phy: qcom-qmp-combo: rename USB PHY ops > > phy: qcom-qmp-combo: drop unnecessary debug message > > phy: qcom-qmp-combo: separate USB and DP init ops > > phy: qcom-qmp-combo: rename DP PHY ops > > phy: qcom-qmp-combo: separate USB and DP power-on ops > > phy: qcom-qmp-combo: clean up serdes initialisation > > phy: qcom-qmp-combo: separate USB and DP devicetree parsing > > phy: qcom-qmp-combo: add dedicated DP iomem pointers > > phy: qcom-qmp-combo: clean up DP configurations > > phy: qcom-qmp-combo: rename sc8280xp config > > phy: qcom-qmp-combo: add DP configuration tables > > phy: qcom-qmp-combo: drop lanes config parameter > > phy: qcom-qmp-combo: merge USB and DP configurations > > phy: qcom-qmp-combo: merge driver data > > phy: qcom-qmp-combo: clean up device-tree parsing > > phy: qcom-qmp-combo: clean up probe initialisation > > phy: qcom-qmp-combo: clean up DP callback names > > dt-bindings: phy: qcom,qmp-usb3-dp: rename current bindings > > dt-bindings: phy: qcom,qmp-usb3-dp: fix sc8280xp binding > > phy: qcom-qmp-combo: drop v4 reference-clock source > > phy: qcom-qmp-combo: restructure PHY creation > > phy: qcom-qmp-combo: generate pipe clock name > > phy: qcom-qmp-combo: drop redundant clock structure > > phy: qcom-qmp-combo: drop redundant clock allocation > > phy: qcom-qmp-combo: add clock registration helper > > phy: qcom-qmp-combo: separate clock and provider registration > > phy: qcom-qmp-combo: clean up DP clock callbacks > > phy: qcom-qmp-combo: rename common-register pointers > > phy: qcom-qmp-combo: rename DP_PHY register pointer > > phy: qcom-qmp-combo: add support for updated sc8280xp binding > > dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source > > phy: qcom-qmp-usb: drop sc8280xp reference-clock source > > phy: qcom-qmp: drop unused type header > > phy: qcom-qmp-usb: drop redundant clock allocation > > phy: qcom-qmp-pcie: drop redundant clock allocation > > Johan
The pull request you sent on Sun, 18 Dec 2022 19:57:04 +0530:
> git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git tags/phy-for-6.2
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/e79041113b19b8c7b8410d862d4a3630debded58
Thank you!
Hello Linus, Please pull to receive generic phy updatess. This tme we have again a big pile of qcom-qmp-* changes, one new driver and bunch of new hardware support. The following changes since commit 9abf2313adc1ca1b6180c508c25f22f9395cc780: Linux 6.1-rc1 (2022-10-16 15:36:24 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git tags/phy-for-6.2 for you to fetch changes up to bea3ce759b4664f20f1f57c53fe018c3b67da147: phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support (2022-11-24 23:41:41 +0530) ---------------------------------------------------------------- phy-for-6.2 - New support: - Allwinner H616 USB PHY and A100 DPHY support - TI J721s2, J784s4 and J721e support - Freescale i.MX8MP PCIe PHY support - New driver for Renesas Ethernet SERDES supporting R-Car S4-8 - Qualcomm SM8450 PCIe1 PHY support in EP mode - Updates: - again a big pile of updates on qcom-qmp-* drivers following the driver split and reorganization merged earlier - Phy order of API calls documentation update ---------------------------------------------------------------- Al Cooper (1): phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices Andre Przywara (3): dt-bindings: phy: Add special clock for Allwinner H616 PHY phy: sun4i-usb: Introduce port2 SIDDQ quirk phy: sun4i-usb: Add support for the H616 USB PHY Christian Marangi (1): phy: qcom-qmp-pcie: split pcs_misc init cfg for ipq8074 pcs table Dan Carpenter (2): phy: stm32: fix an error code in probe phy: stm32: fix an error code in probe Dmitry Baryshkov (6): phy: qcom-qmp-pcie: split register tables into common and extra parts phy: qcom-qmp-pcie: support separate tables for EP mode phy: qcom-qmp-pcie: Support SM8450 PCIe1 PHY in EP mode PCI: qcom: Setup PHY to work in RC mode PCI: qcom-ep: Setup PHY to work in EP mode phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY Florian Fainelli (1): phy: phy-brcm-usb: Utilize platform_get_irq_byname_optional() Johan Hovold (131): phy: qcom-qmp: fix obsolete lane comments phy: qcom-qmp-combo: drop unused UFS reset phy: qcom-qmp-pcie: drop unused common-block registers phy: qcom-qmp-pcie: clean up power-down handling phy: qcom-qmp-pcie: move power-down update phy: qcom-qmp-pcie-msm8996: clean up power-down handling phy: qcom-qmp-combo: clean up power-down handling phy: qcom-qmp-ufs: clean up power-down handling phy: qcom-qmp-usb: clean up power-down handling phy: qcom-qmp-pcie: clean up clock lists phy: qcom-qmp-pcie: drop bogus register update phy: qcom-qmp: drop regulator error message phy: qcom-qmp: drop superfluous comments phy: qcom-qmp-combo: drop unused in-layout configuration phy: qcom-qmp-pcie: drop redundant ipq8074 power on phy: qcom-qmp-pcie-msm8996: drop unused in-layout configuration phy: qcom-qmp-ufs: drop unused in-layout configuration phy: qcom-qmp-usb: drop unused in-layout configuration phy: qcom-qmp-pcie: drop power-down delay config phy: qcom-qmp-pcie: replace power-down delay phy: qcom-qmp-pcie-msm8996: drop power-down delay config phy: qcom-qmp-combo: drop sc8280xp power-down delay phy: qcom-qmp-combo: drop power-down delay config phy: qcom-qmp-usb: drop sc8280xp power-down delay phy: qcom-qmp-usb: drop power-down delay config phy: qcom-qmp-pcie: fix sc8180x initialisation phy: qcom-qmp-pcie: fix ipq8074-gen3 initialisation phy: qcom-qmp-pcie: fix ipq6018 initialisation phy: qcom-qmp-pcie: clean up status polling phy: qcom-qmp-pcie: increase status polling period phy: qcom-qmp-pcie-msm8996: clean up ready and status polling phy: qcom-qmp-pcie-msm8996: increase status polling period phy: qcom-qmp-combo: clean up status polling phy: qcom-qmp-combo: increase status polling period phy: qcom-qmp-ufs: drop unused phy-status config phy: qcom-qmp-ufs: clean up ready polling phy: qcom-qmp-ufs: increase ready polling period phy: qcom-qmp-usb: clean up status polling phy: qcom-qmp-usb: increase status polling period phy: qcom-qmp-combo: drop start and pwrdn-ctrl abstraction phy: qcom-qmp-pcie: drop start-ctrl abstraction phy: qcom-qmp-pcie: add config sanity checks phy: qcom-qmp-pcie-msm8996: drop start and pwrdn-ctrl abstraction phy: qcom-qmp-ufs: drop start and pwrdn-ctrl abstraction phy: qcom-qmp-usb: drop start and pwrdn-ctrl abstraction phy: qcom-qmp-combo: fix NULL-deref on runtime resume phy: qcom-qmp-ufs: move device-id table phy: qcom-qmp-ufs: merge driver data phy: qcom-qmp-ufs: clean up device-tree parsing phy: qcom-qmp-ufs: clean up probe initialisation phy: qcom-qmp-ufs: rename PHY ops structure phy: qcom-qmp-ufs: clean up PHY init dt-bindings: phy: qcom,qmp-ufs: rename current bindings dt-bindings: phy: qcom,qmp-ufs: fix sc8280xp binding phy: qcom-qmp-ufs: restructure PHY creation phy: qcom-qmp-ufs: add support for updated sc8280xp binding phy: qcom-qmp-usb: fix sc8280xp PCS_USB offset phy: qcom-qmp-usb: sort device-id table phy: qcom-qmp-usb: move device-id table phy: qcom-qmp-usb: move pm ops phy: qcom-qmp-usb: merge driver data phy: qcom-qmp-usb: clean up device-tree parsing phy: qcom-qmp-usb: clean up probe initialisation phy: qcom-qmp-usb: rename PHY ops structure phy: qcom-qmp-usb: clean up PHY init dt-bindings: phy: qcom,qmp-usb: rename current bindings dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding phy: qcom-qmp-usb: restructure PHY creation phy: qcom-qmp-usb: add support for updated sc8280xp binding phy: qcom-qmp-pcie: sort device-id table phy: qcom-qmp-pcie: move device-id table phy: qcom-qmp-pcie: merge driver data phy: qcom-qmp-pcie: clean up device-tree parsing phy: qcom-qmp-pcie: clean up probe initialisation phy: qcom-qmp-pcie: rename PHY ops structure phy: qcom-qmp-pcie: clean up PHY lane init phy: qcom-qmp-pcie: use shorter tables identifiers phy: qcom-qmp-pcie: add register init helper dt-bindings: phy: qcom,qmp-pcie: rename current bindings dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings phy: qcom-qmp-pcie: restructure PHY creation phy: qcom-qmp-pcie: fix initialisation reset phy: qcom-qmp-pcie: add support for pipediv2 clock phy: qcom-qmp-pcie: add support for sc8280xp phy: qcom-qmp-pcie: add support for sc8280xp 4-lane PHYs phy: qcom-qmp-combo: fix out-of-bounds clock access phy: qcom-qmp-combo: fix sdm845 reset phy: qcom-qmp-combo: fix sc8180x reset phy: qcom-qmp-combo: fix broken power on phy: qcom-qmp-combo: fix runtime suspend phy: qcom-qmp-combo: clean up common initialisation phy: qcom-qmp-combo: sort device-id table phy: qcom-qmp-combo: move device-id table phy: qcom-qmp-combo: move pm ops phy: qcom-qmp-combo: rename PHY ops structures phy: qcom-qmp-combo: drop unused DP PHY mode op phy: qcom-qmp-combo: rename USB PHY ops phy: qcom-qmp-combo: drop unnecessary debug message phy: qcom-qmp-combo: separate USB and DP init ops phy: qcom-qmp-combo: rename DP PHY ops phy: qcom-qmp-combo: separate USB and DP power-on ops phy: qcom-qmp-combo: clean up serdes initialisation phy: qcom-qmp-combo: separate USB and DP devicetree parsing phy: qcom-qmp-combo: add dedicated DP iomem pointers phy: qcom-qmp-combo: clean up DP configurations phy: qcom-qmp-combo: rename sc8280xp config phy: qcom-qmp-combo: add DP configuration tables phy: qcom-qmp-combo: drop lanes config parameter phy: qcom-qmp-combo: merge USB and DP configurations phy: qcom-qmp-combo: merge driver data phy: qcom-qmp-combo: clean up device-tree parsing phy: qcom-qmp-combo: clean up probe initialisation phy: qcom-qmp-combo: clean up DP callback names dt-bindings: phy: qcom,qmp-usb3-dp: rename current bindings dt-bindings: phy: qcom,qmp-usb3-dp: fix sc8280xp binding phy: qcom-qmp-combo: drop v4 reference-clock source phy: qcom-qmp-combo: restructure PHY creation phy: qcom-qmp-combo: generate pipe clock name phy: qcom-qmp-combo: drop redundant clock structure phy: qcom-qmp-combo: drop redundant clock allocation phy: qcom-qmp-combo: add clock registration helper phy: qcom-qmp-combo: separate clock and provider registration phy: qcom-qmp-combo: clean up DP clock callbacks phy: qcom-qmp-combo: rename common-register pointers phy: qcom-qmp-combo: rename DP_PHY register pointer phy: qcom-qmp-combo: add support for updated sc8280xp binding dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source phy: qcom-qmp-usb: drop sc8280xp reference-clock source phy: qcom-qmp: drop unused type header phy: qcom-qmp-usb: drop redundant clock allocation phy: qcom-qmp-pcie: drop redundant clock allocation Jon Hunter (1): phy: tegra: xusb: Fix crash during pad power on/down Justin Chen (5): phy: usb: Improve port mode selection phy: usb: Migrate to BIT and BITMASK macros phy: usb: Disable phy auto-suspend phy: usb: Use slow clock for wake enabled suspend phy: usb: Fix clock imbalance for suspend/resume Kishon Vijay Abraham I (1): MAINTAINERS: Update Kishon's email address in GENERIC PHY FRAMEWORK Manivannan Sadhasivam (2): phy: qcom-qmp-pcie: Fix high latency with 4x2 PHY when ASPM is enabled phy: qcom-qmp-pcie: Fix sm8450_qmp_gen4x2_pcie_pcs_tbl[] register names Matt Ranostay (4): dt-bindings: phy-j721e-wiz: add j784s4 compatible string phy: ti: phy-j721e-wiz: add j784s4-wiz-10g module support dt-bindings: phy-j721e-wiz: add j721s2 compatible string phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support Minghao Chi (1): phy: use devm_platform_get_and_ioremap_resource() Pali Rohár (1): phy: marvell: phy-mvebu-a3700-comphy: Reset COMPHY registers before USB 3.0 power on Richard Zhu (4): dt-binding: phy: Add i.MX8MP PCIe PHY binding phy: freescale: imx8m-pcie: Refine register definitions phy: freescale: imx8m-pcie: Refine i.MX8MM PCIe PHY driver phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support Samuel Holland (6): dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant Sean Anderson (1): doc: phy: Document typical order of API calls Siddharth Vadapalli (3): dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J721e phy: ti: gmii-sel: Update methods for fetching and using qsgmii main port phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J721e Vidya Sagar (1): phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration Vinod Koul (1): Merge branch 'fixes' into next Wayne Chang (1): phy: tegra: xusb: Remove usb3 supply Yoshihiro Shimoda (2): dt-bindings: phy: renesas: Document Renesas Ethernet SERDES phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8 .../phy/allwinner,sun6i-a31-mipi-dphy.yaml | 11 + .../bindings/phy/allwinner,sun8i-h3-usb-phy.yaml | 26 + .../devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml | 16 +- ...cie-phy.yaml => qcom,ipq8074-qmp-pcie-phy.yaml} | 7 +- ...-ufs-phy.yaml => qcom,msm8996-qmp-ufs-phy.yaml} | 17 +- ...usb-phy.yaml => qcom,msm8996-qmp-usb3-phy.yaml} | 20 +- ...p-phy.yaml => qcom,sc7180-qmp-usb3-dp-phy.yaml} | 25 +- .../bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 165 ++ .../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 83 + .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 102 ++ .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml | 99 ++ .../phy/renesas,r8a779f0-ether-serdes.yaml | 54 + .../devicetree/bindings/phy/ti,phy-gmii-sel.yaml | 48 +- .../devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 2 + Documentation/driver-api/phy/phy.rst | 25 +- MAINTAINERS | 2 +- drivers/pci/controller/dwc/pcie-qcom-ep.c | 5 + drivers/pci/controller/dwc/pcie-qcom.c | 5 + drivers/phy/allwinner/phy-sun4i-usb.c | 71 + drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 236 ++- drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 95 +- drivers/phy/broadcom/phy-brcm-usb-init.c | 90 +- drivers/phy/broadcom/phy-brcm-usb-init.h | 11 +- drivers/phy/broadcom/phy-brcm-usb.c | 32 +- drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 142 +- drivers/phy/marvell/phy-mmp3-hsic.c | 4 +- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 3 + drivers/phy/qualcomm/Kconfig | 1 + drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 1709 +++++++++----------- drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 103 +- drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 1443 ++++++++++------- drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h | 2 + drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h | 2 + drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5_20.h | 14 + drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 482 +++--- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 737 ++++----- drivers/phy/qualcomm/phy-qcom-qmp.h | 1 + drivers/phy/renesas/Kconfig | 8 + drivers/phy/renesas/Makefile | 1 + drivers/phy/renesas/r8a779f0-ether-serdes.c | 417 +++++ drivers/phy/st/phy-stm32-usbphyc.c | 2 + drivers/phy/tegra/phy-tegra194-p2u.c | 14 + drivers/phy/tegra/xusb-tegra124.c | 1 - drivers/phy/tegra/xusb-tegra186.c | 1 - drivers/phy/tegra/xusb-tegra210.c | 1 - drivers/phy/tegra/xusb.c | 30 +- drivers/phy/tegra/xusb.h | 2 - drivers/phy/ti/phy-gmii-sel.c | 42 +- drivers/phy/ti/phy-j721e-wiz.c | 38 + include/dt-bindings/phy/phy-qcom-qmp.h | 20 + 50 files changed, 3933 insertions(+), 2534 deletions(-) rename Documentation/devicetree/bindings/phy/{qcom,qmp-pcie-phy.yaml => qcom,ipq8074-qmp-pcie-phy.yaml} (96%) rename Documentation/devicetree/bindings/phy/{qcom,qmp-ufs-phy.yaml => qcom,msm8996-qmp-ufs-phy.yaml} (93%) rename Documentation/devicetree/bindings/phy/{qcom,qmp-usb-phy.yaml => qcom,msm8996-qmp-usb3-phy.yaml} (95%) rename Documentation/devicetree/bindings/phy/{qcom,qmp-usb3-dp-phy.yaml => qcom,sc7180-qmp-usb3-dp-phy.yaml} (91%) create mode 100644 Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/renesas,r8a779f0-ether-serdes.yaml create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5_20.h create mode 100644 drivers/phy/renesas/r8a779f0-ether-serdes.c create mode 100644 include/dt-bindings/phy/phy-qcom-qmp.h