| Message ID | 20200708071942.22595-1-frank@allwinnertech.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Allwinner A100 Initial support | expand |
On Wed, Jul 08, 2020 at 03:19:26PM +0800, Frank Lee wrote: > This patch set adds initial support for allwinner a100 soc, > which is a 64-bit tablet chip. > Hello Does a product already exists with it ? I couldnt found any. Does a datasheet is availlable ? Regards
Hi, On Wed, Jul 08, 2020 at 03:19:26PM +0800, Frank Lee wrote: > This patch set adds initial support for allwinner a100 soc, > which is a 64-bit tablet chip. > > v3: > -Add pmu and nmi support > -Add read data mask for calibration > -Code style > -Some trivial things in yaml files > > v2: > -Some naming consistency > -Repair email address > -Fix mmc clock > -Don't export system clock > -Fix checkpatch warning > -Drop unneeded pin function, convert to jtag_gpu and i2s_x > > Frank Lee (16): > dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and > R-CCU > clk: sunxi-ng: add support for the Allwinner A100 CCU > dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings > dt-bindings: pinctrl: sunxi: make gpio banks supplies required > pinctrl: sunxi: add support for the Allwinner A100 pin controller > dt-bindings: nvmem: SID: add binding for A100's SID controller > dt-bindings: thermal: sun8i: Add binding for A100's THS controller > thermal: sun8i: add TEMP_CALIB_MASK for calibration data in > sun50i_h6_ths_calibrate > thermal: sun8i: Add A100's THS controller support > mfd: axp20x: Allow the AXP803 to be probed by I2C > dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi > dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller it doesn't look like those patches went through? > dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node. > arm64: allwinner: A100: add the basical Allwinner A100 DTSI file > dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings > arm64: allwinner: A100: add support for Allwinner Perf1 board On a more general topic, which bootloader have you used to test this? The one from Allwinner's BSP I assume? Maxime
HI, >> dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi >> dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller > >it doesn't look like those patches went through? Due to sending too many emails at once, it seems that some emails have been filtered by the mailbox, and I just reissued them. > >> dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node. >> arm64: allwinner: A100: add the basical Allwinner A100 DTSI file >> dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings >> arm64: allwinner: A100: add support for Allwinner Perf1 board > >On a more general topic, which bootloader have you used to test this? >The one from Allwinner's BSP I assume? Yeah, there is no bringup on the mainline BootLoader yet. If nothing happens, the next edition will be released today. We hope that A100 will be integrated as soon as possible. MBR, Yangtao
> On Wed, Jul 08, 2020 at 03:19:26PM +0800, Frank Lee wrote: >> This patch set adds initial support for allwinner a100 soc, >> which is a 64-bit tablet chip. > > > > Hello > > Does a product already exists with it ? I couldnt found any. > Does a datasheet is availlable ? > The product is still in development, A133 is actually a high performance version of A100. Yangtao
This patch set adds initial support for allwinner a100 soc, which is a 64-bit tablet chip. v3: -Add pmu and nmi support -Add read data mask for calibration -Code style -Some trivial things in yaml files v2: -Some naming consistency -Repair email address -Fix mmc clock -Don't export system clock -Fix checkpatch warning -Drop unneeded pin function, convert to jtag_gpu and i2s_x Frank Lee (16): dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU clk: sunxi-ng: add support for the Allwinner A100 CCU dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings dt-bindings: pinctrl: sunxi: make gpio banks supplies required pinctrl: sunxi: add support for the Allwinner A100 pin controller dt-bindings: nvmem: SID: add binding for A100's SID controller dt-bindings: thermal: sun8i: Add binding for A100's THS controller thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate thermal: sun8i: Add A100's THS controller support mfd: axp20x: Allow the AXP803 to be probed by I2C dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node. arm64: allwinner: A100: add the basical Allwinner A100 DTSI file dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings arm64: allwinner: A100: add support for Allwinner Perf1 board Documentation/devicetree/bindings/arm/sunxi.yaml | 5 + .../bindings/clock/allwinner,sun4i-a10-ccu.yaml | 7 +- .../bindings/i2c/marvell,mv64xxx-i2c.yaml | 3 + .../allwinner,sun7i-a20-sc-nmi.yaml | 5 +- .../bindings/nvmem/allwinner,sun4i-a10-sid.yaml | 3 + .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 75 +- .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 6 +- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../dts/allwinner/sun50i-a100-allwinner-perf1.dts | 180 +++ arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 364 ++++++ drivers/clk/sunxi-ng/Kconfig | 10 + drivers/clk/sunxi-ng/Makefile | 2 + drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c | 214 ++++ drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h | 21 + drivers/clk/sunxi-ng/ccu-sun50i-a100.c | 1276 ++++++++++++++++++++ drivers/clk/sunxi-ng/ccu-sun50i-a100.h | 56 + drivers/mfd/axp20x-i2c.c | 2 + drivers/pinctrl/sunxi/Kconfig | 10 + drivers/pinctrl/sunxi/Makefile | 2 + drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c | 105 ++ drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c | 708 +++++++++++ drivers/thermal/sun8i_thermal.c | 16 +- include/dt-bindings/clock/sun50i-a100-ccu.h | 116 ++ include/dt-bindings/clock/sun50i-a100-r-ccu.h | 23 + include/dt-bindings/reset/sun50i-a100-ccu.h | 68 ++ include/dt-bindings/reset/sun50i-a100-r-ccu.h | 18 + 26 files changed, 3262 insertions(+), 34 deletions(-) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.c create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.h create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c create mode 100644 include/dt-bindings/clock/sun50i-a100-ccu.h create mode 100644 include/dt-bindings/clock/sun50i-a100-r-ccu.h create mode 100644 include/dt-bindings/reset/sun50i-a100-ccu.h create mode 100644 include/dt-bindings/reset/sun50i-a100-r-ccu.h