mbox series

[v6,00/12] Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7

Message ID 20210731173842.19643-1-digetx@gmail.com (mailing list archive)
Headers show
Series Add OTG mode support to Tegra USB PHY, SMB347 and Nexus 7 | expand

Message

Dmitry Osipenko July 31, 2021, 5:38 p.m. UTC
Hi,

This series adds USB OTG mode support to the NVIDIA Tegra USB PHY driver,
SMB347 charger driver and Nexus 7 tablet.

Changelog:

v6: - Added r-b from Rob Herring to the OTG properties DT binding patch.

    - Corrected "smb347-charger: generic regmap caching" patch, it now
      sets the .num_reg_defaults_raw, initializing cache properly.

    - Added new patch "smb347-charger: Add missing pin control activation",
      which prevents never-enabled charging on Nexus 7.

    - The "otg-fsm: Fix hrtimer list corruption" patch of v5 was already
      applied to next, so it's not included anymore.

v5: - Replaced "Remove caching of charger state" patch with "Utilize
      generic regmap caching" after Sebastian's notice about disabled
      regmap caching.

v4: - Added r-b from Rob Herring.

    - Added unevaluatedProperties into SMB binding for VBUS regulator,
      which was Requested by Rob Herring.

    - Added cell to nvidia,pmc phandle instead of explicit h/w ID
      property. Requested by Rob Herring.

    - Added stack trace to commit message and ack from Peter Chen to
      OTG FSM patch.

v3: - Further improved interrupt handling in the PHY driver by removing
      assumption that interrupt is enabled by the CI driver at the time
      of set_wakeup() invocation, which makes this function a bit more
      universal.

v2: - The PHY's interrupt is now enabled from PHY's set_wakeup() callback.
      It prevents getting a spurious interrupt during the CI driver probe
      time.

Dmitry Osipenko (12):
  dt-bindings: phy: tegra20-usb-phy: Convert to schema
  dt-bindings: phy: tegra20-usb-phy: Document properties needed for OTG
    mode
  soc/tegra: pmc: Expose USB regmap to all SoCs
  usb: phy: tegra: Support OTG mode programming
  dt-bindings: power: supply: smb347-charger: Document USB VBUS
    regulator
  power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe
  power: supply: smb347-charger: Utilize generic regmap caching
  power: supply: smb347-charger: Add missing pin control activation
  power: supply: smb347-charger: Implement USB VBUS regulator
  ARM: tegra: Add new properties to USB PHY device-tree nodes
  ARM: tegra: nexus7: Enable USB OTG mode
  arm64: tegra132: Add new properties to USB PHY device-tree node

 .../bindings/phy/nvidia,tegra20-usb-phy.txt   |  74 ----
 .../bindings/phy/nvidia,tegra20-usb-phy.yaml  | 373 ++++++++++++++++++
 .../power/supply/summit,smb347-charger.yaml   |  30 ++
 arch/arm/boot/dts/tegra114.dtsi               |   4 +
 arch/arm/boot/dts/tegra124.dtsi               |   6 +
 arch/arm/boot/dts/tegra20.dtsi                |   6 +
 .../tegra30-asus-nexus7-grouper-common.dtsi   |  25 +-
 arch/arm/boot/dts/tegra30.dtsi                |   6 +
 arch/arm64/boot/dts/nvidia/tegra132.dtsi      |   6 +
 drivers/power/supply/Kconfig                  |   1 +
 drivers/power/supply/smb347-charger.c         | 271 ++++++++++++-
 drivers/soc/tegra/pmc.c                       |   6 +-
 drivers/usb/phy/phy-tegra-usb.c               | 197 ++++++++-
 .../dt-bindings/power/summit,smb347-charger.h |   4 +
 include/linux/usb/tegra_usb_phy.h             |   5 +
 15 files changed, 911 insertions(+), 103 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml