mbox series

[v6,0/7] Add LVTS architecture thermal

Message ID 20220512122433.1399802-1-abailon@baylibre.com (mailing list archive)
Headers show
Series Add LVTS architecture thermal | expand


Alexandre Bailon May 12, 2022, 12:24 p.m. UTC
This patch move thermal files related to Mediatek to the mediatek folder.
And introduce the new architecture LVTS (low pressure thermal sensor) driver to report
the highest temperature in the SoC and record the highest temperature sensor,
each sensor as a hot zone.
The LVTS body is divided into two parts, the LVTS controller and the LVTS device.
The LVTS controller can connect up to 4 LVTS devices, and each LVTS device
can connect up to 7 TSMCUs.

The architecture will be the first to be used on mt6873 and mt8192.

Change in v6:
        - Remove temperature aggregation (it will be added in another series)
        - Update the way to read the temperature (read one sensor instead of all)
        - Add support of mt8195
Change in v5:
        - Use 'git mv' for the relocated file.

Change in v4:
        - Rebase to kernel-v5.13-rc1
        - Resend

Change in v3:
        - [2/3]
          - change the expression in the lvts_temp_to_raw to dev_s64.

Change in v2:
        - Rebase to kernel-5.11-rc1.
        - [2/3]
          - sort headers
          - remove initial value 0 of msr_raw in the lvts_temp_to_raw.
          - disconstruct the api of lvts_read_tc_msr_raw.
          - add the initial value max_temp = 0 and compare e.q.
            in the lvts_read_all_tc_temperature.
          - add the return with invalid number in the lvts_init.

This patch depends on [1].


Alexandre Bailon (2):
  dt-bindings: thermal: Add binding document for mt8195 thermal
  arm64: dts: mediatek: Add efuse node to mt8195

Michael Kao (4):
  thermal: mediatek: Relocate driver to mediatek folder
  dt-bindings: thermal: Add binding document for mt6873 thermal
  thermal: mediatek: Add LVTS drivers for SoC theraml zones
  thermal: mediatek: Add thermal zone settings for mt8195

Tinghan Shen (1):
  arm64: dts: mt8195: Add thermal zone

 .../thermal/mediatek-thermal-lvts.yaml        |   85 +
 arch/arm64/boot/dts/mediatek/mt8195.dtsi      |  121 ++
 drivers/thermal/Kconfig                       |   14 +-
 drivers/thermal/Makefile                      |    2 +-
 drivers/thermal/mediatek/Kconfig              |   33 +
 drivers/thermal/mediatek/Makefile             |    2 +
 .../{mtk_thermal.c => mediatek/soc_temp.c}    |    2 +-
 drivers/thermal/mediatek/soc_temp_lvts.c      | 1458 +++++++++++++++++
 drivers/thermal/mediatek/soc_temp_lvts.h      |  312 ++++
 9 files changed, 2017 insertions(+), 12 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
 create mode 100644 drivers/thermal/mediatek/Kconfig
 create mode 100644 drivers/thermal/mediatek/Makefile
 rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (99%)
 create mode 100644 drivers/thermal/mediatek/soc_temp_lvts.c
 create mode 100644 drivers/thermal/mediatek/soc_temp_lvts.h


Lothar Waßmann May 12, 2022, 12:33 p.m. UTC | #1

On Thu, 12 May 2022 14:24:26 +0200 Alexandre Bailon wrote:
> And introduce the new architecture LVTS (low pressure thermal sensor) driver to report
                                      ^        ^
"low voltage"?

Lothar Waßmann