| Message ID | 20230407194905.611461-1-bryan.odonoghue@linaro.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add MSM8939 SoC support with two devices | expand |
On 07/04/2023 20:49, Bryan O'Donoghue wrote: > V9: > - Fixes name of tsens > s4 is not present > s4->s5 > s5->s6 > s6->s7 > s7->s8 > s8->s9 > I erroneously thought the last sensor needed to be brought in but, > as has been pointed out to me, the last sensor isn't used, so > no need to support the reading and reassembly of the non-contiguous > calibration data - Stephan/Dmitry > > - pronto/s//wcnss - Stephan > > - tulip dr_mode = "otg" not dr_mode = "device" > I set the value to device for debug purposes but the role-switch > works just fine and should be upstream - Stephan > > - fixed alphabetisation in pm8939-8916.dtsi - bod > > Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-04-07-msm8939-nocpr > Previous: https://lore.kernel.org/linux-arm-msm/20230330153222.2875121-1-bryan.odonoghue@linaro.org/ > > git diff linux-next-23-03-27-msm8939-nocpr -- arch/arm64/boot/dts/qcom/*39* > > V8: > - Addresses all of Stephan's comments from v7 > - Moves M4 Aqua display to a separate series > - Retains s4_p1/p2 done on purpose I believe > - Adds Konrad's RB as indicated > > Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-03-27-msm8939-nocpr > Previous: https://lore.kernel.org/lkml/20230223153655.262783-1-bryan.odonoghue@linaro.org/ > > V7: > - Addresses all of Konrad's asks on V6 > - Adds Konrad's RB for patch #3 > Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-23-msm8939-nocpr > Previous: https://lore.kernel.org/lkml/20230222120411.55197-2-bryan.odonoghue@linaro.org/T/ > > V6: > - Adds Krzysztof's Ack for Square vendor addition - Krzysztof > - Incorporates all of Stephan's comments from V5, including > dropping CPR dummy given the dependent patch [1] has been merged, now. > > Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-21-msm8939-nocpr > Previous: https://lore.kernel.org/lkml/20230206012336.2130341-1-bryan.odonoghue@linaro.org/T/ > [1]: https://lore.kernel.org/linux-arm-msm/20230208153913.24436-2-ansuelsmth@gmail.com/ > > V5: > - Adds Square as a vendor - Krzysztof > > - typec_pd: usb-pd@38 - Krzysztof > > - Drops gcc clock controller extension. It looks like phy0 actually > provides a PLL to phy1 for its byte clock. - Bryan, Krzysztof, Stephan > > - Adds RB Konrad as indicated - Konrad > > - wcnss VDDMX_AO -> VDDMX - Bjorn > > - Adds dsi_phy0 as clock-parent to dsi1 > > - mdss interconnect drops Androidism "register-mem" - Stephan > > - cpu power-domain. I've retained the "dummy" cpr reference to > satiate dtbs_check [1] but renamed &vreg_cpr_stub to remove any confusion > between now and when we finish off CPR on 8939. > > Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-02-msm8939-nocpr > Previous: https://lore.kernel.org/linux-arm-msm/20230123023127.1186619-1-bryan.odonoghue@linaro.org/ > [1] https://lore.kernel.org/linux-arm-msm/20230126150026.14590-1-ansuelsmth@gmail.com/ > > V4: > - Adds Krzysztof's RB to snoc-mm > - Re-orders alphabetically missed nodes in previous iteration - Bjorn > - Adds LK address/size cells comment - Bjorn > > - Left _AO for wcnss as downstream reference uses this - Bjorn/Bryan > - Uses qcom,ids.h and QCOM_ID_SOCNAME for qcom,msm-id - Bjorn > - Revises comment from "Regulator" to "Power supply" - Bjorn > - Leaves dummy power-domain reference in cpu defintion as this > > - Relabels "cpu" to "CPU" to be more consistent with other dtsi - Bryan > - Moves msm8939 gcc to its own yaml file to capture 8939 specific form - Bryan > > is a required property and the dt checker complains - Stephan/Bryan > - Removes CPR entries from qfprom - Stephan > - Left MDSS interconnects. I don't see a bug to fix here - Stephan/Bryan > - power-domain in MDSS - dropped its not longer required after > commit a6f033938beb ("dt-bindings: msm: dsi-controller-main: Fix power-domain constraint") - Stephan > - Adds gcc dsi1pll and dsi1pllbyte to gcc clock list. > Reviewing the silicon documentation we see dsi0_phy_pll is used to clock > GCC_BYTE1_CFG_RCGR : SRC_SEL > Root Source Select > 000 : cxo > 001 : dsi0_phy_pll_out_byteclk > 010 : GPLL0_OUT_AUX > 011 : gnd > 100 : gnd > 101 : gnd > 110 : gnd > 111 : reserved - Stephan/Bryan > > - pm8916_l16 -> pm8916_l6 in dsi definition, typo - Konrad > - Moved regulator_set_load location - Konrad > > Previous: https://lore.kernel.org/lkml/20230118050948.bibhq26s6sgzullg@builder.lan/T/ > Bootable: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-23-msm8939-nocpr > > V3: > - Happily I don't currently depend on any other series to be merged. > Bjorn and Chanwoo picked up everything I need to unblock this series. ＼(^o^)／ > > - Moves xo_board to RPM/PMIC clock gated CXO, not including rpmcc: obvs - Konrad/Bjorn > - qcom,msm-id = <239 0> - left as in V2 valid according to Sony references - bod > - cpu-release-addr - as stated below we rely on lk2nd to take the second cluster > out of reset - bod > - smem child node update - Konrad > - Whitespace updates - Konrad > - gpu no interconnect - Konrad - No bod > - 19.2 MHz dropped from timer@b020000 - Konrad > - Added vreg_dummy comment - Konrad > - sdc_pins grouped - Konrad > - startup-delay-us = <0> - left as is > - bias - added no-bias - Konrad > - :g/msmgpio/s//tlmm/g - Konrad > - mdss/s//display-controller - Konrad > - l11 set-load - Korad > > - l12 upper voltage raised to 3.3v since this is what the > downstream kernel says when I boot and interrogate it - bod > > - sdhc@address - Discussed with Krzysztof and implemented as discussed > - snoc-mm fix - Discussed with Krzysztof implemented if:then:else:not > - dtc -I dtb -fs apq8039-t2.dtb prodcues > /soc@0/i2c@78b5000: duplicate unit-address > as does every other component that uses this polymorphic dts node > - Renamed type-c i2c port manager IC to "typec" - Krzysztof > > /smsm/hexagon@1: Missing #address-cells in interrupt provider > Same output as other upstream and recently upstreamed SoCs > I left these alone for now > > link: https://lore.kernel.org/lkml/20230103010904.3201835-1-bryan.odonoghue@linaro.org/T/ > bootable: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-16-msm8939-nocpr > > V2: > - Sorts core dtsi node list by address followed by alpahbetical sorting > within address sorted nodes - Bjorn > - Drops use of 8916-pins - Bjorn > - Adds msm8939-pm8916.dtsi - Stephan > - Fixes every dts splat from previous submission minus non-converted > .txt compat strings [1] and one yaml error in Bjorn's tree not in -next yet > - I haven't applied Dmitry's change for tsens since that's not been > picked up yet > - Picks up a number of suggestions and fixes from Stephan Gerhold and Vincent Knecht > > - Depends on > > Applied: > [PATCH v4 0/7] remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953 > https://lore.kernel.org/linux-arm-msm/167216232800.738877.17567287056128563074.b4-ty@kernel.org/ > > [PATCH v6 0/5] remoteproc: qcom: Add support for pronto-v3 > https://lore.kernel.org/linux-arm-msm/167216232801.738877.15895916910585144737.b4-ty@kernel.org/ > > [PATCH v6 00/18] mdss-dsi-ctrl binding and dts fixes > https://lore.kernel.org/linux-arm-msm/167233461766.1099840.17628700245792986354.b4-ty@kernel.org/ > > Awaiting application: > https://lore.kernel.org/linux-arm-msm/20221228133058.213886-1-bryan.odonoghue@linaro.org/ > > - Previous > https://lore.kernel.org/linux-arm-msm/20220419010903.3109514-1-bryan.odonoghue@linaro.org/ > > - Bootable tree > https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-03-msm8939-no-cpr > > - [1] DTC_CHK arch/arm64/boot/dts/qcom/apq8039-t2.dtb > > Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt > qcom/apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible:0: 'qcom,idle-state-spc' is not one of ['arm,idle-state', 'riscv,idle-state'] > From schema: Documentation/devicetree/bindings/cpu/idle-states.yaml > qcom/apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible: ['qcom,idle-state-spc', 'arm,idle-state'] is too long > From schema: Documentation/devicetree/bindings/cpu/idle-states.yaml > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /cpus/idle-states/cpu-sleep-0: failed to match any schema with compatible: ['qcom,idle-state-spc', 'arm,idle-state'] > > Documentation/devicetree/bindings/iommu/qcom,iommu.txt > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000: failed to match any schema with compatible: ['qcom,msm8916-iommu', 'qcom,msm-iommu-v1'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000/iommu-ctx@4000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000/iommu-ctx@5000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-sec'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000: failed to match any schema with compatible: ['qcom,msm8916-iommu', 'qcom,msm-iommu-v1'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000/iommu-ctx@1000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000/iommu-ctx@2000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] > > arch/arm64/boot/dts/qcom/pm8916.dtsi f5d7bca55425c8 > qcom/apq8039-t2.dtb: pmic@0: 'extcon@1300' does not match any of the regexes: '(.*)?(wled|leds)@[0-9a-f]+$', '^adc-tm@[0-9a-f]+$', '^adc@[0-9a-f]+$', '^audio-codec@[0-9a-f]+$', '^charger@[0-9a-f]+$', '^mpps@[0-9a-f]+$', '^rtc@[0-9a-f]+$', '^temp-alarm@[0-9a-f]+$', '^usb-detect@[0-9a-f]+$', '^usb-vbus-regulator@[0-9a-f]+$', '^vibrator@[0-9a-f]+$', 'gpio@[0-9a-f]+$', 'pinctrl-[0-9]+', 'pon@[0-9a-f]+$' > From schema: Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml > > Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/spmi@200f000/pmic@1/audio-codec@f000: failed to match any schema with compatible: ['qcom,pm8916-wcd-analog-codec'] > > yaml documentation error not yet in -next > arm64/boot/dts/qcom/apq8039-t2.dtb: remoteproc@4080000: qcom,halt-regs:0: [33] is too short > From schema: Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml > > Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/usb@78d9000: failed to match any schema with compatible: ['qcom,ci-hdrc'] > > Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt: compatible = "qcom,kpss-acc-v2"; > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b088000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b098000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b0a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b0b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b188000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b198000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b1a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] > arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b1b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] > > V1: > This series adds in MSM8939 SoC support with two supported devices. > > - CPU > MSM8939 is a non-PSCI compliant device. As such in the downstreaming > shipped image custom code is used to bring non-boot cores out of reset. > > This drop specifies the boot-method as spin-table instead and is > completely standard. To accomplish this, we rely on lk2nd. > > https://github.com/msm8916-mainline/lk2nd/pull/142 > > - Serial > - i2c > - USB > - eMMC > - MDP/DSI > - WiFi > - Bluetooth > > What's not included > > - CPR > We have CPR working in a 4.19 kernel quite well but for now it feels like > putting the cart before the horse to gate the SoC and boards on CPR. > > - Venus > I've been told this works but I haven't tried it myself and right now > consider it maybe working but probably not 100%. > > - Sound > We have a copy-exactly from the 4.19 kernel here in the DTS. > I haven't run the sound through any sort of reasonable test. > Vincent Knecht has some PostmarketOS kernels which use a 5.17 version of > this DTS to get sound up so, I think sound is in good shape. > > - CAMSS > There are slight differences between msm8916 and msm8939 for CAMSS. It > doesn't feel like tons of work but, right now it is work we haven't even > started. > > - Devices > I've booted on the Square device obviously and this is my regular > hardware for upstream development. I've also booted on the Sony Xperia M4 > Aqua including mutli-core bring-up, WiFi and ADB. > > Dependencies for this drop: > > qcom-cpufreq-nvmem: Add msm8939 with some fixups > link: https://lore.kernel.org/linux-arm-msm/20220418162226.2983117-1-bryan.odonoghue@linaro.org/T/#t > > Fix apq8016 compat string > link: https://lore.kernel.org/linux-arm-msm/20220418230956.3059563-1-bryan.odonoghue@linaro.org/T/#t > > dt-bindings: soc: qcom: smd-rpm: Fix missing MSM8936 compatible > link: https://lore.kernel.org/linux-arm-msm/20220418231857.3061053-1-bryan.odonoghue@linaro.org/T/#u > > Bootable tree here: > https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=v5.18-rc2%2bapq8039-without-cpr > > Bryan O'Donoghue (3): > arm64: dts: qcom: Add msm8939 SoC > arm64: dts: qcom: Add Square apq8039-t2 board > arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua > > Stephan Gerhold (1): > arm64: dts: qcom: Add msm8939-pm8916.dtsi include > > arch/arm64/boot/dts/qcom/Makefile | 2 + > arch/arm64/boot/dts/qcom/apq8039-t2.dts | 492 ++++ > arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi | 82 + > .../qcom/msm8939-sony-xperia-kanuti-tulip.dts | 184 ++ > arch/arm64/boot/dts/qcom/msm8939.dtsi | 2452 +++++++++++++++++ > 5 files changed, 3212 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/apq8039-t2.dts > create mode 100644 arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi > create mode 100644 arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts > create mode 100644 arch/arm64/boot/dts/qcom/msm8939.dtsi > ping
On Fri, 7 Apr 2023 20:49:00 +0100, Bryan O'Donoghue wrote: > V9: > - Fixes name of tsens > s4 is not present > s4->s5 > s5->s6 > s6->s7 > s7->s8 > s8->s9 > I erroneously thought the last sensor needed to be brought in but, > as has been pointed out to me, the last sensor isn't used, so > no need to support the reading and reassembly of the non-contiguous > calibration data - Stephan/Dmitry > > [...] Applied, thanks! [1/5] dt-bindings: vendor-prefixes: Add Square commit: 8051c8b83ac076ab7f4fc80cff5e7f8cc3b1eefb [2/5] arm64: dts: qcom: Add msm8939 SoC commit: 61550c6c156c3715baf54ab2cdd678c8c35b3803 [3/5] arm64: dts: qcom: Add msm8939-pm8916.dtsi include commit: 1e6dfe47ba020a192d743c7c820b469fd7253813 [4/5] arm64: dts: qcom: Add Square apq8039-t2 board commit: 273a3dc13eb746c7b7abe7ea682811a8dacc89d6 [5/5] arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua commit: f1134f738fad68c51a44216ab0f68a0f086a1a5e Best regards,
V9: - Fixes name of tsens s4 is not present s4->s5 s5->s6 s6->s7 s7->s8 s8->s9 I erroneously thought the last sensor needed to be brought in but, as has been pointed out to me, the last sensor isn't used, so no need to support the reading and reassembly of the non-contiguous calibration data - Stephan/Dmitry - pronto/s//wcnss - Stephan - tulip dr_mode = "otg" not dr_mode = "device" I set the value to device for debug purposes but the role-switch works just fine and should be upstream - Stephan - fixed alphabetisation in pm8939-8916.dtsi - bod Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-04-07-msm8939-nocpr Previous: https://lore.kernel.org/linux-arm-msm/20230330153222.2875121-1-bryan.odonoghue@linaro.org/ git diff linux-next-23-03-27-msm8939-nocpr -- arch/arm64/boot/dts/qcom/*39* V8: - Addresses all of Stephan's comments from v7 - Moves M4 Aqua display to a separate series - Retains s4_p1/p2 done on purpose I believe - Adds Konrad's RB as indicated Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-03-27-msm8939-nocpr Previous: https://lore.kernel.org/lkml/20230223153655.262783-1-bryan.odonoghue@linaro.org/ V7: - Addresses all of Konrad's asks on V6 - Adds Konrad's RB for patch #3 Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-23-msm8939-nocpr Previous: https://lore.kernel.org/lkml/20230222120411.55197-2-bryan.odonoghue@linaro.org/T/ V6: - Adds Krzysztof's Ack for Square vendor addition - Krzysztof - Incorporates all of Stephan's comments from V5, including dropping CPR dummy given the dependent patch [1] has been merged, now. Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-21-msm8939-nocpr Previous: https://lore.kernel.org/lkml/20230206012336.2130341-1-bryan.odonoghue@linaro.org/T/ [1]: https://lore.kernel.org/linux-arm-msm/20230208153913.24436-2-ansuelsmth@gmail.com/ V5: - Adds Square as a vendor - Krzysztof - typec_pd: usb-pd@38 - Krzysztof - Drops gcc clock controller extension. It looks like phy0 actually provides a PLL to phy1 for its byte clock. - Bryan, Krzysztof, Stephan - Adds RB Konrad as indicated - Konrad - wcnss VDDMX_AO -> VDDMX - Bjorn - Adds dsi_phy0 as clock-parent to dsi1 - mdss interconnect drops Androidism "register-mem" - Stephan - cpu power-domain. I've retained the "dummy" cpr reference to satiate dtbs_check [1] but renamed &vreg_cpr_stub to remove any confusion between now and when we finish off CPR on 8939. Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-02-msm8939-nocpr Previous: https://lore.kernel.org/linux-arm-msm/20230123023127.1186619-1-bryan.odonoghue@linaro.org/ [1] https://lore.kernel.org/linux-arm-msm/20230126150026.14590-1-ansuelsmth@gmail.com/ V4: - Adds Krzysztof's RB to snoc-mm - Re-orders alphabetically missed nodes in previous iteration - Bjorn - Adds LK address/size cells comment - Bjorn - Left _AO for wcnss as downstream reference uses this - Bjorn/Bryan - Uses qcom,ids.h and QCOM_ID_SOCNAME for qcom,msm-id - Bjorn - Revises comment from "Regulator" to "Power supply" - Bjorn - Leaves dummy power-domain reference in cpu defintion as this - Relabels "cpu" to "CPU" to be more consistent with other dtsi - Bryan - Moves msm8939 gcc to its own yaml file to capture 8939 specific form - Bryan is a required property and the dt checker complains - Stephan/Bryan - Removes CPR entries from qfprom - Stephan - Left MDSS interconnects. I don't see a bug to fix here - Stephan/Bryan - power-domain in MDSS - dropped its not longer required after commit a6f033938beb ("dt-bindings: msm: dsi-controller-main: Fix power-domain constraint") - Stephan - Adds gcc dsi1pll and dsi1pllbyte to gcc clock list. Reviewing the silicon documentation we see dsi0_phy_pll is used to clock GCC_BYTE1_CFG_RCGR : SRC_SEL Root Source Select 000 : cxo 001 : dsi0_phy_pll_out_byteclk 010 : GPLL0_OUT_AUX 011 : gnd 100 : gnd 101 : gnd 110 : gnd 111 : reserved - Stephan/Bryan - pm8916_l16 -> pm8916_l6 in dsi definition, typo - Konrad - Moved regulator_set_load location - Konrad Previous: https://lore.kernel.org/lkml/20230118050948.bibhq26s6sgzullg@builder.lan/T/ Bootable: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-23-msm8939-nocpr V3: - Happily I don't currently depend on any other series to be merged. Bjorn and Chanwoo picked up everything I need to unblock this series. ＼(^o^)／ - Moves xo_board to RPM/PMIC clock gated CXO, not including rpmcc: obvs - Konrad/Bjorn - qcom,msm-id = <239 0> - left as in V2 valid according to Sony references - bod - cpu-release-addr - as stated below we rely on lk2nd to take the second cluster out of reset - bod - smem child node update - Konrad - Whitespace updates - Konrad - gpu no interconnect - Konrad - No bod - 19.2 MHz dropped from timer@b020000 - Konrad - Added vreg_dummy comment - Konrad - sdc_pins grouped - Konrad - startup-delay-us = <0> - left as is - bias - added no-bias - Konrad - :g/msmgpio/s//tlmm/g - Konrad - mdss/s//display-controller - Konrad - l11 set-load - Korad - l12 upper voltage raised to 3.3v since this is what the downstream kernel says when I boot and interrogate it - bod - sdhc@address - Discussed with Krzysztof and implemented as discussed - snoc-mm fix - Discussed with Krzysztof implemented if:then:else:not - dtc -I dtb -fs apq8039-t2.dtb prodcues /soc@0/i2c@78b5000: duplicate unit-address as does every other component that uses this polymorphic dts node - Renamed type-c i2c port manager IC to "typec" - Krzysztof /smsm/hexagon@1: Missing #address-cells in interrupt provider Same output as other upstream and recently upstreamed SoCs I left these alone for now link: https://lore.kernel.org/lkml/20230103010904.3201835-1-bryan.odonoghue@linaro.org/T/ bootable: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-16-msm8939-nocpr V2: - Sorts core dtsi node list by address followed by alpahbetical sorting within address sorted nodes - Bjorn - Drops use of 8916-pins - Bjorn - Adds msm8939-pm8916.dtsi - Stephan - Fixes every dts splat from previous submission minus non-converted .txt compat strings [1] and one yaml error in Bjorn's tree not in -next yet - I haven't applied Dmitry's change for tsens since that's not been picked up yet - Picks up a number of suggestions and fixes from Stephan Gerhold and Vincent Knecht - Depends on Applied: [PATCH v4 0/7] remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953 https://lore.kernel.org/linux-arm-msm/167216232800.738877.17567287056128563074.b4-ty@kernel.org/ [PATCH v6 0/5] remoteproc: qcom: Add support for pronto-v3 https://lore.kernel.org/linux-arm-msm/167216232801.738877.15895916910585144737.b4-ty@kernel.org/ [PATCH v6 00/18] mdss-dsi-ctrl binding and dts fixes https://lore.kernel.org/linux-arm-msm/167233461766.1099840.17628700245792986354.b4-ty@kernel.org/ Awaiting application: https://lore.kernel.org/linux-arm-msm/20221228133058.213886-1-bryan.odonoghue@linaro.org/ - Previous https://lore.kernel.org/linux-arm-msm/20220419010903.3109514-1-bryan.odonoghue@linaro.org/ - Bootable tree https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-03-msm8939-no-cpr - [1] DTC_CHK arch/arm64/boot/dts/qcom/apq8039-t2.dtb Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt qcom/apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible:0: 'qcom,idle-state-spc' is not one of ['arm,idle-state', 'riscv,idle-state'] From schema: Documentation/devicetree/bindings/cpu/idle-states.yaml qcom/apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible: ['qcom,idle-state-spc', 'arm,idle-state'] is too long From schema: Documentation/devicetree/bindings/cpu/idle-states.yaml arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /cpus/idle-states/cpu-sleep-0: failed to match any schema with compatible: ['qcom,idle-state-spc', 'arm,idle-state'] Documentation/devicetree/bindings/iommu/qcom,iommu.txt arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000: failed to match any schema with compatible: ['qcom,msm8916-iommu', 'qcom,msm-iommu-v1'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000/iommu-ctx@4000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1ef0000/iommu-ctx@5000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-sec'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000: failed to match any schema with compatible: ['qcom,msm8916-iommu', 'qcom,msm-iommu-v1'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000/iommu-ctx@1000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/iommu@1f08000/iommu-ctx@2000: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns'] arch/arm64/boot/dts/qcom/pm8916.dtsi f5d7bca55425c8 qcom/apq8039-t2.dtb: pmic@0: 'extcon@1300' does not match any of the regexes: '(.*)?(wled|leds)@[0-9a-f]+$', '^adc-tm@[0-9a-f]+$', '^adc@[0-9a-f]+$', '^audio-codec@[0-9a-f]+$', '^charger@[0-9a-f]+$', '^mpps@[0-9a-f]+$', '^rtc@[0-9a-f]+$', '^temp-alarm@[0-9a-f]+$', '^usb-detect@[0-9a-f]+$', '^usb-vbus-regulator@[0-9a-f]+$', '^vibrator@[0-9a-f]+$', 'gpio@[0-9a-f]+$', 'pinctrl-[0-9]+', 'pon@[0-9a-f]+$' From schema: Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/spmi@200f000/pmic@1/audio-codec@f000: failed to match any schema with compatible: ['qcom,pm8916-wcd-analog-codec'] yaml documentation error not yet in -next arm64/boot/dts/qcom/apq8039-t2.dtb: remoteproc@4080000: qcom,halt-regs:0: [33] is too short From schema: Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/usb@78d9000: failed to match any schema with compatible: ['qcom,ci-hdrc'] Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt: compatible = "qcom,kpss-acc-v2"; arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b088000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b098000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b0a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b0b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b188000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b198000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b1a8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@0/clock-controller@b1b8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2'] V1: This series adds in MSM8939 SoC support with two supported devices. - CPU MSM8939 is a non-PSCI compliant device. As such in the downstreaming shipped image custom code is used to bring non-boot cores out of reset. This drop specifies the boot-method as spin-table instead and is completely standard. To accomplish this, we rely on lk2nd. https://github.com/msm8916-mainline/lk2nd/pull/142 - Serial - i2c - USB - eMMC - MDP/DSI - WiFi - Bluetooth What's not included - CPR We have CPR working in a 4.19 kernel quite well but for now it feels like putting the cart before the horse to gate the SoC and boards on CPR. - Venus I've been told this works but I haven't tried it myself and right now consider it maybe working but probably not 100%. - Sound We have a copy-exactly from the 4.19 kernel here in the DTS. I haven't run the sound through any sort of reasonable test. Vincent Knecht has some PostmarketOS kernels which use a 5.17 version of this DTS to get sound up so, I think sound is in good shape. - CAMSS There are slight differences between msm8916 and msm8939 for CAMSS. It doesn't feel like tons of work but, right now it is work we haven't even started. - Devices I've booted on the Square device obviously and this is my regular hardware for upstream development. I've also booted on the Sony Xperia M4 Aqua including mutli-core bring-up, WiFi and ADB. Dependencies for this drop: qcom-cpufreq-nvmem: Add msm8939 with some fixups link: https://lore.kernel.org/linux-arm-msm/20220418162226.2983117-1-bryan.odonoghue@linaro.org/T/#t Fix apq8016 compat string link: https://lore.kernel.org/linux-arm-msm/20220418230956.3059563-1-bryan.odonoghue@linaro.org/T/#t dt-bindings: soc: qcom: smd-rpm: Fix missing MSM8936 compatible link: https://lore.kernel.org/linux-arm-msm/20220418231857.3061053-1-bryan.odonoghue@linaro.org/T/#u Bootable tree here: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=v5.18-rc2%2bapq8039-without-cpr Bryan O'Donoghue (3): arm64: dts: qcom: Add msm8939 SoC arm64: dts: qcom: Add Square apq8039-t2 board arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua Stephan Gerhold (1): arm64: dts: qcom: Add msm8939-pm8916.dtsi include arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/apq8039-t2.dts | 492 ++++ arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi | 82 + .../qcom/msm8939-sony-xperia-kanuti-tulip.dts | 184 ++ arch/arm64/boot/dts/qcom/msm8939.dtsi | 2452 +++++++++++++++++ 5 files changed, 3212 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/apq8039-t2.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8939.dtsi