mbox series

[v5,0/4] Update Energy Model after chip binning adjusted voltages

Message ID 20240403154907.1420245-1-lukasz.luba@arm.com (mailing list archive)
Headers show
Series Update Energy Model after chip binning adjusted voltages | expand

Message

Lukasz Luba April 3, 2024, 3:49 p.m. UTC
Hi all,

This is a follow-up patch aiming to add EM modification due to chip binning.
The first RFC and the discussion can be found here [1].

It uses Exynos chip driver code as a 1st user. The EM framework has been
extended to handle this use case easily, when the voltage has been changed
after setup. On my Odroid-xu4 in some OPPs I can observe ~20% power difference.
According to that data in driver tables it could be up to ~29%.

This chip binning is applicable to a lot of SoCs, so the EM framework should
make it easy to update. It uses the existing OPP and DT information to
re-calculate the new power values.

It has dependency on Exynos SoC driver tree.

Changes:
v5:
- adjusted aligning of the function arguments in patch 1/4 (Dietmar)
- adjusted the in-code comment patch 4/4 (Dietmar)
- added Reviewed-by to all patches (Dietmar)
v4:
- added asterisk in the comment section (test robot)
- change the patch 2/4 header name and use 'Refactor'
v3:
- updated header description patch 2/4 (Dietmar)
- removed 2 sentences from comment and adjusted in patch 3/4 (Dietmar)
- patch 4/4 re-phrased code comment (Dietmar)
- collected tags (Krzysztof, Viresh)
v2:
- removed 'ret' from error message which wasn't initialized (Christian)
v1:
- exported the OPP calculation function from the OPP/OF so it can be
  used from EM fwk (Viresh)
- refactored EM updating function to re-use common code
- added new EM function which can be used by chip device drivers which
  modify the voltage in OPPs
RFC is at [1]

Regards,
Lukasz Luba

[1] https://lore.kernel.org/lkml/20231220110339.1065505-1-lukasz.luba@arm.com/

Lukasz Luba (4):
  OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
  PM: EM: Refactor em_adjust_new_capacity()
  PM: EM: Add em_dev_update_chip_binning()
  soc: samsung: exynos-asv: Update Energy Model after adjusting voltage

 drivers/opp/of.c                 |  17 +++--
 drivers/soc/samsung/exynos-asv.c |  10 ++-
 include/linux/energy_model.h     |   5 ++
 include/linux/pm_opp.h           |   8 +++
 kernel/power/energy_model.c      | 106 +++++++++++++++++++++++++------
 5 files changed, 121 insertions(+), 25 deletions(-)

Comments

Rafael J. Wysocki April 8, 2024, 2:06 p.m. UTC | #1
On Wed, Apr 3, 2024 at 5:49 PM Lukasz Luba <lukasz.luba@arm.com> wrote:
>
> Hi all,
>
> This is a follow-up patch aiming to add EM modification due to chip binning.
> The first RFC and the discussion can be found here [1].
>
> It uses Exynos chip driver code as a 1st user. The EM framework has been
> extended to handle this use case easily, when the voltage has been changed
> after setup. On my Odroid-xu4 in some OPPs I can observe ~20% power difference.
> According to that data in driver tables it could be up to ~29%.
>
> This chip binning is applicable to a lot of SoCs, so the EM framework should
> make it easy to update. It uses the existing OPP and DT information to
> re-calculate the new power values.
>
> It has dependency on Exynos SoC driver tree.
>
> Changes:
> v5:
> - adjusted aligning of the function arguments in patch 1/4 (Dietmar)
> - adjusted the in-code comment patch 4/4 (Dietmar)
> - added Reviewed-by to all patches (Dietmar)
> v4:
> - added asterisk in the comment section (test robot)
> - change the patch 2/4 header name and use 'Refactor'
> v3:
> - updated header description patch 2/4 (Dietmar)
> - removed 2 sentences from comment and adjusted in patch 3/4 (Dietmar)
> - patch 4/4 re-phrased code comment (Dietmar)
> - collected tags (Krzysztof, Viresh)
> v2:
> - removed 'ret' from error message which wasn't initialized (Christian)
> v1:
> - exported the OPP calculation function from the OPP/OF so it can be
>   used from EM fwk (Viresh)
> - refactored EM updating function to re-use common code
> - added new EM function which can be used by chip device drivers which
>   modify the voltage in OPPs
> RFC is at [1]
>
> Regards,
> Lukasz Luba
>
> [1] https://lore.kernel.org/lkml/20231220110339.1065505-1-lukasz.luba@arm.com/
>
> Lukasz Luba (4):
>   OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
>   PM: EM: Refactor em_adjust_new_capacity()
>   PM: EM: Add em_dev_update_chip_binning()
>   soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
>
>  drivers/opp/of.c                 |  17 +++--
>  drivers/soc/samsung/exynos-asv.c |  10 ++-
>  include/linux/energy_model.h     |   5 ++
>  include/linux/pm_opp.h           |   8 +++
>  kernel/power/energy_model.c      | 106 +++++++++++++++++++++++++------
>  5 files changed, 121 insertions(+), 25 deletions(-)
>
> --

All patches in the series applied as 6.10 material, thanks!
Lukasz Luba April 9, 2024, 7:07 a.m. UTC | #2
On 4/8/24 15:06, Rafael J. Wysocki wrote:
> On Wed, Apr 3, 2024 at 5:49 PM Lukasz Luba <lukasz.luba@arm.com> wrote:
>>
>> Hi all,
>>
>> This is a follow-up patch aiming to add EM modification due to chip binning.
>> The first RFC and the discussion can be found here [1].
>>
>> It uses Exynos chip driver code as a 1st user. The EM framework has been
>> extended to handle this use case easily, when the voltage has been changed
>> after setup. On my Odroid-xu4 in some OPPs I can observe ~20% power difference.
>> According to that data in driver tables it could be up to ~29%.
>>
>> This chip binning is applicable to a lot of SoCs, so the EM framework should
>> make it easy to update. It uses the existing OPP and DT information to
>> re-calculate the new power values.
>>
>> It has dependency on Exynos SoC driver tree.
>>
>> Changes:
>> v5:
>> - adjusted aligning of the function arguments in patch 1/4 (Dietmar)
>> - adjusted the in-code comment patch 4/4 (Dietmar)
>> - added Reviewed-by to all patches (Dietmar)
>> v4:
>> - added asterisk in the comment section (test robot)
>> - change the patch 2/4 header name and use 'Refactor'
>> v3:
>> - updated header description patch 2/4 (Dietmar)
>> - removed 2 sentences from comment and adjusted in patch 3/4 (Dietmar)
>> - patch 4/4 re-phrased code comment (Dietmar)
>> - collected tags (Krzysztof, Viresh)
>> v2:
>> - removed 'ret' from error message which wasn't initialized (Christian)
>> v1:
>> - exported the OPP calculation function from the OPP/OF so it can be
>>    used from EM fwk (Viresh)
>> - refactored EM updating function to re-use common code
>> - added new EM function which can be used by chip device drivers which
>>    modify the voltage in OPPs
>> RFC is at [1]
>>
>> Regards,
>> Lukasz Luba
>>
>> [1] https://lore.kernel.org/lkml/20231220110339.1065505-1-lukasz.luba@arm.com/
>>
>> Lukasz Luba (4):
>>    OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
>>    PM: EM: Refactor em_adjust_new_capacity()
>>    PM: EM: Add em_dev_update_chip_binning()
>>    soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
>>
>>   drivers/opp/of.c                 |  17 +++--
>>   drivers/soc/samsung/exynos-asv.c |  10 ++-
>>   include/linux/energy_model.h     |   5 ++
>>   include/linux/pm_opp.h           |   8 +++
>>   kernel/power/energy_model.c      | 106 +++++++++++++++++++++++++------
>>   5 files changed, 121 insertions(+), 25 deletions(-)
>>
>> --
> 
> All patches in the series applied as 6.10 material, thanks!

Thank you Rafael!

Regards,
Lukasz