mbox series

[0/5] Add support for MBG Thermal monitoring device

Message ID 20240712-mbg-tm-support-v1-0-7d78bec920ca@quicinc.com (mailing list archive)
Headers show
Series Add support for MBG Thermal monitoring device | expand

Message

Satya Priya Kakitapalli July 12, 2024, 12:43 p.m. UTC
Add bindings, driver and DT for the Qualcomm's MBG thermal
monitoring device.

Please note that this series is dependent on [1] which adds
ADC5-GEN3 support.

[1] https://lore.kernel.org/linux-iio/20231231171237.3322376-1-quic_jprakash@quicinc.com/

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
---
Satya Priya Kakitapalli (5):
      dt-bindings: iio: adc: Add ADC5 GEN3 Channel info for pm8775 PMIC
      dt-bindings: thermal: qcom: Add MBG thermal monitor bindings
      thermal: qcom: Add support for MBG Temp monitor
      ARM: dts: qcom: Add vadc support for pm8775 pmic on SA8775P
      ARM: dts: qcom: Add support for MBG TM for pm8775 on SA8775P

 .../bindings/thermal/qcom-spmi-mbg-tm.yaml         |  63 +++++
 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi        | 210 ++++++++++++++++
 drivers/thermal/qcom/Kconfig                       |  11 +
 drivers/thermal/qcom/Makefile                      |   1 +
 drivers/thermal/qcom/qcom-spmi-mbg-tm.c            | 269 +++++++++++++++++++++
 .../iio/adc/qcom,spmi-adc5-gen3-pm8775.h           |  42 ++++
 6 files changed, 596 insertions(+)
---
base-commit: c27723304c1f6af79f7bece5edacace6a8d46167
change-id: 20240627-mbg-tm-support-7bbf25c246e1

Best regards,

Comments

Neil Armstrong July 12, 2024, 2:39 p.m. UTC | #1
Hi,

On 12/07/2024 14:43, Satya Priya Kakitapalli wrote:
> Add bindings, driver and DT for the Qualcomm's MBG thermal
> monitoring device.
> 
> Please note that this series is dependent on [1] which adds
> ADC5-GEN3 support.
> 
> [1] https://lore.kernel.org/linux-iio/20231231171237.3322376-1-quic_jprakash@quicinc.com/

Since this dependency was sent almost 7 months ago, and had plenty of changes requests,
this patchset should've been either delayed until a proper support of ADC5-GEN3
was accepted or marked as RFC.

> 
> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
> ---
> Satya Priya Kakitapalli (5):
>        dt-bindings: iio: adc: Add ADC5 GEN3 Channel info for pm8775 PMIC
>        dt-bindings: thermal: qcom: Add MBG thermal monitor bindings
>        thermal: qcom: Add support for MBG Temp monitor
>        ARM: dts: qcom: Add vadc support for pm8775 pmic on SA8775P
>        ARM: dts: qcom: Add support for MBG TM for pm8775 on SA8775P

Those should be: "arm64: dts: qcom: sa8775p-pmics: ..."

> 
>   .../bindings/thermal/qcom-spmi-mbg-tm.yaml         |  63 +++++
>   arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi        | 210 ++++++++++++++++
>   drivers/thermal/qcom/Kconfig                       |  11 +
>   drivers/thermal/qcom/Makefile                      |   1 +
>   drivers/thermal/qcom/qcom-spmi-mbg-tm.c            | 269 +++++++++++++++++++++
>   .../iio/adc/qcom,spmi-adc5-gen3-pm8775.h           |  42 ++++
>   6 files changed, 596 insertions(+)
> ---
> base-commit: c27723304c1f6af79f7bece5edacace6a8d46167
> change-id: 20240627-mbg-tm-support-7bbf25c246e1
> 
> Best regards,

Neil