[v5,0/6] RTL9300 support for reboot and i2c

Message

Chris Packham Sept. 25, 2024, 9:58 p.m. UTC

As requested I've combined my two series into a single one to provide some
better context for reviewers. I'm not sure which trees the patches should go in
via. The first two are reasonably independent and could go in via linux-pm. I
guess technically the last one could go via linux-i2c but it needs the and the
bindings/dts updates which would probably make sense to come via linux-mips.

--
2.46.1

Chris Packham (6):
  dt-bindings: reset: syscon-reboot: Add reg property
  power: reset: syscon-reboot: Accept reg property
  dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  mips: dts: realtek: Add syscon-reboot node
  mips: dts: realtek: Add I2C controllers
  i2c: Add driver for the RTL9300 I2C controller

 .../bindings/i2c/realtek,rtl9300-i2c.yaml     |  98 ++++
 .../bindings/mfd/realtek,rtl9300-switch.yaml  | 115 +++++
 .../bindings/power/reset/syscon-reboot.yaml   |  11 +-
 MAINTAINERS                                   |   7 +
 .../cameo-rtl9302c-2x-rtl8224-2xge.dts        |   2 +-
 arch/mips/boot/dts/realtek/rtl9302c.dtsi      |  15 +
 arch/mips/boot/dts/realtek/rtl930x.dtsi       |  29 ++
 drivers/i2c/busses/Kconfig                    |  10 +
 drivers/i2c/busses/Makefile                   |   1 +
 drivers/i2c/busses/i2c-rtl9300.c              | 422 ++++++++++++++++++
 drivers/power/reset/syscon-reboot.c           |   3 +-
 11 files changed, 710 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl9300-switch.yaml
 create mode 100644 arch/mips/boot/dts/realtek/rtl9302c.dtsi
 create mode 100644 drivers/i2c/busses/i2c-rtl9300.c