mbox series

[v5,0/5] Add support for IPQ5018 tsens

Message ID DS7PR19MB88832FDED68D3EBB0EE7E99F9DC72@DS7PR19MB8883.namprd19.prod.outlook.com (mailing list archive)
Headers show
Series Add support for IPQ5018 tsens | expand

Message

George Moussalem Feb. 21, 2025, 4:10 p.m. UTC 
IPQ5018 has tsens V1.0 IP with 4 sensors and 1 interrupt.
There is no RPM present in the soc to do tsens early enable.
Adding support for the same here.

[v5]
 	*) Adjusted commit messages to indicate IPQ5018 has 5 sensors of
	   which 4 are described and in use as per downstream driver and
           dts.
	*) Padded addresses of tsens and qfprom nodes with leading zeros.

[v4]
	*) Documented ipq5018 in qcom,qfprom bindings
	*) Constrained ipq5018-tsens to one interrupt with description
	*) Added Rob's Acked-by tag
	*) Added Dmitry's Reviewed-by tag
	*) Fixed modpost warning: added __init to init_common
	*) Sorted tsens nodes by address
	*) Sorted thermal-zones nodes by name
	*) Link to v3: https://lore.kernel.org/all/20230922115116.2748804-1-srichara@win-platform-upstream01.qualcomm.com/

[v3]
	*) Added the tsens-ipq5018 as  new binding without rpm
        *) Added Dmitry's Reviewed tag
        *) Fixed Dmitry's comments for error checks in init_ipq5018
        *) Ordered the qfprom device node properties
	*) Link to v2: https://lore.kernel.org/all/20230915121504.806672-1-quic_srichara@quicinc.com/

[v2]
	*) Sorted the compatible and removed example
	*) Fixed the name for new tsens_feature
	*) Used tsend_calibrate_common instead of legacy
	   and addressed comments from Dmitry.
	*) Squashed patch 3 & 4
	*) Fixed node names, order and added qfprom cells
            for points seprately
	*) Squashed patch 6 & 7
	*) Link to v1: https://lore.kernel.org/all/1693250307-8910-1-git-send-email-quic_srichara@quicinc.com/

Sricharan Ramabadhran (5):
  dt-bindings: nvmem: Add compatible for IPQ5018
  dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
  thermal: drivers: qcom: Add new feat for soc without rpm
  thermal: qcom: tsens: Add support for IPQ5018 tsens
  arm64: dts: qcom: ipq5018: Add tsens node

 .../bindings/nvmem/qcom,qfprom.yaml           |   1 +
 .../bindings/thermal/qcom-tsens.yaml          |   2 +
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 169 ++++++++++++++++++
 drivers/thermal/qcom/tsens-v1.c               |  60 +++++++
 drivers/thermal/qcom/tsens.c                  |   5 +-
 drivers/thermal/qcom/tsens.h                  |   5 +-
 6 files changed, 240 insertions(+), 2 deletions(-)