Show patches with: State = Action Required       |    Archived = No       |   145 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v6,12/12] thermal: qoriq: Add hwmon support QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-06-17 Andrey Smirnov New
[v6,11/12] thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs() QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-06-17 Andrey Smirnov New
[v6,10/12] thermal: qoriq: Do not report invalid temperature reading QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-06-17 Andrey Smirnov New
[v6,09/12] thermal: qoriq: Enable all sensors before registering them QorIQ TMU multi-sensor and HWMON support - - 1 0 0 0 2019-06-17 Andrey Smirnov New
[v6,08/12] thermal: qoriq: Convert driver to use regmap API QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-06-17 Andrey Smirnov New
[v6,07/12] thermal: qoriq: Convert driver to use devm_ioremap() QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-06-17 Andrey Smirnov New
[v6,06/12] thermal: qoriq: Pass data to qoriq_tmu_calibration() directly QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-06-17 Andrey Smirnov New
[v6,05/12] thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly QorIQ TMU multi-sensor and HWMON support 1 - 1 0 0 0 2019-06-17 Andrey Smirnov New
[v6,04/12] thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data QorIQ TMU multi-sensor and HWMON support - - - 0 0 0 2019-06-17 Andrey Smirnov New
[v6,03/12] thermal: qoriq: Add local struct qoriq_sensor pointer QorIQ TMU multi-sensor and HWMON support - - - 0 0 0 2019-06-17 Andrey Smirnov New
[v6,02/12] thermal: qoriq: Don't store struct thermal_zone_device reference QorIQ TMU multi-sensor and HWMON support 1 - 1 0 0 0 2019-06-17 Andrey Smirnov New
[v6,01/12] thermal: qoriq: Add local struct device pointer QorIQ TMU multi-sensor and HWMON support 1 - 1 0 0 0 2019-06-17 Andrey Smirnov New
sched/topology: remove unused sd param from arch_scale_cpu_capacity() sched/topology: remove unused sd param from arch_scale_cpu_capacity() - 1 - 0 0 0 2019-06-17 Vincent Guittot New
cpupower: Add missing newline at end of file cpupower: Add missing newline at end of file - - - 0 0 0 2019-06-17 Geert Uytterhoeven New
[3/3] powercap/intel_rapl: add support for ICX-D powercap/intel_rapl: add support for more Icelake platforms - - - 0 0 0 2019-06-17 Zhang Rui New
[2/3] powercap/intel_rapl: add support for ICX powercap/intel_rapl: add support for more Icelake platforms - - - 0 0 0 2019-06-17 Zhang Rui New
[1/3] powercap/intel_rapl: add support for IceLake desktop powercap/intel_rapl: add support for more Icelake platforms - - - 0 0 0 2019-06-17 Zhang Rui New
ACPICA: Clear status of GPEs on first direct enable ACPICA: Clear status of GPEs on first direct enable - - 2 0 0 0 2019-06-17 Rafael J. Wysocki New
thermal: imx: skip registering legacy cooling on i.MX7 thermal: imx: skip registering legacy cooling on i.MX7 - - - 0 0 0 2019-06-14 Andrey Smirnov evalenti New
[1/2] tools/power turbostat: Add Ice Lake NNPI support [1/2] tools/power turbostat: Add Ice Lake NNPI support - - - 0 0 0 2019-06-14 Rajneesh Bhardwaj lenb New
thermal: rcar_gen3_thermal: Fix Wshift-negative-value thermal: rcar_gen3_thermal: Fix Wshift-negative-value - - - 0 0 0 2019-06-13 Nathan Huckleberry evalenti New
thermal: armada: Fix -Wshift-negative-value thermal: armada: Fix -Wshift-negative-value - 1 - 0 0 0 2019-06-13 Nathan Huckleberry evalenti New
thermal: intel: no need to check return value of debugfs_create functions thermal: intel: no need to check return value of debugfs_create functions - 1 - 0 0 0 2019-06-13 Greg Kroah-Hartman Zhang Rui New
thermal: intel_powerclamp: no need to check return value of debugfs_create functions thermal: intel_powerclamp: no need to check return value of debugfs_create functions - 1 - 0 0 0 2019-06-13 Greg Kroah-Hartman Zhang Rui New
thermal: tegra: no need to check return value of debugfs_create functions thermal: tegra: no need to check return value of debugfs_create functions 1 - - 0 0 0 2019-06-13 Greg Kroah-Hartman evalenti New
thermal: bcm2835: no need to check return value of debugfs_create functions thermal: bcm2835: no need to check return value of debugfs_create functions - - - 0 0 0 2019-06-13 Greg Kroah-Hartman evalenti New
[2/2] thermal/drivers/core: Use governor table to initialize [1/2] thermal/drivers/core: Add init section table for self-encapsulation - 1 - 0 0 0 2019-06-12 Daniel Lezcano Zhang Rui New
[1/2] thermal/drivers/core: Add init section table for self-encapsulation [1/2] thermal/drivers/core: Add init section table for self-encapsulation - 1 - 0 0 0 2019-06-12 Daniel Lezcano Zhang Rui New
[v4,7/7] arm64: defconfig: enable cpufreq support for RPi3 cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,6/7] ARM: defconfig: enable cpufreq driver for RPi cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,5/7] clk: raspberrypi: register platform device for raspberrypi-cpufreq cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,4/7] cpufreq: add driver for Raspberry Pi cpufreq support for Raspberry Pi 1 1 - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,3/7] firmware: raspberrypi: register clk device cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,2/7] clk: bcm283x: add driver interfacing with Raspberry Pi's firmware cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,1/7] clk: bcm2835: remove pllb cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[RESEND,v4,2/2] dt-bindings: cpufreq: Document allwinner,sun50i-h6-operating-points cpufreq: Add sunxi nvmem based CPU scaling driver 1 - - 0 0 0 2019-06-12 Frank Lee vireshk New
[RESEND,v4,1/2] cpufreq: Add sun50i nvmem based CPU scaling driver cpufreq: Add sunxi nvmem based CPU scaling driver 1 - - 0 0 0 2019-06-12 Frank Lee vireshk New
[V14,5/5] arm64: dts: imx: add i.MX8QXP thermal support [V14,1/5] dt-bindings: fsl: scu: add thermal binding - - - 0 0 0 2019-06-10 Anson Huang evalenti New
[V14,4/5] defconfig: arm64: add i.MX system controller thermal support [V14,1/5] dt-bindings: fsl: scu: add thermal binding - - - 0 0 0 2019-06-10 Anson Huang evalenti New
[V14,3/5] thermal: imx_sc: add i.MX system controller thermal support [V14,1/5] dt-bindings: fsl: scu: add thermal binding - - - 0 0 0 2019-06-10 Anson Huang evalenti New
[V14,2/5] thermal: of-thermal: add API for getting sensor ID from DT [V14,1/5] dt-bindings: fsl: scu: add thermal binding - - - 0 0 0 2019-06-10 Anson Huang evalenti New
[V14,1/5] dt-bindings: fsl: scu: add thermal binding [V14,1/5] dt-bindings: fsl: scu: add thermal binding - 2 - 0 0 0 2019-06-10 Anson Huang evalenti New
[1/1] tools/power/cpupower: fix 64bit detection when cross-compiling [1/1] tools/power/cpupower: fix 64bit detection when cross-compiling - - - 0 0 0 2019-06-07 S├ębastien Szymanski shuahkh New
turbostat: Fix Haswell Core systems turbostat: Fix Haswell Core systems - - - 0 0 0 2019-06-05 Prarit Bhargava lenb New
[v2,5/5] ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT Add imx7d speed grading and higher OPPs - - - 0 0 0 2019-06-05 Leonard Crestez vireshk New
[v2,4/5] ARM: dts: imx7d: Update cpufreq OPP table Add imx7d speed grading and higher OPPs - - - 0 0 0 2019-06-05 Leonard Crestez vireshk New
[v2,3/5] ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading Add imx7d speed grading and higher OPPs - - - 0 0 0 2019-06-05 Leonard Crestez vireshk New
[v2,2/5] cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading Add imx7d speed grading and higher OPPs - - - 0 0 0 2019-06-05 Leonard Crestez vireshk New
[v2,1/5] cpufreq: imx-cpufreq-dt: Remove global platform match list Add imx7d speed grading and higher OPPs - - - 0 0 0 2019-06-05 Leonard Crestez vireshk New
thermal: qoriq: add thermal monitor unit version 2 support thermal: qoriq: add thermal monitor unit version 2 support - - - 0 0 0 2019-06-04 Andy Tang evalenti New
[1/3] drivers: cpufreq: cpufreq-nforce2: remove unnecessary #ifdef MODULE [1/3] drivers: cpufreq: cpufreq-nforce2: remove unnecessary #ifdef MODULE - - - 0 0 0 2019-06-01 Enrico Weigelt, metux IT consult New
[-next] cpufreq: armada-37xx: Remove set but not used variable 'freq' [-next] cpufreq: armada-37xx: Remove set but not used variable 'freq' - - - 0 0 0 2019-06-01 Yuehaibing vireshk New
[-next] thermal: Fix platform_no_drv_owner.cocci warnings [-next] thermal: Fix platform_no_drv_owner.cocci warnings - - - 0 0 0 2019-06-01 Yuehaibing Zhang Rui New
[v5,3/3] thermal: cpu_cooling: Migrate to using the EM framework Make IPA use PM_EM 2 - - 0 0 0 2019-05-30 Quentin Perret evalenti New
[v5,2/3] thermal: cpu_cooling: Make the power-related code depend on IPA Make IPA use PM_EM 2 - - 0 0 0 2019-05-30 Quentin Perret evalenti New
[v5,1/3] arm64: defconfig: Enable CONFIG_ENERGY_MODEL Make IPA use PM_EM 2 - - 0 0 0 2019-05-30 Quentin Perret evalenti New
[3/3] cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading [1/3] ARM: dts: imx7d: Update cpufreq OPP table - - - 0 0 0 2019-05-29 Leonard Crestez vireshk New
[2/3] ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT [1/3] ARM: dts: imx7d: Update cpufreq OPP table - - - 0 0 0 2019-05-29 Leonard Crestez vireshk New
[1/3] ARM: dts: imx7d: Update cpufreq OPP table [1/3] ARM: dts: imx7d: Update cpufreq OPP table - - - 0 0 0 2019-05-29 Leonard Crestez vireshk New
cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts - - - 0 0 0 2019-05-29 Leonard Crestez vireshk New
cpupower : frequency-set -r option misses the last cpu in related cpu list cpupower : frequency-set -r option misses the last cpu in related cpu list - 1 - 0 0 0 2019-05-29 Abhishek Goel shuahkh New
[RESEND,V13,5/5] arm64: dts: imx: add i.MX8QXP thermal support [RESEND,V13,1/5] dt-bindings: fsl: scu: add thermal binding - - - 0 0 0 2019-05-28 Anson Huang evalenti New
[RESEND,V13,4/5] defconfig: arm64: add i.MX system controller thermal support [RESEND,V13,1/5] dt-bindings: fsl: scu: add thermal binding - - - 0 0 0 2019-05-28 Anson Huang evalenti New
[RESEND,V13,3/5] thermal: imx_sc: add i.MX system controller thermal support [RESEND,V13,1/5] dt-bindings: fsl: scu: add thermal binding - - - 0 0 0 2019-05-28 Anson Huang evalenti New
[RESEND,V13,2/5] thermal: of-thermal: add API for getting sensor ID from DT [RESEND,V13,1/5] dt-bindings: fsl: scu: add thermal binding - - - 0 0 0 2019-05-28 Anson Huang evalenti New
[RESEND,V13,1/5] dt-bindings: fsl: scu: add thermal binding [RESEND,V13,1/5] dt-bindings: fsl: scu: add thermal binding - 1 - 0 0 0 2019-05-28 Anson Huang evalenti New
[v3,3/3] thermal: fix indentation in makefile add thermal driver for h6 - - - 0 0 0 2019-05-25 Frank Lee evalenti New
[v3,2/3] dt-bindings: thermal: add binding document for h6 thermal controller add thermal driver for h6 - - - 0 0 0 2019-05-25 Frank Lee evalenti New
[v3,1/3] thermal: sun8i: add thermal driver for h6 add thermal driver for h6 - - - 0 0 0 2019-05-25 Frank Lee evalenti New
[v4,3/3] soc: fsl: add RCPM driver [v4,1/3] PM: wakeup: Add routine to help fetch wakeup source object. 1 - - 0 0 0 2019-05-20 Ran Wang New
[v4,2/3] Documentation: dt: binding: fsl: Add 'little-endian' and update Chassis define [v4,1/3] PM: wakeup: Add routine to help fetch wakeup source object. - 1 - 0 0 0 2019-05-20 Ran Wang New
[v4,1/3] PM: wakeup: Add routine to help fetch wakeup source object. [v4,1/3] PM: wakeup: Add routine to help fetch wakeup source object. - - - 0 0 0 2019-05-20 Ran Wang New
[v2] x86/turbostat: Dynamically increase output buffer [v2] x86/turbostat: Dynamically increase output buffer - - - 0 0 0 2019-05-17 Prarit Bhargava lenb New
tools/power turbostat: Increase default buffer size tools/power turbostat: Increase default buffer size - - - 0 0 0 2019-05-14 Prarit Bhargava lenb New
thermal: make thermal_cooling_device_register accepts const string thermal: make thermal_cooling_device_register accepts const string - - - 0 0 0 2019-05-14 Wei Wang Zhang Rui New
[v4,5/5] arm64: defconfig: ARM_IMX_CPUFREQ_DT=m cpufreq: Add imx-cpufreq-dt driver for speed grading - - - 0 0 0 2019-05-13 Leonard Crestez vireshk New
[v4,4/5] arm64: dts: imx8mq: Add cpu speed grading and all OPPs cpufreq: Add imx-cpufreq-dt driver for speed grading 1 - - 0 0 0 2019-05-13 Leonard Crestez vireshk New
[v4,3/5] arm64: dts: imx8mm: Add cpu speed grading and all OPPs cpufreq: Add imx-cpufreq-dt driver for speed grading 1 - - 0 0 0 2019-05-13 Leonard Crestez vireshk New
[v4,2/5] dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage cpufreq: Add imx-cpufreq-dt driver for speed grading - 1 - 0 0 0 2019-05-13 Leonard Crestez vireshk New
[v4,1/5] cpufreq: Add imx-cpufreq-dt driver cpufreq: Add imx-cpufreq-dt driver for speed grading - - - 0 0 0 2019-05-13 Leonard Crestez vireshk New
[2/2] opp: Allocate genpd_virt_devs from dev_pm_opp_attach_genpd() [1/2] opp: Attach genpds to devices from within OPP core - - 1 0 0 0 2019-05-13 Viresh Kumar vireshk New
[1/2] opp: Attach genpds to devices from within OPP core [1/2] opp: Attach genpds to devices from within OPP core - - 1 0 0 0 2019-05-13 Viresh Kumar vireshk New
[v2] cpufreq: imx6q: Fix the resource leak caused by incorrect error return [v2] cpufreq: imx6q: Fix the resource leak caused by incorrect error return 1 1 - 0 0 0 2019-05-05 Jacky Bai vireshk New
drivers: thermal: processor_thermal: Read PPCC on resume drivers: thermal: processor_thermal: Read PPCC on resume - - - 0 0 0 2019-04-30 Srinivas Pandruvada Zhang Rui New
[v1] thermal: Add some error messages [v1] thermal: Add some error messages - - - 0 0 0 2019-04-26 Amit Kucheria Zhang Rui New
[v5,12/12] thermal: qoriq: Add hwmon support QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,11/12] thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs() QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,10/12] thermal: qoriq: Do not report invalid temperature reading QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,09/12] thermal: qoriq: Enable all sensors before registering them QorIQ TMU multi-sensor and HWMON support - - 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,08/12] thermal: qoriq: Convert driver to use regmap API QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,07/12] thermal: qoriq: Convert driver to use devm_ioremap() QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,06/12] thermal: qoriq: Pass data to qoriq_tmu_calibration() directly QorIQ TMU multi-sensor and HWMON support - 1 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,05/12] thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly QorIQ TMU multi-sensor and HWMON support 1 - 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,04/12] thermal: qoriq: Drop per-sensor data QorIQ TMU multi-sensor and HWMON support - - 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,03/12] thermal: qoriq: Don't store struct thermal_zone_device reference QorIQ TMU multi-sensor and HWMON support 1 - 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,02/12] thermal: qoriq: Add local struct device pointer QorIQ TMU multi-sensor and HWMON support 1 - 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v5,01/12] thermal: qoriq: Remove unnecessary DT node is NULL check QorIQ TMU multi-sensor and HWMON support 1 - 1 0 0 0 2019-04-24 Andrey Smirnov evalenti New
[v6] arm64: dts: ls1088a: add one more thermal zone node [v6] arm64: dts: ls1088a: add one more thermal zone node - - - 0 0 0 2019-04-23 Andy Tang evalenti New
[v2,74/79] docs: thermal: convert to ReST Untitled series #108577 - - - 0 0 0 2019-04-22 Mauro Carvalho Chehab Zhang Rui New
tools/power turbostat: add Jacobsville support tools/power turbostat: add Jacobsville support - - - 0 0 0 2019-04-21 Zhang Rui lenb New
« 1 2 »