Show patches with: State = Action Required       |    Archived = No       |   958 patches
« 1 2 3 49 10 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
intel_idle: prevent SKX boot failure when C6 & SERIRQ enabled intel_idle: prevent SKX boot failure when C6 & SERIRQ enabled - - - --- 2019-07-01 Stephen Douthit lenb Under Review
[v4,1/7] PM/Domains: Add support for retrieving genpd performance states information Introduce Power domain based warming device driver - 1 - --- 2019-11-20 Thara Gopinath dlezcano Under Review
[v4,2/7] soc: qcom: rpmhpd: Introduce function to retrieve power domain performance state count Introduce Power domain based warming device driver - 1 - --- 2019-11-20 Thara Gopinath dlezcano Under Review
[v4,3/7] thermal: core: Allow cooling devices to register a parent. Introduce Power domain based warming device driver - - - --- 2019-11-20 Thara Gopinath dlezcano Under Review
[v4,4/7] thermal: Add generic power domain warming device driver. Introduce Power domain based warming device driver - - - --- 2019-11-20 Thara Gopinath dlezcano Under Review
[v4,5/7] soc: qcom: Extend RPMh power controller driver to register warming devices. Introduce Power domain based warming device driver - 1 - --- 2019-11-20 Thara Gopinath dlezcano Under Review
[v4,6/7] dt-bindings: soc: qcom: Extend RPMh power controller binding to describe thermal warming d… Introduce Power domain based warming device driver 1 1 - --- 2019-11-20 Thara Gopinath dlezcano Under Review
[v4,7/7] arm64: dts: qcom: Indicate rpmhpd hosts a power domain that can be used as a warming devic… Introduce Power domain based warming device driver - 1 - --- 2019-11-20 Thara Gopinath dlezcano Under Review
[1/3] docs: thermal: Add bind, unbind information together with trip point Thermal extensions for flexibility in cooling device bindings - - - --- 2019-12-16 Lukasz Luba dlezcano Under Review
[2/3] thermal: Make cooling device trip point writable from sysfs Thermal extensions for flexibility in cooling device bindings - - - --- 2019-12-16 Lukasz Luba dlezcano Under Review
[3/3] thermal: Add sysfs binding for cooling device and thermal zone Thermal extensions for flexibility in cooling device bindings - - - --- 2019-12-16 Lukasz Luba dlezcano Under Review
[1/2] thermal: devfreq_cooling: Change license header to SPDX Thermal devfreq cooling small updates - - - --- 2019-12-16 Lukasz Luba dlezcano Under Review
[v2,2/2] ARM: dts: sun8i-r40: Add thermal sensor and thermal zones [v2,1/2] thermal: sun8i: fix r40 ths number - - 1 --- 2020-01-06 Yangtao Li dlezcano Under Review
[RESEND,1/3] PM / devfreq: exynos-nocp: fix debug print type PM / devfreq: change load calc in Exynos5422 - - - --- 2020-01-24 Kamil Konieczny chanwoochoi Under Review
[RESEND,2/3] PM / devfreq: exynos-bus: prepare for change in load calc in exynos-nocp PM / devfreq: change load calc in Exynos5422 - - - --- 2020-01-24 Kamil Konieczny chanwoochoi Under Review
[RESEND,3/3] PM / devfreq: exynos-nocp: change load and total calculations PM / devfreq: change load calc in Exynos5422 - - - --- 2020-01-24 Kamil Konieczny chanwoochoi Under Review
[v7,01/15] PM / EM: change naming convention from 'capacity' to 'performance' Add support for devices in the Energy Model 2 - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,02/15] PM / EM: introduce em_dev_register_perf_domain function Add support for devices in the Energy Model 2 - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,03/15] PM / EM: update callback structure and add device pointer Add support for devices in the Energy Model 1 - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,04/15] PM / EM: add support for other devices than CPUs in Energy Model Add support for devices in the Energy Model - - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,05/15] PM / EM: remove em_register_perf_domain Add support for devices in the Energy Model 2 - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,06/15] PM / EM: change name of em_pd_energy to em_cpu_energy Add support for devices in the Energy Model 2 - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,07/15] Documentation: power: update Energy Model description Add support for devices in the Energy Model 2 - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,08/15] OPP: refactor dev_pm_opp_of_register_em() and update related drivers Add support for devices in the Energy Model 1 - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,09/15] thermal: devfreq_cooling: change tracing function and arguments Add support for devices in the Energy Model - 1 - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,10/15] thermal: devfreq_cooling: get device load and frequency directly Add support for devices in the Energy Model - - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,11/15] thermal: devfreq_cooling: work on a copy of device status Add support for devices in the Energy Model - - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,12/15] thermal: devfreq_cooling: add new registration functions with Energy Model Add support for devices in the Energy Model - - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,13/15] thermal: devfreq_cooling: remove old power model and use EM Add support for devices in the Energy Model - - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,14/15] thermal: devfreq_cooling: update license to use SPDX Add support for devices in the Energy Model - - - --- 2020-05-11 Lukasz Luba dlezcano New
[v7,15/15] drm/panfrost: Register devfreq cooling and attempt to add Energy Model Add support for devices in the Energy Model - 2 - --- 2020-05-11 Lukasz Luba dlezcano New
[v8,01/10] dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings Introduce OPP bandwidth bindings - 2 - --- 2020-05-12 Georgi Djakov vireshk New
[v8,02/10] OPP: Add helpers for reading the binding properties Introduce OPP bandwidth bindings - 2 - --- 2020-05-12 Georgi Djakov vireshk New
[v8,03/10] interconnect: Add of_icc_get_by_index() helper function Introduce OPP bandwidth bindings - 2 - --- 2020-05-12 Georgi Djakov vireshk New
[v8,04/10] OPP: Add support for parsing interconnect bandwidth Introduce OPP bandwidth bindings - 2 - --- 2020-05-12 Georgi Djakov vireshk New
[v8,05/10] OPP: Add sanity checks in _read_opp_key() Introduce OPP bandwidth bindings - 2 - --- 2020-05-12 Georgi Djakov vireshk New
[v8,06/10] OPP: Update the bandwidth on OPP frequency changes Introduce OPP bandwidth bindings - 2 - --- 2020-05-12 Georgi Djakov vireshk New
[v8,07/10] cpufreq: dt: Add support for interconnect bandwidth scaling Introduce OPP bandwidth bindings - 1 - --- 2020-05-12 Georgi Djakov vireshk New
[v8,08/10] cpufreq: dt: Validate all interconnect paths Introduce OPP bandwidth bindings - - - --- 2020-05-12 Georgi Djakov vireshk New
[v8,09/10] dt-bindings: interconnect: Add interconnect-tags bindings Introduce OPP bandwidth bindings - - - --- 2020-05-12 Georgi Djakov vireshk New
[v8,10/10] OPP: Add support for setting interconnect-tags Introduce OPP bandwidth bindings - - - --- 2020-05-12 Georgi Djakov vireshk New
thermal: imx8mm: Add get_trend ops thermal: imx8mm: Add get_trend ops - - - --- 2020-05-13 Anson Huang dlezcano New
[v3] dt-bindings: thermal: rcar-gen3-thermal: Convert bindings to json-schema [v3] dt-bindings: thermal: rcar-gen3-thermal: Convert bindings to json-schema - 1 - --- 2020-05-13 Niklas Söderlund dlezcano New
[v2] thermal: rcar_thermal: Clean up rcar_thermal_update_temp() [v2] thermal: rcar_thermal: Clean up rcar_thermal_update_temp() - 1 - --- 2020-05-14 Niklas Söderlund dlezcano New
[1/2] opp: Reorder the code for !target_freq case opp: core: add regulators enable and disable - - - --- 2020-05-15 Viresh Kumar vireshk New
[2/2] opp: core: add regulators enable and disable opp: core: add regulators enable and disable - - - --- 2020-05-15 Viresh Kumar vireshk New
thermal: rcar_gen3_thermal: Do not shadow thcode variable thermal: rcar_gen3_thermal: Do not shadow thcode variable - 1 - --- 2020-05-15 Niklas Söderlund dlezcano New
[v2,1/2] drivers: thermal: tsens: Add zeroc interrupt support Add zeroc interrupt support to tsens driver - - - --- 2020-05-17 Manaf Meethalavalappu Pallikunhi dlezcano New
[v2,2/2] dt-bindings: thermal: tsens: Add zeroc interrupt support in yaml Add zeroc interrupt support to tsens driver - 1 - --- 2020-05-17 Manaf Meethalavalappu Pallikunhi dlezcano New
opp: Expose bandwidth information via debugfs opp: Expose bandwidth information via debugfs - - - --- 2020-05-18 Viresh Kumar vireshk New
[V4] dt-bindings: thermal: Convert i.MX to json-schema [V4] dt-bindings: thermal: Convert i.MX to json-schema - 1 - --- 2020-05-20 Anson Huang dlezcano New
[v3,1/2] drivers: thermal: tsens: Add cold interrupt support Add cold interrupt support to tsens driver - - - --- 2020-05-22 Manaf Meethalavalappu Pallikunhi dlezcano New
[v3,2/2] dt-bindings: thermal: tsens: Add cold interrupt support in yaml Add cold interrupt support to tsens driver - 1 - --- 2020-05-22 Manaf Meethalavalappu Pallikunhi dlezcano New
thermal: sprd: Fix return value of sprd_thm_probe() thermal: sprd: Fix return value of sprd_thm_probe() - 2 - --- 2020-05-25 Tiezhu Yang dlezcano New
[v4] thermal: qoriq: Update the settings for TMUv2 [v4] thermal: qoriq: Update the settings for TMUv2 - - - --- 2020-05-26 Andy Tang dlezcano New
[V2] opp: Remove bandwidth votes when target_freq is zero [V2] opp: Remove bandwidth votes when target_freq is zero - 2 2 --- 2020-05-27 Viresh Kumar vireshk New
OPP: Check for bandwidth values before creating icc paths OPP: Check for bandwidth values before creating icc paths - 1 1 --- 2020-05-27 Sibi Sankar vireshk New
[v5,1/5] cpufreq: blacklist SDM845 in cpufreq-dt-platdev DDR/L3 Scaling support on SDM845 and SC7180 SoCs - 2 - --- 2020-05-27 Sibi Sankar vireshk New
[v5,2/5] cpufreq: blacklist SC7180 in cpufreq-dt-platdev DDR/L3 Scaling support on SDM845 and SC7180 SoCs - 2 - --- 2020-05-27 Sibi Sankar vireshk New
[v5,3/5] OPP: Add and export helper to set bandwidth DDR/L3 Scaling support on SDM845 and SC7180 SoCs - - - --- 2020-05-27 Sibi Sankar vireshk New
[v5,4/5] cpufreq: qcom: Update the bandwidth levels on frequency change DDR/L3 Scaling support on SDM845 and SC7180 SoCs - - - --- 2020-05-27 Sibi Sankar vireshk New
[v5,5/5] cpufreq: qcom: Disable fast switch when scaling DDR/L3 DDR/L3 Scaling support on SDM845 and SC7180 SoCs - - - --- 2020-05-27 Sibi Sankar vireshk New
[1/3] cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command() brcmstb-avs-cpufreq updates 1 - - --- 2020-05-28 Markus Mayer vireshk New
[2/3] cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware brcmstb-avs-cpufreq updates - - - --- 2020-05-28 Markus Mayer vireshk New
[3/3] cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVS brcmstb-avs-cpufreq updates 1 - - --- 2020-05-28 Markus Mayer vireshk New
dt-bindings: thermal: Convert qoriq to json-schema dt-bindings: thermal: Convert qoriq to json-schema - - - --- 2020-05-29 Anson Huang dlezcano New
cpuidle/firmware: qcom: fix smcc dependencies cpuidle/firmware: qcom: fix smcc dependencies 1 - - --- 2020-05-29 Arnd Bergmann dlezcano New
opp: avoid uninitialized-variable use opp: avoid uninitialized-variable use - - - --- 2020-05-29 Arnd Bergmann vireshk New
[V2] dt-bindings: thermal: Convert qoriq to json-schema [V2] dt-bindings: thermal: Convert qoriq to json-schema - - - --- 2020-06-01 Anson Huang dlezcano New
[V4] dt-bindings: thermal: Convert qoriq to json-schema [V4] dt-bindings: thermal: Convert qoriq to json-schema - - - --- 2020-06-02 Anson Huang dlezcano New
MAINTAINERS: Add maintenance information for IPA MAINTAINERS: Add maintenance information for IPA - - - --- 2020-06-03 Lukasz Luba dlezcano New
[V5] dt-bindings: thermal: Convert qoriq to json-schema [V5] dt-bindings: thermal: Convert qoriq to json-schema - - - --- 2020-06-04 Anson Huang dlezcano New
[v6,1/5] cpufreq: blacklist SDM845 in cpufreq-dt-platdev DDR/L3 Scaling support on SDM845 and SC7180 SoCs - 2 - --- 2020-06-05 Sibi Sankar vireshk New
[v6,2/5] cpufreq: blacklist SC7180 in cpufreq-dt-platdev DDR/L3 Scaling support on SDM845 and SC7180 SoCs - 2 - --- 2020-06-05 Sibi Sankar vireshk New
[v6,3/5] OPP: Add and export helper to set bandwidth DDR/L3 Scaling support on SDM845 and SC7180 SoCs - 1 - --- 2020-06-05 Sibi Sankar vireshk New
[v6,4/5] cpufreq: qcom: Update the bandwidth levels on frequency change DDR/L3 Scaling support on SDM845 and SC7180 SoCs - - - --- 2020-06-05 Sibi Sankar vireshk New
[v6,5/5] cpufreq: qcom: Disable fast switch when scaling DDR/L3 DDR/L3 Scaling support on SDM845 and SC7180 SoCs - 1 - --- 2020-06-05 Sibi Sankar vireshk New
thermal: rcar_gen3_thermal: Fix undefined temperature if negative thermal: rcar_gen3_thermal: Fix undefined temperature if negative - - - --- 2020-06-08 Yoshihiro Shimoda dlezcano New
[1/3] dt-bindings: thermal: qcom-tsens: Add compatible for sm8150, sm8250 Add thermal support for SM8150, SM8250 1 - - --- 2020-06-09 Amit Kucheria dlezcano New
[3/3] arm64: dts: qcom: sm8250: Add thermal zones and throttling support Add thermal support for SM8150, SM8250 - - 1 --- 2020-06-09 Amit Kucheria dlezcano New
[v2] thermal: rcar_gen3_thermal: Fix undefined temperature if negative [v2] thermal: rcar_gen3_thermal: Fix undefined temperature if negative - 1 1 --- 2020-06-09 Yoshihiro Shimoda dlezcano New
[v2] thermal: rcar_gen3_thermal: Do not shadow thcode variable [v2] thermal: rcar_gen3_thermal: Do not shadow thcode variable - 1 - --- 2020-06-10 Niklas Söderlund dlezcano New
[02/22] docs: thermal: convert cpu-idle-cooling.rst to ReST Untitled series #302593 - - - --- 2020-06-15 Mauro Carvalho Chehab dlezcano New
thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() - - - --- 2020-06-16 Dan Carpenter dlezcano New
[-next] opp: export dev_pm_opp_adjust_voltage [-next] opp: export dev_pm_opp_adjust_voltage - - - --- 2020-06-17 Jack Qiu vireshk New
thermal: imx8mm: Support module autoloading thermal: imx8mm: Support module autoloading - 1 - --- 2020-06-17 Anson Huang dlezcano New
[v4,1/2] thermal: add support for the MCU controlled FAN on Khadas boards mfd: Add support for Khadas Microcontroller 1 1 - --- 2020-06-18 Neil Armstrong dlezcano New
[v4,2/2] arm64: dts: meson-khadas-vim3: add Khadas MCU nodes mfd: Add support for Khadas Microcontroller - 1 - --- 2020-06-18 Neil Armstrong dlezcano New
thermal/drivers/cpufreq_cooling: Fix wrong frequency converted from power thermal/drivers/cpufreq_cooling: Fix wrong frequency converted from power 1 1 - --- 2020-06-19 Finley Xiao dlezcano New
dt-bindings: thermal: rcar-thermal: Improve schema validation dt-bindings: thermal: rcar-thermal: Improve schema validation - 3 - --- 2020-06-19 Geert Uytterhoeven dlezcano New
cpufreq: dt: fix oops on armada37xx cpufreq: dt: fix oops on armada37xx - 1 - --- 2020-06-20 Ivan Kokshaysky vireshk New
opp: core: Add missing export to core.c opp: core: Add missing export to core.c - - - --- 2020-06-20 Valdis Kl ē tnieks vireshk New
[TEGRA194_CPUFREQ,v3,1/4] dt-bindings: arm: Add t194 ccplex compatible and bpmp property Add cpufreq driver for Tegra194 - - - --- 2020-06-21 Sumit Gupta vireshk New
[TEGRA194_CPUFREQ,v3,2/4] arm64: tegra: Add t194 ccplex compatible and bpmp property Add cpufreq driver for Tegra194 - - - --- 2020-06-21 Sumit Gupta vireshk New
[TEGRA194_CPUFREQ,v3,3/4] cpufreq: Add Tegra194 cpufreq driver Add cpufreq driver for Tegra194 - - - --- 2020-06-21 Sumit Gupta vireshk New
[TEGRA194_CPUFREQ,v3,4/4] arm64: defconfig: Enable CONFIG_ARM_TEGRA194_CPUFREQ Add cpufreq driver for Tegra194 - - - --- 2020-06-21 Sumit Gupta vireshk New
[v6,1/5] cpufreq: blacklist SDM845 in cpufreq-dt-platdev DDR/L3 Scaling support on SDM845 and SC7180 SoCs - 2 - --- 2020-06-22 Sibi Sankar vireshk New
[v6,2/5] cpufreq: blacklist SC7180 in cpufreq-dt-platdev DDR/L3 Scaling support on SDM845 and SC7180 SoCs - 2 - --- 2020-06-22 Sibi Sankar vireshk New
[v6,3/5] OPP: Add and export helper to set bandwidth DDR/L3 Scaling support on SDM845 and SC7180 SoCs - 1 - --- 2020-06-22 Sibi Sankar vireshk New
[v6,4/5] cpufreq: qcom: Update the bandwidth levels on frequency change DDR/L3 Scaling support on SDM845 and SC7180 SoCs - 1 - --- 2020-06-22 Sibi Sankar vireshk New
« 1 2 3 49 10 »