Show patches with: State = Action Required       |    Archived = No       |   288 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,1/3] PM / Suspend: Add support to check if platform's power is off in suspend add support for power off check in suspend - - - 0 0 0 2019-01-08 Claudiu Beznea New
[v2,2/3] regulator: core: add helper to check if regulator is disabled in suspend add support for power off check in suspend - - - 0 0 0 2019-01-08 Claudiu Beznea New
[v2,3/3] ARM: at91: pm: add support for .off_in_suspend add support for power off check in suspend - - - 0 0 0 2019-01-08 Claudiu Beznea New
[v4,1/2] cpufreq: Add sunxi nvmem based CPU scaling driver cpufreq: Add sunxi nvmem based CPU scaling driver 1 - - 0 0 0 2019-04-16 Frank Lee vireshk New
[v4,2/2] dt-bindings: cpufreq: Document allwinner,sun50i-h6-operating-points cpufreq: Add sunxi nvmem based CPU scaling driver 1 - - 0 0 0 2019-04-16 Frank Lee vireshk New
[v2] cpufreq: imx6q: Fix the resource leak caused by incorrect error return [v2] cpufreq: imx6q: Fix the resource leak caused by incorrect error return 1 1 - 0 0 0 2019-05-05 Jacky Bai vireshk New
[1/2] opp: Attach genpds to devices from within OPP core [1/2] opp: Attach genpds to devices from within OPP core - - 1 0 0 0 2019-05-13 Viresh Kumar vireshk New
[2/2] opp: Allocate genpd_virt_devs from dev_pm_opp_attach_genpd() [1/2] opp: Attach genpds to devices from within OPP core - - 1 0 0 0 2019-05-13 Viresh Kumar vireshk New
[1/2] cpufreq: brcmstb-avs-cpufreq: Fix initial command check cpufreq: brcmstb-avs-cpufreq: Couple fixes - - - 0 0 0 2019-05-22 Florian Fainelli vireshk Under Review
[2/2] cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency cpufreq: brcmstb-avs-cpufreq: Couple fixes - - - 0 0 0 2019-05-22 Florian Fainelli vireshk Under Review
[-next] cpufreq: armada-37xx: Remove set but not used variable 'freq' [-next] cpufreq: armada-37xx: Remove set but not used variable 'freq' - - - 0 0 0 2019-06-01 YueHaibing vireshk New
[RESEND,v4,1/2] cpufreq: Add sun50i nvmem based CPU scaling driver cpufreq: Add sunxi nvmem based CPU scaling driver 1 - - 0 0 0 2019-06-12 Frank Lee vireshk New
[RESEND,v4,2/2] dt-bindings: cpufreq: Document allwinner,sun50i-h6-operating-points cpufreq: Add sunxi nvmem based CPU scaling driver 1 1 - 0 0 0 2019-06-12 Frank Lee vireshk New
[v4,1/7] clk: bcm2835: remove pllb cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,2/7] clk: bcm283x: add driver interfacing with Raspberry Pi's firmware cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,3/7] firmware: raspberrypi: register clk device cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,4/7] cpufreq: add driver for Raspberry Pi cpufreq support for Raspberry Pi 1 1 - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,5/7] clk: raspberrypi: register platform device for raspberrypi-cpufreq cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,6/7] ARM: defconfig: enable cpufreq driver for RPi cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[v4,7/7] arm64: defconfig: enable cpufreq support for RPi3 cpufreq support for Raspberry Pi 1 - - 0 0 0 2019-06-12 Nicolas Saenz Julienne vireshk New
[RESEND,v2] cpufreq: s5pv210: Don't flood kernel log after cpufreq change [RESEND,v2] cpufreq: s5pv210: Don't flood kernel log after cpufreq change 1 - - 0 0 0 2019-06-21 Paweł Chmiel vireshk New
intel_idle: prevent SKX boot failure when C6 & SERIRQ enabled intel_idle: prevent SKX boot failure when C6 & SERIRQ enabled - - - 0 0 0 2019-07-01 Stephen Douthit lenb Under Review
[1/2] opp: Export dev_pm_opp_set_genpd_virt_dev() [1/2] opp: Export dev_pm_opp_set_genpd_virt_dev() - - - 0 0 0 2019-07-02 Rajendra Nayak vireshk New
[2/2] opp: Manage empty OPP tables with clk handle [1/2] opp: Export dev_pm_opp_set_genpd_virt_dev() - - - 0 0 0 2019-07-02 Rajendra Nayak vireshk New
opp: Don't decrement uninitialized list_kref opp: Don't decrement uninitialized list_kref - - - 0 0 0 2019-07-03 Viresh Kumar vireshk New
opp: Return genpd virtual devices from dev_pm_opp_attach_genpd() opp: Return genpd virtual devices from dev_pm_opp_attach_genpd() - - - 0 0 0 2019-07-08 Viresh Kumar vireshk New
[V2,1/4] dt-bindings: opp: Support multiple opp-suspend properties [V2,1/4] dt-bindings: opp: Support multiple opp-suspend properties - 1 - 0 0 0 2019-07-09 Anson Huang vireshk New
[V2,2/4] opp: of: Support multiple suspend OPPs defined in DT [V2,1/4] dt-bindings: opp: Support multiple opp-suspend properties - - - 0 0 0 2019-07-09 Anson Huang vireshk New
[V2,3/4] arm64: dts: imx8mq: Add opp-suspend property to OPP table [V2,1/4] dt-bindings: opp: Support multiple opp-suspend properties - - - 0 0 0 2019-07-09 Anson Huang vireshk New
[V2,4/4] arm64: dts: imx8mm: Add opp-suspend property to OPP table [V2,1/4] dt-bindings: opp: Support multiple opp-suspend properties - - - 0 0 0 2019-07-09 Anson Huang vireshk New
[v2,1/4] opp: core: add regulators enable and disable [v2,1/4] opp: core: add regulators enable and disable - 1 - 0 0 0 2019-07-15 Kamil Konieczny vireshk New
[v2,2/4] devfreq: exynos-bus: convert to use dev_pm_opp_set_rate() [v2,1/4] opp: core: add regulators enable and disable - - - 0 0 0 2019-07-15 Kamil Konieczny vireshk New
[v2,3/4] ARM: dts: exynos: add initial data for coupled regulators for Exynos5422/5800 [v2,1/4] opp: core: add regulators enable and disable - 1 - 0 0 0 2019-07-15 Kamil Konieczny vireshk New
[1/2] opp: Not all power-domains are scalable [1/2] opp: Not all power-domains are scalable - - 1 0 0 0 2019-07-17 Viresh Kumar vireshk New
[V2,2/2] opp: Return genpd virtual devices from dev_pm_opp_attach_genpd() [1/2] opp: Not all power-domains are scalable - - 1 0 0 0 2019-07-17 Viresh Kumar vireshk New
cpufreq: ap806: Add NULL check after kcalloc cpufreq: ap806: Add NULL check after kcalloc - - - 0 0 0 2019-07-21 Hariprasad Kelam vireshk New
[v4,1/5] OPP: Allow required-opps even if the device doesn't have power-domains Add required-opps support to devfreq passive gov - - - 0 0 0 2019-07-24 Saravana Kannan vireshk New
[v4,2/5] OPP: Add function to look up required OPP's for a given OPP Add required-opps support to devfreq passive gov - - - 0 0 0 2019-07-24 Saravana Kannan vireshk New
[v4,3/5] OPP: Improve required-opps linking Add required-opps support to devfreq passive gov - - - 0 0 0 2019-07-24 Saravana Kannan vireshk New
[v4,4/5] PM / devfreq: Cache OPP table reference in devfreq Add required-opps support to devfreq passive gov 1 1 - 0 0 0 2019-07-24 Saravana Kannan vireshk New
[v4,5/5] PM / devfreq: Add required OPPs support to passive governor Add required-opps support to devfreq passive gov 2 - - 0 0 0 2019-07-24 Saravana Kannan vireshk New
PM / OPP: Correct Documentation about library location PM / OPP: Correct Documentation about library location - - - 0 0 0 2019-07-26 Yue Hu vireshk New
[v4,1/3] dt-bindings: opp: Introduce opp-peak-KBps and opp-avg-KBps bindings Introduce Bandwidth OPPs for interconnects - - - 0 0 0 2019-07-26 Saravana Kannan vireshk New
[v4,2/3] OPP: Add support for bandwidth OPP tables Introduce Bandwidth OPPs for interconnects - - - 0 0 0 2019-07-26 Saravana Kannan vireshk New
[v4,3/3] OPP: Add helper function for bandwidth OPP tables Introduce Bandwidth OPPs for interconnects - - - 0 0 0 2019-07-26 Saravana Kannan vireshk New
cpufreq: ti-cpufreq: Mark expected switch fall-through cpufreq: ti-cpufreq: Mark expected switch fall-through - - - 0 0 0 2019-07-29 Gustavo A. R. Silva vireshk New
cpufreq: mediatek-cpufreq: Add compatible for MT8516 cpufreq: mediatek-cpufreq: Add compatible for MT8516 - - - 0 0 0 2019-08-06 Fabien Parent vireshk New
cpufreq: qcom-hw: Update logic to detect turbo frequency cpufreq: qcom-hw: Update logic to detect turbo frequency - - - 0 0 0 2019-08-07 Sibi Sankar vireshk New
[v5,1/3] dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings Introduce Bandwidth OPPs for interconnects - 1 - 0 0 0 2019-08-07 Saravana Kannan vireshk New
[v5,2/3] OPP: Add support for bandwidth OPP tables Introduce Bandwidth OPPs for interconnects - - - 0 0 0 2019-08-07 Saravana Kannan vireshk New
[v5,3/3] OPP: Add helper function for bandwidth OPP tables Introduce Bandwidth OPPs for interconnects - - - 0 0 0 2019-08-07 Saravana Kannan vireshk New
[1/2] cpufreq: drivers: Enable frequency invariance in qcom-cpufreq-hw [1/2] cpufreq: drivers: Enable frequency invariance in qcom-cpufreq-hw - 1 - 0 0 0 2019-08-08 Douglas Raillard vireshk New
[RESEND,V2,1/7] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support [RESEND,V2,1/7] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support - - - 0 0 0 2019-08-18 Anson Huang vireshk New
[RESEND,V2,2/7] arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support [RESEND,V2,1/7] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support - - - 0 0 0 2019-08-18 Anson Huang vireshk New
[RESEND,V2,3/7] cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading [RESEND,V2,1/7] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support - - - 0 0 0 2019-08-18 Anson Huang vireshk New
[RESEND,V2,4/7] cpufreq: imx-cpufreq-dt: Add i.MX8MN support [RESEND,V2,1/7] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support - - - 0 0 0 2019-08-18 Anson Huang vireshk New
[RESEND,V2,5/7] clk: imx8mn: Add missing rate_count assignment for each PLL structure [RESEND,V2,1/7] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support - - - 0 0 0 2019-08-18 Anson Huang vireshk New
[RESEND,V2,6/7] clk: imx8mn: Add necessary frequency support for ARM PLL table [RESEND,V2,1/7] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support - - - 0 0 0 2019-08-18 Anson Huang vireshk New
[RESEND,V2,7/7] arm64: dts: imx8mn: Add cpu-freq support [RESEND,V2,1/7] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support - - - 0 0 0 2019-08-18 Anson Huang vireshk New
[-next] cpufreq: qcom-hw: remove set but not used variable 'prev_cc' [-next] cpufreq: qcom-hw: remove set but not used variable 'prev_cc' - - - 0 0 0 2019-08-21 YueHaibing vireshk New
thermal: make thermal_zone_of_sensor_register return -ENODEV if a sensor OF node is missing thermal: make thermal_zone_of_sensor_register return -ENODEV if a sensor OF node is missing - - - 0 0 0 2019-08-27 Peter Mamonov dlezcano New
[1/4] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits - 1 - 0 0 0 2019-09-07 H. Nikolaus Schaller vireshk New
[2/4] ARM: dts: replace opp-v1 tables by opp-v2 for omap34xx and omap36xx OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits 1 - 1 0 0 0 2019-09-07 H. Nikolaus Schaller vireshk New
[3/4] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,... OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits 1 1 - 0 0 0 2019-09-07 H. Nikolaus Schaller vireshk New
[4/4] DTS: bindings: omap: update bindings documentation OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits 2 - - 0 0 0 2019-09-07 H. Nikolaus Schaller vireshk New
[1/2] cpufreq: ti-cpufreq: Add support for AM3517 [1/2] cpufreq: ti-cpufreq: Add support for AM3517 - - - 0 0 0 2019-09-09 Adam Ford vireshk New
[2/2] ARM: dts: Add OPP-V2 table for AM3517 [1/2] cpufreq: ti-cpufreq: Add support for AM3517 - - - 0 0 0 2019-09-09 Adam Ford vireshk New
[v3,1/8] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits - 1 1 0 0 0 2019-09-11 H. Nikolaus Schaller vireshk New
[v3,2/8] ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 for OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits 1 - - 0 0 0 2019-09-11 H. Nikolaus Schaller vireshk New
[v3,3/8] DTS: bindings: omap: update bindings documentation OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits 1 - - 0 0 0 2019-09-11 H. Nikolaus Schaller vireshk New
[v3,4/8] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ... OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits 1 - - 0 0 0 2019-09-11 H. Nikolaus Schaller vireshk New
[v3,5/8] cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits 2 - - 0 0 0 2019-09-11 H. Nikolaus Schaller vireshk New
[v3,6/8] ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits 1 - - 0 0 0 2019-09-11 H. Nikolaus Schaller vireshk New
[v3,7/8] cpufreq: ti-cpufreq: Add support for AM3517 OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits 1 - 1 0 0 0 2019-09-11 H. Nikolaus Schaller vireshk New
[v3,8/8] ARM: dts: Add OPP-V2 table for AM3517 OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits 1 - 1 0 0 0 2019-09-11 H. Nikolaus Schaller vireshk New
thermal: st: Use devm_platform_ioremap_resource() in st_mmap_regmap_init() thermal: st: Use devm_platform_ioremap_resource() in st_mmap_regmap_init() - 1 - 0 0 0 2019-09-18 Markus Elfring Zhang Rui New
[1/4] dt-bindings: thermal: Introduce monitor-falling parameter to thermal trip point binding thermal: Introduce support for monitoring falling temperatures. - - - 0 0 0 2019-09-19 Thara Gopinath Zhang Rui New
[2/4] thermal: Thermal core and sysfs changes needed to support bi-directional monitoring of trip... thermal: Introduce support for monitoring falling temperatures. - - - 0 0 0 2019-09-19 Thara Gopinath Zhang Rui New
[3/4] thermal: of-thermal: Extend thermal dt driver to support bi-directional monitoring of a the... thermal: Introduce support for monitoring falling temperatures. - - - 0 0 0 2019-09-19 Thara Gopinath Zhang Rui New
[4/4] thermal: step_wise: Extend thermal step-wise governor to monitor falling temperature. thermal: Introduce support for monitoring falling temperatures. - - - 0 0 0 2019-09-19 Thara Gopinath Zhang Rui New
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t - - - 0 0 0 2019-10-08 Sebastian Andrzej Siewior Zhang Rui New
opp: of: drop incorrect lockdep_assert_held() opp: of: drop incorrect lockdep_assert_held() - - 1 0 0 0 2019-10-10 Viresh Kumar vireshk New
thermal: create softlink by name for thermal_zone and cooling_device thermal: create softlink by name for thermal_zone and cooling_device - - - 0 0 0 2019-10-15 Wei Wang Zhang Rui New
thermal: stm32: make stm_thermal_pm_ops static thermal: stm32: make stm_thermal_pm_ops static - 1 - 0 0 0 2019-10-15 Ben Dooks Zhang Rui New
thermal: update header and documentation thermal: update header and documentation - - - 0 0 0 2019-10-16 Wei Wang Zhang Rui New
opp: core: Revert "add regulators enable and disable" opp: core: Revert "add regulators enable and disable" - 1 - 0 0 0 2019-10-17 Marek Szyprowski vireshk New
opp: Reinitialize the list_kref before adding the static OPPs again opp: Reinitialize the list_kref before adding the static OPPs again - - 1 0 0 0 2019-10-18 Viresh Kumar vireshk New
[v3,1/5] cpufreq: scpi: remove stale/outdated comment about the driver cpufreq: merge arm big.LITTLE and vexpress-spc drivers 1 - - 0 0 0 2019-10-18 Sudeep Holla vireshk New
[v3,2/5] cpufreq: merge arm_big_little and vexpress-spc cpufreq: merge arm big.LITTLE and vexpress-spc drivers 1 - - 0 0 0 2019-10-18 Sudeep Holla vireshk New
[v3,3/5] cpufreq: vexpress-spc: drop unnessary cpufreq_arm_bL_ops abstraction cpufreq: merge arm big.LITTLE and vexpress-spc drivers 1 - - 0 0 0 2019-10-18 Sudeep Holla vireshk New
[v3,4/5] cpufreq: vexpress-spc: remove lots of debug messages cpufreq: merge arm big.LITTLE and vexpress-spc drivers 1 - - 0 0 0 2019-10-18 Sudeep Holla vireshk New
[v3,5/5] cpufreq: vexpress-spc: fix some coding style issues cpufreq: merge arm big.LITTLE and vexpress-spc drivers 1 - - 0 0 0 2019-10-18 Sudeep Holla vireshk New
[RESEND,v3,2/5] cpufreq: merge arm_big_little and vexpress-spc Untitled series #190761 1 - - 0 0 0 2019-10-21 Sudeep Holla vireshk New
[V2] cpufreq: imx-cpufreq-dt: Correct i.MX8MN's default speed grade value [V2] cpufreq: imx-cpufreq-dt: Correct i.MX8MN's default speed grade value - - - 0 0 0 2019-10-22 Anson Huang vireshk New
cpufreq: s3c64xx: Remove pointless NULL check in s3c64xx_cpufreq_driver_init cpufreq: s3c64xx: Remove pointless NULL check in s3c64xx_cpufreq_driver_init - - - 0 0 0 2019-10-23 Nathan Chancellor vireshk New
cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag - - - 0 0 0 2019-10-23 Mian Yousaf Kaukab vireshk New
[1/2] cpufreq: vexpress-spc: use macros instead of hardcoded values for cluster ids [1/2] cpufreq: vexpress-spc: use macros instead of hardcoded values for cluster ids - - - 0 0 0 2019-10-23 Sudeep Holla vireshk New
[2/2] cpufreq: vexpress-spc: find and skip duplicates when merging frequencies [1/2] cpufreq: vexpress-spc: use macros instead of hardcoded values for cluster ids - - - 0 0 0 2019-10-23 Sudeep Holla vireshk New
[v2,2/2] cpufreq: vexpress-spc: find and skip duplicates when merging frequencies Untitled series #192195 - - - 0 0 0 2019-10-23 Sudeep Holla vireshk New
thermal: no need to set .owner when using module_platform_driver thermal: no need to set .owner when using module_platform_driver 1 - - 0 0 0 2019-10-26 tiantao (H) Zhang Rui New
« 1 2 3 »