Show patches with: State = Action Required       |    Archived = No       |   953 patches
« 1 2 ... 3 4 5 … 9 10 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v6,2/9] thermal: exynos: drop id field [v6,1/9] thermal: exynos: remove an unnecessary field description - 1 - --- 2023-12-01 Mateusz Majewski dlezcano New
[v6,1/9] thermal: exynos: remove an unnecessary field description [v6,1/9] thermal: exynos: remove an unnecessary field description - 1 - --- 2023-12-01 Mateusz Majewski dlezcano New
[v2] thermal: k3_j72xx_bandgap: implement suspend/resume support [v2] thermal: k3_j72xx_bandgap: implement suspend/resume support 1 - - --- 2023-11-30 Thomas Richard dlezcano New
[v12,4/4] thermal: thermal_of: Allow rebooting after critical temp [v12,1/4] dt-bindings: thermal-zones: Document critical-action - - - --- 2023-11-29 Fabio Estevam dlezcano New
[v12,3/4] reboot: Introduce thermal_zone_device_critical_reboot() [v12,1/4] dt-bindings: thermal-zones: Document critical-action - - - --- 2023-11-29 Fabio Estevam dlezcano New
[v12,2/4] thermal_core: Prepare for introduction of thermal reboot [v12,1/4] dt-bindings: thermal-zones: Document critical-action - - - --- 2023-11-29 Fabio Estevam dlezcano New
[v12,1/4] dt-bindings: thermal-zones: Document critical-action [v12,1/4] dt-bindings: thermal-zones: Document critical-action - 1 - --- 2023-11-29 Fabio Estevam dlezcano New
thermal: k3_j72xx_bandgap: implement suspend/resume support thermal: k3_j72xx_bandgap: implement suspend/resume support - - - --- 2023-11-28 Thomas Richard dlezcano New
[v3] dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor [v3] dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor - 1 - --- 2023-11-28 Neil Armstrong dlezcano New
OPP: Check for invalid OPP in dev_pm_opp_find_level_ceil() OPP: Check for invalid OPP in dev_pm_opp_find_level_ceil() - - - --- 2023-11-28 Viresh Kumar vireshk New
[v3,6/6] arm64: dts: allwinner: h616: Add thermal sensor and zones Add support for H616 Thermal system - - - --- 2023-11-28 Andre Przywara dlezcano New
[v3,5/6] thermal: sun8i: add support for H616 THS controller Add support for H616 Thermal system - - - --- 2023-11-28 Andre Przywara dlezcano New
[v3,4/6] thermal: sun8i: add syscon register access code Add support for H616 Thermal system - - - --- 2023-11-28 Andre Przywara dlezcano New
[v3,3/6] thermal: sun8i: explain unknown H6 register value Add support for H616 Thermal system - - - --- 2023-11-28 Andre Przywara dlezcano New
[v3,2/6] dt-bindings: thermal: sun8i: Add H616 THS controller Add support for H616 Thermal system - - - --- 2023-11-28 Andre Przywara dlezcano New
[v3,1/6] soc: sunxi: sram: export register 0 for THS on H616 Add support for H616 Thermal system - - - --- 2023-11-28 Andre Przywara dlezcano New
[v4] PM / devfreq: Synchronize device_monitor_[start/stop] [v4] PM / devfreq: Synchronize device_monitor_[start/stop] - - - --- 2023-11-24 Mukesh Ojha chanwoochoi New
[v2,2/2] drivers/thermal/loongson2_thermal: Fix incorrect PTR_ERR() judgment loongson2_thermal: Fix some issues - - - --- 2023-11-24 Binbin Zhou dlezcano New
[v2,1/2] dt-bindings: thermal: loongson,ls2k-thermal: Fix binding check issues loongson2_thermal: Fix some issues - 1 - --- 2023-11-24 Binbin Zhou dlezcano New
[V2] cpufreq: imx6q: Only disabling 792MHz OPP for i.MX6ULL types below 792MHz [V2] cpufreq: imx6q: Only disabling 792MHz OPP for i.MX6ULL types below 792MHz - 2 - --- 2023-11-22 Christoph Niedermaier vireshk New
[v5,9/9] thermal: exynos: use set_trips [v5,1/9] thermal: exynos: remove an unnecessary field description - 1 - --- 2023-11-20 Mateusz Majewski dlezcano New
[v5,8/9] thermal: exynos: use BIT wherever possible [v5,1/9] thermal: exynos: remove an unnecessary field description - - - --- 2023-11-20 Mateusz Majewski dlezcano New
[v5,7/9] thermal: exynos: split initialization of TMU and the thermal zone [v5,1/9] thermal: exynos: remove an unnecessary field description - 1 - --- 2023-11-20 Mateusz Majewski dlezcano New
[v5,6/9] thermal: exynos: stop using the threshold mechanism on Exynos 4210 [v5,1/9] thermal: exynos: remove an unnecessary field description - 1 - --- 2023-11-20 Mateusz Majewski dlezcano New
[v5,5/9] thermal: exynos: simplify regulator (de)initialization [v5,1/9] thermal: exynos: remove an unnecessary field description - 1 - --- 2023-11-20 Mateusz Majewski dlezcano New
[v5,4/9] thermal: exynos: handle devm_regulator_get_optional return value correctly [v5,1/9] thermal: exynos: remove an unnecessary field description - 1 - --- 2023-11-20 Mateusz Majewski dlezcano New
[v5,3/9] thermal: exynos: switch from workqueue-driven interrupt handling to threaded interrupts [v5,1/9] thermal: exynos: remove an unnecessary field description - 1 - --- 2023-11-20 Mateusz Majewski dlezcano New
[v5,2/9] thermal: exynos: drop id field [v5,1/9] thermal: exynos: remove an unnecessary field description - 1 - --- 2023-11-20 Mateusz Majewski dlezcano New
[v5,1/9] thermal: exynos: remove an unnecessary field description [v5,1/9] thermal: exynos: remove an unnecessary field description - 1 - --- 2023-11-20 Mateusz Majewski dlezcano New
[v11,4/4] thermal: thermal_of: Allow rebooting after critical temp [v11,1/4] dt-bindings: thermal-zones: Document critical-action - - - --- 2023-11-19 Fabio Estevam dlezcano New
[v11,3/4] reboot: Introduce thermal_zone_device_critical_reboot() [v11,1/4] dt-bindings: thermal-zones: Document critical-action - - - --- 2023-11-19 Fabio Estevam dlezcano New
[v11,2/4] thermal_core: Prepare for introduction of thermal reboot [v11,1/4] dt-bindings: thermal-zones: Document critical-action - - - --- 2023-11-19 Fabio Estevam dlezcano New
[v11,1/4] dt-bindings: thermal-zones: Document critical-action [v11,1/4] dt-bindings: thermal-zones: Document critical-action - 1 - --- 2023-11-19 Fabio Estevam dlezcano New
[v3] PM / devfreq: Synchronize device_monitor_[start/stop] [v3] PM / devfreq: Synchronize device_monitor_[start/stop] - - - --- 2023-11-17 Mukesh Ojha chanwoochoi New
cpufreq: scmi: process the result of devm_of_clk_add_hw_provider() cpufreq: scmi: process the result of devm_of_clk_add_hw_provider() - - - --- 2023-11-17 Alexandra Diupina vireshk New
[V3] dt-bindings: thermal: convert Mediatek Thermal to the json-schema [V3] dt-bindings: thermal: convert Mediatek Thermal to the json-schema - 2 - --- 2023-11-17 Rafał Miłecki dlezcano New
[V2] dt-bindings: thermal: convert Mediatek Thermal to the json-schema [V2] dt-bindings: thermal: convert Mediatek Thermal to the json-schema - - - --- 2023-11-16 Rafał Miłecki dlezcano New
[2/2] thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions thermal: amlogic: Two cleanups - - - --- 2023-11-16 Uwe Kleine-König dlezcano New
[1/2] thermal: amlogic: Make amlogic_thermal_disable() return void thermal: amlogic: Two cleanups - - - --- 2023-11-16 Uwe Kleine-König dlezcano New
[V3,3/3] OPP: Don't set OPP recursively for a parent genpd OPP: Simplify required-opp handling - 1 - --- 2023-11-16 Viresh Kumar vireshk New
[V3,2/3] OPP: Call dev_pm_opp_set_opp() for required OPPs OPP: Simplify required-opp handling - 1 - --- 2023-11-16 Viresh Kumar vireshk New
[V3,1/3] OPP: Use _set_opp_level() for single genpd case OPP: Simplify required-opp handling - 1 - --- 2023-11-16 Viresh Kumar vireshk New
[RESEND] thermal: loongson2: Replace of_device.h with explicit includes [RESEND] thermal: loongson2: Replace of_device.h with explicit includes - - - --- 2023-11-15 Rob Herring (Arm) dlezcano New
[v2] thermal: Add support for device tree thermal zones consumers [v2] thermal: Add support for device tree thermal zones consumers - - - --- 2023-11-15 AngeloGioacchino Del Regno dlezcano New
PM / devfreq: Synchronize queuing the same timer instance twice PM / devfreq: Synchronize queuing the same timer instance twice - - - --- 2023-11-14 Mukesh Ojha chanwoochoi New
[v3,2/3] cpufreq: qcom-nvmem: Preserve PM domain votes in system suspend cpufreq: qcom-nvmem: Fix power domain scaling - 1 - --- 2023-11-14 Stephan Gerhold vireshk New
[v3,1/3] cpufreq: qcom-nvmem: Enable virtual power domain devices cpufreq: qcom-nvmem: Fix power domain scaling - 1 - --- 2023-11-14 Stephan Gerhold vireshk New
Various Exynos targets never return to no cooling Various Exynos targets never return to no cooling - - - --- 2023-11-13 Mateusz Majewski dlezcano New
Performance: devfreq: avoid devfreq delay work re-init before Performance: devfreq: avoid devfreq delay work re-init before - - - --- 2023-11-10 黄再漾(Joyyoung Huang) chanwoochoi New
cpufreq: imx6q: Only disabling 792MHz OPP for i.MX6ULL types below 792MHz cpufreq: imx6q: Only disabling 792MHz OPP for i.MX6ULL types below 792MHz - 2 - --- 2023-11-07 Christoph Niedermaier vireshk New
cpufreq: intel_pstate: Fix CPU lowest Frequency bug when offline/online for passive cpufreq: intel_pstate: Fix CPU lowest Frequency bug when offline/online for passive - - - --- 2023-11-07 Jinjie Ruan rafael New
Performance: devfreq: avoid devfreq delay work re-init before queue, which will cause delayed work … Performance: devfreq: avoid devfreq delay work re-init before queue, which will cause delayed work … - - - --- 2023-11-04 黄再漾(Joyyoung Huang) chanwoochoi New
[v2] driver: thermal: simplify the traverse of sensor in thermal_zone. [v2] driver: thermal: simplify the traverse of sensor in thermal_zone. - - - --- 2023-11-02 xinglong.yang dlezcano New
[v2] opp: ti: Use device_get_match_data() [v2] opp: ti: Use device_get_match_data() - - - --- 2023-11-01 Rob Herring (Arm) vireshk New
[2/2] drivers/thermal/loongson2_thermal: Fix incorrect PTR_ERR() judgment [1/2] dt-bindings: thermal: loongson,ls2k-thermal: Fix binding check issues - - - --- 2023-10-31 Binbin Zhou dlezcano New
[1/2] dt-bindings: thermal: loongson,ls2k-thermal: Fix binding check issues [1/2] dt-bindings: thermal: loongson,ls2k-thermal: Fix binding check issues - 1 - --- 2023-10-31 Binbin Zhou dlezcano New
[v6,2/2] cpufreq: qti: Introduce cpufreq for ipq95xx Enable cpufreq for IPQ5332 & IPQ9574 - 1 - --- 2023-10-31 Varadarajan Narayanan vireshk New
[v6,1/2] cpufreq: qti: Enable cpufreq for ipq53xx Enable cpufreq for IPQ5332 & IPQ9574 - 2 - --- 2023-10-31 Varadarajan Narayanan vireshk New
[RESEND] opp: ti: Use device_get_match_data() [RESEND] opp: ti: Use device_get_match_data() - - - --- 2023-10-30 Rob Herring (Arm) vireshk New
[RESEND] thermal: loongson2: Replace of_device.h with explicit includes [RESEND] thermal: loongson2: Replace of_device.h with explicit includes - - - --- 2023-10-30 Rob Herring (Arm) dlezcano New
[V2,3/3] OPP: Call dev_pm_opp_set_opp() for required OPPs OPP: Simplify required-opp handling - 1 - --- 2023-10-30 Viresh Kumar vireshk New
[V2,2/3] OPP: Use _set_opp_level() for single genpd case OPP: Simplify required-opp handling - 1 - --- 2023-10-30 Viresh Kumar vireshk New
[V2,1/3] OPP: Level zero is valid OPP: Simplify required-opp handling - 1 - --- 2023-10-30 Viresh Kumar vireshk New
[v2] dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware [v2] dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware - - - --- 2023-10-25 Neil Armstrong vireshk New
[v2] dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor [v2] dt-bindings: thermal: qcom-tsens: document the SM8650 Temperature Sensor - 1 - --- 2023-10-25 Neil Armstrong dlezcano New
PM/sleep: Instrument start of filesystems sync PM/sleep: Instrument start of filesystems sync - - - --- 2023-10-24 Kalesh Singh New
[1/1] cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT [1/1] cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT - - - --- 2023-10-23 Alexander Stein vireshk New
thermal/drivers/qoriq: fix getting tmu range thermal/drivers/qoriq: fix getting tmu range - - 1 --- 2023-10-20 Peng Fan (OSS) dlezcano New
[v5,9/9] arm64: dts: qcom: ipq9574: populate the opp table based on the eFuse Enable cpufreq for IPQ5332 & IPQ9574 - 1 - --- 2023-10-20 Varadarajan Narayanan vireshk New
[v5,8/9] cpufreq: qti: Introduce cpufreq for ipq95xx Enable cpufreq for IPQ5332 & IPQ9574 - 1 - --- 2023-10-20 Varadarajan Narayanan vireshk New
[v5,7/9] arm64: dts: qcom: ipq5332: populate the opp table based on the eFuse Enable cpufreq for IPQ5332 & IPQ9574 - - - --- 2023-10-20 Varadarajan Narayanan vireshk New
[v5,6/9] cpufreq: qti: Enable cpufreq for ipq53xx Enable cpufreq for IPQ5332 & IPQ9574 - 2 - --- 2023-10-20 Varadarajan Narayanan vireshk New
[v5,5/9] clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll Enable cpufreq for IPQ5332 & IPQ9574 1 1 - --- 2023-10-20 Varadarajan Narayanan vireshk New
[v5,4/9] clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config Enable cpufreq for IPQ5332 & IPQ9574 - 2 - --- 2023-10-20 Varadarajan Narayanan vireshk New
[v5,3/9] clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll Enable cpufreq for IPQ5332 & IPQ9574 1 2 - --- 2023-10-20 Varadarajan Narayanan vireshk New
[v5,2/9] clk: qcom: clk-alpha-pll: introduce stromer plus ops Enable cpufreq for IPQ5332 & IPQ9574 - 1 - --- 2023-10-20 Varadarajan Narayanan vireshk New
[v5,1/9] clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEM Enable cpufreq for IPQ5332 & IPQ9574 - 1 - --- 2023-10-20 Varadarajan Narayanan vireshk New
thermal/qcom/tsens: drop ops_v0_1 thermal/qcom/tsens: drop ops_v0_1 - - - --- 2023-10-19 Dmitry Baryshkov dlezcano New
[v7,4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table cpufreq: qcom-nvmem: add support for ipq806x - - - --- 2023-10-19 Christian Marangi vireshk New
[v7,3/4] cpufreq: qcom-nvmem: add support for IPQ8064 cpufreq: qcom-nvmem: add support for ipq806x - - - --- 2023-10-19 Christian Marangi vireshk New
[v7,2/4] cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu cpufreq: qcom-nvmem: add support for ipq806x - 1 - --- 2023-10-19 Christian Marangi vireshk New
[v7,1/4] cpufreq: qcom-nvmem: drop pvs_ver for format a fuses cpufreq: qcom-nvmem: add support for ipq806x - 1 - --- 2023-10-19 Christian Marangi vireshk New
[2/2] OPP: Call dev_pm_opp_set_opp() for required OPPs OPP: Simplify required-opp handling - 1 - --- 2023-10-19 Viresh Kumar vireshk New
[1/2] OPP: Use _set_opp_level() for single genpd case OPP: Simplify required-opp handling - 1 - --- 2023-10-19 Viresh Kumar vireshk New
[v2,3/3] cpufreq: qcom-nvmem: Add MSM8909 cpufreq: Add basic cpufreq scaling for Qualcomm MSM8909 1 1 - --- 2023-10-18 Stephan Gerhold vireshk New
[v2,2/3] cpufreq: qcom-nvmem: Enable virtual power domain devices cpufreq: Add basic cpufreq scaling for Qualcomm MSM8909 - - - --- 2023-10-18 Stephan Gerhold vireshk New
[v2,1/3] cpufreq: qcom-nvmem: Simplify driver data allocation cpufreq: Add basic cpufreq scaling for Qualcomm MSM8909 - 1 - --- 2023-10-18 Stephan Gerhold vireshk New
[v5,5/5] thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation Add LVTS support for mt8192 - 3 - --- 2023-10-17 Bernhard Rosenkränzer dlezcano New
[v5,4/5] arm64: dts: mediatek: mt8192: Add thermal nodes and thermal zones Add LVTS support for mt8192 - 3 - --- 2023-10-17 Bernhard Rosenkränzer dlezcano New
[v5,3/5] thermal/drivers/mediatek/lvts_thermal: Add mt8192 support Add LVTS support for mt8192 - 4 - --- 2023-10-17 Bernhard Rosenkränzer dlezcano New
[v5,2/5] thermal/drivers/mediatek/lvts_thermal: Add suspend and resume Add LVTS support for mt8192 - 3 - --- 2023-10-17 Bernhard Rosenkränzer dlezcano New
[v5,1/5] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192 Add LVTS support for mt8192 1 3 - --- 2023-10-17 Bernhard Rosenkränzer dlezcano New
[next] thermal: lvts: make some read-only arrays static const [next] thermal: lvts: make some read-only arrays static const - - - --- 2023-10-17 Colin Ian King dlezcano New
[3/3] arm64: dts: qcom: ipq6018: use CPUFreq NVMEM [1/3] dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018 - 1 - --- 2023-10-16 Robert Marko vireshk New
[2/3] cpufreq: qcom-nvmem: add support for IPQ6018 [1/3] dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018 - - - --- 2023-10-16 Robert Marko vireshk New
[1/3] dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018 [1/3] dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018 - - - --- 2023-10-16 Robert Marko vireshk New
[v6,4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table cpufreq: qcom-nvmem: add support for ipq806x - - - --- 2023-10-13 Christian Marangi vireshk New
[v6,3/4] cpufreq: qcom-nvmem: add support for IPQ8064 cpufreq: qcom-nvmem: add support for ipq806x - 1 - --- 2023-10-13 Christian Marangi vireshk New
[v6,2/4] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property cpufreq: qcom-nvmem: add support for ipq806x - 1 - --- 2023-10-13 Christian Marangi vireshk New
[v6,1/4] dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu cpufreq: qcom-nvmem: add support for ipq806x 1 - - --- 2023-10-13 Christian Marangi vireshk New
« 1 2 ... 3 4 5 … 9 10 »