diff mbox series

[v11,1/2] thermal: Add thermal driver for Sunplus

Message ID 076585e120b64832dcb81e39f3e59d719148816b.1665990345.git.lhjeff911@gmail.com (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series Add thermal control driver for Sunplus SoC | expand

Commit Message

Li-hao Kuo Oct. 18, 2022, 7:32 a.m. UTC
Add thermal driver for Sunplus.

Signed-off-by: Li-hao Kuo <lhjeff911@gmail.com>
---
Changes in v11:
 - Remove the remove function of the platform_driver
 - Fix error reported-by: kernel test robot.

 MAINTAINERS                       |   6 ++
 drivers/thermal/Kconfig           |  10 +++
 drivers/thermal/Makefile          |   1 +
 drivers/thermal/sunplus_thermal.c | 130 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 147 insertions(+)
 create mode 100644 drivers/thermal/sunplus_thermal.c

Comments

Daniel Lezcano Oct. 22, 2022, 4:35 p.m. UTC | #1
On 18/10/2022 09:32, Li-hao Kuo wrote:
> Add thermal driver for Sunplus.
> 
> Signed-off-by: Li-hao Kuo <lhjeff911@gmail.com>
> ---
> Changes in v11:
>   - Remove the remove function of the platform_driver
>   - Fix error reported-by: kernel test robot.
> 
>   MAINTAINERS                       |   6 ++
>   drivers/thermal/Kconfig           |  10 +++
>   drivers/thermal/Makefile          |   1 +
>   drivers/thermal/sunplus_thermal.c | 130 ++++++++++++++++++++++++++++++++++++++
>   4 files changed, 147 insertions(+)
>   create mode 100644 drivers/thermal/sunplus_thermal.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index cf0f185..bf22c53 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19753,6 +19753,12 @@ S:	Maintained
>   F:	Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
>   F:	drivers/spi/spi-sunplus-sp7021.c
>   
> +SUNPLUS THERMAL DRIVER
> +M:	Li-hao Kuo <lhjeff911@gmail.com>
> +L:	linux-pm@vger.kernel.org
> +S:	Maintained
> +F:	drivers/thermal/sunplus_thermal.c
> +
>   SUNPLUS UART DRIVER
>   M:	Hammer Hsieh <hammerh0314@gmail.com>
>   S:	Maintained
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index e052dae..405b788 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -504,4 +504,14 @@ config KHADAS_MCU_FAN_THERMAL
>   	  If you say yes here you get support for the FAN controlled
>   	  by the Microcontroller found on the Khadas VIM boards.
>   
> +config SUNPLUS_THERMAL
> +	tristate "Sunplus thermal drivers"
> +	depends on SOC_SP7021 || COMPILE_TEST
> +	help
> +	  This enable the Sunplus SP7021 thermal driver, which supports the primitive
> +	  temperature sensor embedded in Sunplus SP7021 SoC.
> +
> +	  If you have a Sunplus SP7021 platform say Y here and enable this option
> +	  to have support for thermal management.
> +
>   endif
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 2506c6c..4512193 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -61,3 +61,4 @@ obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
>   obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
>   obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
>   obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o
> +obj-$(CONFIG_SUNPLUS_THERMAL)	+= sunplus_thermal.o
> \ No newline at end of file
> diff --git a/drivers/thermal/sunplus_thermal.c b/drivers/thermal/sunplus_thermal.c
> new file mode 100644
> index 0000000..20ea7d9
> --- /dev/null
> +++ b/drivers/thermal/sunplus_thermal.c
> @@ -0,0 +1,130 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) Sunplus Inc.
> + * Author: Li-hao Kuo <lhjeff911@gmail.com>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/thermal.h>
> +
> +#define ENABLE_THERMAL		BIT(31)
> +#define SP_THERMAL_MASK		GENMASK(10, 0)
> +
> +#define TEMP_RATE		608
> +#define TEMP_BASE		3500
> +#define TEMP_OTP_BASE		1518
> +
> +#define SP_THERMAL_CTL0_REG	0x0000
> +#define SP_THERMAL_STS0_REG	0x0030
> +
> +/* common data structures */
> +struct sp_thermal_data {
> +	struct thermal_zone_device *pcb_tz;
> +	void __iomem *regs;
> +	int *otp_temp0;
> +};
> +
> +static int sunplus_get_otp_temp_coef(struct sp_thermal_data *sp_data, struct device *dev)
> +{
> +	struct nvmem_cell *cell;
> +	ssize_t otp_l;
> +
> +	cell = nvmem_cell_get(dev, "calib");
> +	if (IS_ERR(cell))
> +		return PTR_ERR(cell);
> +
> +	sp_data->otp_temp0 = nvmem_cell_read(cell, &otp_l);
> +	nvmem_cell_put(cell);
> +
> +	if (*sp_data->otp_temp0 == 0)
> +		*sp_data->otp_temp0 = TEMP_OTP_BASE;
> +
> +	return 0;
> +}
> +
> +/*
> + * There is a thermal sensor instance for Sunplus Soc
> + * T_CODE is the ADC of the thermal sensor
> + * T_CODE : 11 digits in total
> + * When remanufacturing, the 35 degree T_CODE will be read and stored in nvcell.
> + * otp_temp0 is the 35 degree T_CODE obtained from nvcell
> + * The function will get 35 degree T_CODE for thermal calibration.
> + * TEMP_RATE is the Sunplus thermal temperature slope.
> + */
> +
> +static int sp_thermal_get_sensor_temp(void *data, int *temp)
> +{
> +	struct sp_thermal_data *sp_data = data;
> +	int t_code;
> +
> +	t_code = readl(sp_data->regs + SP_THERMAL_STS0_REG);
> +	t_code = FIELD_GET(SP_THERMAL_MASK, t_code);
> +	*temp = ((*sp_data->otp_temp0 - t_code) * 10000 / TEMP_RATE) + TEMP_BASE;
> +	*temp *= 10;
> +	return 0;
> +}
> +
> +static const struct thermal_zone_of_device_ops sp_of_thermal_ops = {

struct thermal_zone_device_ops ...

 
https://lore.kernel.org/r/20220804224349.1926752-1-daniel.lezcano@linexp.org
Lh Kuo 郭力豪 Nov. 7, 2022, 1:18 a.m. UTC | #2
Thank you  I will fix it in next next submission

> -----Original Message-----
> From: Daniel Lezcano <daniel.lezcano@linaro.org>
> Sent: Sunday, October 23, 2022 12:36 AM
> To: Li-hao Kuo <lhjeff911@gmail.com>; krzk@kernel.org; rafael@kernel.org; amitk@kernel.org;
> rui.zhang@intel.com; robh+dt@kernel.org; linux-pm@vger.kernel.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org
> Cc: Lh Kuo 郭力豪 <lh.Kuo@sunplus.com>
> Subject: Re: [PATCH v11 1/2] thermal: Add thermal driver for Sunplus
> 
> On 18/10/2022 09:32, Li-hao Kuo wrote:
> > Add thermal driver for Sunplus.
> >
> > Signed-off-by: Li-hao Kuo <lhjeff911@gmail.com>
> > ---
> > Changes in v11:
> >   - Remove the remove function of the platform_driver
> >   - Fix error reported-by: kernel test robot.
> >
> >   MAINTAINERS                       |   6 ++
> >   drivers/thermal/Kconfig           |  10 +++
> >   drivers/thermal/Makefile          |   1 +
> >   drivers/thermal/sunplus_thermal.c | 130 ++++++++++++++++++++++++++++++++++++++
> >   4 files changed, 147 insertions(+)
> >   create mode 100644 drivers/thermal/sunplus_thermal.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS index cf0f185..bf22c53 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -19753,6 +19753,12 @@ S:	Maintained
> >   F:	Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
> >   F:	drivers/spi/spi-sunplus-sp7021.c
> >
> > +SUNPLUS THERMAL DRIVER
> > +M:	Li-hao Kuo <lhjeff911@gmail.com>
> > +L:	linux-pm@vger.kernel.org
> > +S:	Maintained
> > +F:	drivers/thermal/sunplus_thermal.c
> > +
> >   SUNPLUS UART DRIVER
> >   M:	Hammer Hsieh <hammerh0314@gmail.com>
> >   S:	Maintained
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index
> > e052dae..405b788 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -504,4 +504,14 @@ config KHADAS_MCU_FAN_THERMAL
> >   	  If you say yes here you get support for the FAN controlled
> >   	  by the Microcontroller found on the Khadas VIM boards.
> >
> > +config SUNPLUS_THERMAL
> > +	tristate "Sunplus thermal drivers"
> > +	depends on SOC_SP7021 || COMPILE_TEST
> > +	help
> > +	  This enable the Sunplus SP7021 thermal driver, which supports the primitive
> > +	  temperature sensor embedded in Sunplus SP7021 SoC.
> > +
> > +	  If you have a Sunplus SP7021 platform say Y here and enable this option
> > +	  to have support for thermal management.
> > +
> >   endif
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index
> > 2506c6c..4512193 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -61,3 +61,4 @@ obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
> >   obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> >   obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
> >   obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o
> > +obj-$(CONFIG_SUNPLUS_THERMAL)	+= sunplus_thermal.o
> > \ No newline at end of file
> > diff --git a/drivers/thermal/sunplus_thermal.c
> > b/drivers/thermal/sunplus_thermal.c
> > new file mode 100644
> > index 0000000..20ea7d9
> > --- /dev/null
> > +++ b/drivers/thermal/sunplus_thermal.c
> > @@ -0,0 +1,130 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (c) Sunplus Inc.
> > + * Author: Li-hao Kuo <lhjeff911@gmail.com>  */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/reset.h>
> > +#include <linux/thermal.h>
> > +
> > +#define ENABLE_THERMAL		BIT(31)
> > +#define SP_THERMAL_MASK		GENMASK(10, 0)
> > +
> > +#define TEMP_RATE		608
> > +#define TEMP_BASE		3500
> > +#define TEMP_OTP_BASE		1518
> > +
> > +#define SP_THERMAL_CTL0_REG	0x0000
> > +#define SP_THERMAL_STS0_REG	0x0030
> > +
> > +/* common data structures */
> > +struct sp_thermal_data {
> > +	struct thermal_zone_device *pcb_tz;
> > +	void __iomem *regs;
> > +	int *otp_temp0;
> > +};
> > +
> > +static int sunplus_get_otp_temp_coef(struct sp_thermal_data *sp_data,
> > +struct device *dev) {
> > +	struct nvmem_cell *cell;
> > +	ssize_t otp_l;
> > +
> > +	cell = nvmem_cell_get(dev, "calib");
> > +	if (IS_ERR(cell))
> > +		return PTR_ERR(cell);
> > +
> > +	sp_data->otp_temp0 = nvmem_cell_read(cell, &otp_l);
> > +	nvmem_cell_put(cell);
> > +
> > +	if (*sp_data->otp_temp0 == 0)
> > +		*sp_data->otp_temp0 = TEMP_OTP_BASE;
> > +
> > +	return 0;
> > +}
> > +
> > +/*
> > + * There is a thermal sensor instance for Sunplus Soc
> > + * T_CODE is the ADC of the thermal sensor
> > + * T_CODE : 11 digits in total
> > + * When remanufacturing, the 35 degree T_CODE will be read and stored in nvcell.
> > + * otp_temp0 is the 35 degree T_CODE obtained from nvcell
> > + * The function will get 35 degree T_CODE for thermal calibration.
> > + * TEMP_RATE is the Sunplus thermal temperature slope.
> > + */
> > +
> > +static int sp_thermal_get_sensor_temp(void *data, int *temp) {
> > +	struct sp_thermal_data *sp_data = data;
> > +	int t_code;
> > +
> > +	t_code = readl(sp_data->regs + SP_THERMAL_STS0_REG);
> > +	t_code = FIELD_GET(SP_THERMAL_MASK, t_code);
> > +	*temp = ((*sp_data->otp_temp0 - t_code) * 10000 / TEMP_RATE) + TEMP_BASE;
> > +	*temp *= 10;
> > +	return 0;
> > +}
> > +
> > +static const struct thermal_zone_of_device_ops sp_of_thermal_ops = {
> 
> struct thermal_zone_device_ops ...
> 
> 
> https://lore.kernel.org/r/20220804224349.1926752-1-daniel.lezcano@linexp.org
> 
> 
> 
> 
> 
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
> 
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg>
> Twitter | <http://www.linaro.org/linaro-blog/> Blog
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index cf0f185..bf22c53 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19753,6 +19753,12 @@  S:	Maintained
 F:	Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
 F:	drivers/spi/spi-sunplus-sp7021.c
 
+SUNPLUS THERMAL DRIVER
+M:	Li-hao Kuo <lhjeff911@gmail.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	drivers/thermal/sunplus_thermal.c
+
 SUNPLUS UART DRIVER
 M:	Hammer Hsieh <hammerh0314@gmail.com>
 S:	Maintained
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index e052dae..405b788 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -504,4 +504,14 @@  config KHADAS_MCU_FAN_THERMAL
 	  If you say yes here you get support for the FAN controlled
 	  by the Microcontroller found on the Khadas VIM boards.
 
+config SUNPLUS_THERMAL
+	tristate "Sunplus thermal drivers"
+	depends on SOC_SP7021 || COMPILE_TEST
+	help
+	  This enable the Sunplus SP7021 thermal driver, which supports the primitive
+	  temperature sensor embedded in Sunplus SP7021 SoC.
+
+	  If you have a Sunplus SP7021 platform say Y here and enable this option
+	  to have support for thermal management.
+
 endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 2506c6c..4512193 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -61,3 +61,4 @@  obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
 obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
 obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
 obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o
+obj-$(CONFIG_SUNPLUS_THERMAL)	+= sunplus_thermal.o
\ No newline at end of file
diff --git a/drivers/thermal/sunplus_thermal.c b/drivers/thermal/sunplus_thermal.c
new file mode 100644
index 0000000..20ea7d9
--- /dev/null
+++ b/drivers/thermal/sunplus_thermal.c
@@ -0,0 +1,130 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Sunplus Inc.
+ * Author: Li-hao Kuo <lhjeff911@gmail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+
+#define ENABLE_THERMAL		BIT(31)
+#define SP_THERMAL_MASK		GENMASK(10, 0)
+
+#define TEMP_RATE		608
+#define TEMP_BASE		3500
+#define TEMP_OTP_BASE		1518
+
+#define SP_THERMAL_CTL0_REG	0x0000
+#define SP_THERMAL_STS0_REG	0x0030
+
+/* common data structures */
+struct sp_thermal_data {
+	struct thermal_zone_device *pcb_tz;
+	void __iomem *regs;
+	int *otp_temp0;
+};
+
+static int sunplus_get_otp_temp_coef(struct sp_thermal_data *sp_data, struct device *dev)
+{
+	struct nvmem_cell *cell;
+	ssize_t otp_l;
+
+	cell = nvmem_cell_get(dev, "calib");
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	sp_data->otp_temp0 = nvmem_cell_read(cell, &otp_l);
+	nvmem_cell_put(cell);
+
+	if (*sp_data->otp_temp0 == 0)
+		*sp_data->otp_temp0 = TEMP_OTP_BASE;
+
+	return 0;
+}
+
+/*
+ * There is a thermal sensor instance for Sunplus Soc
+ * T_CODE is the ADC of the thermal sensor
+ * T_CODE : 11 digits in total
+ * When remanufacturing, the 35 degree T_CODE will be read and stored in nvcell.
+ * otp_temp0 is the 35 degree T_CODE obtained from nvcell
+ * The function will get 35 degree T_CODE for thermal calibration.
+ * TEMP_RATE is the Sunplus thermal temperature slope.
+ */
+
+static int sp_thermal_get_sensor_temp(void *data, int *temp)
+{
+	struct sp_thermal_data *sp_data = data;
+	int t_code;
+
+	t_code = readl(sp_data->regs + SP_THERMAL_STS0_REG);
+	t_code = FIELD_GET(SP_THERMAL_MASK, t_code);
+	*temp = ((*sp_data->otp_temp0 - t_code) * 10000 / TEMP_RATE) + TEMP_BASE;
+	*temp *= 10;
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops sp_of_thermal_ops = {
+	.get_temp = sp_thermal_get_sensor_temp,
+};
+
+static int sunplus_thermal_probe(struct platform_device *pdev)
+{
+	struct sp_thermal_data *sp_data;
+	int ret;
+
+	sp_data = devm_kzalloc(&pdev->dev, sizeof(*sp_data), GFP_KERNEL);
+	if (!sp_data)
+		return -ENOMEM;
+
+	sp_data->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(sp_data->regs)) {
+		dev_err(&pdev->dev, "resource get fail\n");
+		return PTR_ERR(sp_data->regs);
+	}
+
+	writel(ENABLE_THERMAL, sp_data->regs + SP_THERMAL_CTL0_REG);
+
+	platform_set_drvdata(pdev, sp_data);
+	ret = sunplus_get_otp_temp_coef(sp_data, &pdev->dev);
+	if (ret)
+		return ret;
+
+	sp_data->pcb_tz = devm_thermal_zone_of_sensor_register(&pdev->dev,
+							    0,
+							    sp_data, &sp_of_thermal_ops);
+
+	if (IS_ERR(sp_data->pcb_tz)) {
+		ret = PTR_ERR(sp_data->pcb_tz);
+		dev_err(&pdev->dev, "failed to register tsensor: %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static const struct of_device_id of_sunplus_thermal_ids[] = {
+	{ .compatible = "sunplus,sp7021-thermal" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_sunplus_thermal_ids);
+
+static struct platform_driver sunplus_thermal_driver = {
+	.probe	= sunplus_thermal_probe,
+	.driver	= {
+		.name	= "sunplus-thermal",
+		.of_match_table = of_sunplus_thermal_ids,
+		},
+};
+module_platform_driver(sunplus_thermal_driver);
+
+MODULE_AUTHOR("Li-hao Kuo <lhjeff911@gmail.com>");
+MODULE_DESCRIPTION("Thermal driver for Sunplus SoC");
+MODULE_LICENSE("GPL");