| Message ID | 0d1c6b3e06c3195a87d72ca5ec8456748af463ca.1421957474.git.todd.e.brandt@linux.intel.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Thu, Jan 22, 2015 at 12:52:06PM -0800, Todd Brandt wrote: > Register definitions and platform data structure > for fuel gauge cell devices. > > Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> > --- > include/linux/mfd/axp20x.h | 43 +++++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 41 insertions(+), 2 deletions(-) > > v2: same as v1 and is already accepted, re-included for continuity > > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h > index 81589d1..dfabd6d 100644 > --- a/include/linux/mfd/axp20x.h > +++ b/include/linux/mfd/axp20x.h > @@ -124,10 +124,27 @@ enum { > #define AXP288_PMIC_ADC_H 0x56 > #define AXP288_PMIC_ADC_L 0x57 > #define AXP288_ADC_TS_PIN_CTRL 0x84 > - > #define AXP288_PMIC_ADC_EN 0x84 > -#define AXP288_FG_TUNE5 0xed > > +/* Fuel Gauge */ > +#define AXP288_FG_RDC1_REG 0xba > +#define AXP288_FG_RDC0_REG 0xbb > +#define AXP288_FG_OCVH_REG 0xbc > +#define AXP288_FG_OCVL_REG 0xbd > +#define AXP288_FG_OCV_CURVE_REG 0xc0 > +#define AXP288_FG_DES_CAP1_REG 0xe0 > +#define AXP288_FG_DES_CAP0_REG 0xe1 > +#define AXP288_FG_CC_MTR1_REG 0xe2 > +#define AXP288_FG_CC_MTR0_REG 0xe3 > +#define AXP288_FG_OCV_CAP_REG 0xe4 > +#define AXP288_FG_CC_CAP_REG 0xe5 > +#define AXP288_FG_LOW_CAP_REG 0xe6 > +#define AXP288_FG_TUNE0 0xe8 > +#define AXP288_FG_TUNE1 0xe9 > +#define AXP288_FG_TUNE2 0xea > +#define AXP288_FG_TUNE3 0xeb > +#define AXP288_FG_TUNE4 0xec > +#define AXP288_FG_TUNE5 0xed > > /* Regulators IDs */ > enum { > @@ -236,4 +253,26 @@ struct axp20x_dev { > const struct regmap_irq_chip *regmap_irq_chip; > }; > > +#define BATTID_LEN 64 > +#define OCV_CURVE_SIZE 32 > +#define MAX_THERM_CURVE_SIZE 25 > +#define PD_DEF_MIN_TEMP 0 > +#define PD_DEF_MAX_TEMP 55 > + > +struct axp20x_fg_pdata { > + char battid[BATTID_LEN + 1]; > + int design_cap; > + int min_volt; > + int max_volt; > + int max_temp; > + int min_temp; > + int cap1; > + int cap0; > + int rdc1; > + int rdc0; > + int ocv_curve[OCV_CURVE_SIZE]; > + int tcsz; > + int thermistor_curve[MAX_THERM_CURVE_SIZE][2]; > +}; Acked-By: Sebastian Reichel <sre@kernel.org> -- Sebastian
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index 81589d1..dfabd6d 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -124,10 +124,27 @@ enum { #define AXP288_PMIC_ADC_H 0x56 #define AXP288_PMIC_ADC_L 0x57 #define AXP288_ADC_TS_PIN_CTRL 0x84 - #define AXP288_PMIC_ADC_EN 0x84 -#define AXP288_FG_TUNE5 0xed +/* Fuel Gauge */ +#define AXP288_FG_RDC1_REG 0xba +#define AXP288_FG_RDC0_REG 0xbb +#define AXP288_FG_OCVH_REG 0xbc +#define AXP288_FG_OCVL_REG 0xbd +#define AXP288_FG_OCV_CURVE_REG 0xc0 +#define AXP288_FG_DES_CAP1_REG 0xe0 +#define AXP288_FG_DES_CAP0_REG 0xe1 +#define AXP288_FG_CC_MTR1_REG 0xe2 +#define AXP288_FG_CC_MTR0_REG 0xe3 +#define AXP288_FG_OCV_CAP_REG 0xe4 +#define AXP288_FG_CC_CAP_REG 0xe5 +#define AXP288_FG_LOW_CAP_REG 0xe6 +#define AXP288_FG_TUNE0 0xe8 +#define AXP288_FG_TUNE1 0xe9 +#define AXP288_FG_TUNE2 0xea +#define AXP288_FG_TUNE3 0xeb +#define AXP288_FG_TUNE4 0xec +#define AXP288_FG_TUNE5 0xed /* Regulators IDs */ enum { @@ -236,4 +253,26 @@ struct axp20x_dev { const struct regmap_irq_chip *regmap_irq_chip; }; +#define BATTID_LEN 64 +#define OCV_CURVE_SIZE 32 +#define MAX_THERM_CURVE_SIZE 25 +#define PD_DEF_MIN_TEMP 0 +#define PD_DEF_MAX_TEMP 55 + +struct axp20x_fg_pdata { + char battid[BATTID_LEN + 1]; + int design_cap; + int min_volt; + int max_volt; + int max_temp; + int min_temp; + int cap1; + int cap0; + int rdc1; + int rdc0; + int ocv_curve[OCV_CURVE_SIZE]; + int tcsz; + int thermistor_curve[MAX_THERM_CURVE_SIZE][2]; +}; + #endif /* __LINUX_MFD_AXP20X_H */
Register definitions and platform data structure for fuel gauge cell devices. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> --- include/linux/mfd/axp20x.h | 43 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 2 deletions(-) v2: same as v1 and is already accepted, re-included for continuity