Message ID | 1342679480-5336-15-git-send-email-rui.zhang@intel.com (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
On Thursday, July 19, 2012, Zhang Rui wrote: > This fixes the problem that a cooling device may be referenced by > by multiple trip points in multiple thermal zones. > > With this patch, we have two stages for updating a thermal zone, > 1. check if a thermal_instance needs to be updated or not > 2. update the cooling device, based on the target cooling state > of all its instances. > > Note that, currently, the cooling device is set to the deepest > cooling state required. > > Signed-off-by: Zhang Rui <rui.zhang@intel.com> > --- > drivers/thermal/thermal_sys.c | 41 ++++++++++++++++++++++++++++++++++++++--- > include/linux/thermal.h | 1 + > 2 files changed, 39 insertions(+), 3 deletions(-) > > diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c > index 48b2668..803ce94 100644 > --- a/drivers/thermal/thermal_sys.c > +++ b/drivers/thermal/thermal_sys.c > @@ -54,6 +54,7 @@ struct thermal_instance { > int trip; > unsigned long upper; /* Highest cooling state for this trip point */ > unsigned long lower; /* Lowest cooling state for this trip point */ > + unsigned long target; /* expected cooling state */ > char attr_name[THERMAL_NAME_LENGTH]; > struct device_attribute attr; > struct list_head tz_node; /* node in tz->instances */ > @@ -853,6 +854,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, > dev->trip = trip; > dev->upper = upper; > dev->lower = lower; > + dev->target = -1; Please define THERMAL_NO_TARGET and use that instead of plain -1. > > result = get_idr(&tz->idr, &tz->lock, &dev->id); > if (result) > @@ -990,6 +992,7 @@ thermal_cooling_device_register(char *type, void *devdata, > strcpy(cdev->type, type); > INIT_LIST_HEAD(&cdev->instances); > cdev->ops = ops; > + cdev->updated = 1; > cdev->device.class = &thermal_class; > cdev->devdata = devdata; > dev_set_name(&cdev->device, "cooling_device%d", cdev->id); > @@ -1081,6 +1084,32 @@ void thermal_cooling_device_unregister(struct > } > EXPORT_SYMBOL(thermal_cooling_device_unregister); > > +static void thermal_zone_do_update(struct thermal_zone_device *tz) > +{ > + struct thermal_instance *instance1, *instance2; > + struct thermal_cooling_device *cdev; > + int target; The 'target' field in the structure is unsigned long. It'd be better to use the same data type here. It would be good to use 'true' and 'false' as the values of 'updated' too. > + > + list_for_each_entry(instance1, &tz->instances, tz_node) { > + cdev = instance1->cdev; > + > + /* cooling device has already been updated*/ > + if (cdev->updated) > + continue; > + > + target = 0; > + /* Make sure cdev enters the deepest cooling state */ > + list_for_each_entry(instance2, &cdev->instances, cdev_node) { > + if (instance2->target == -1) > + continue; > + if (instance2->target > target) > + target = instance2->target; > + } > + cdev->ops->set_cur_state(cdev, target); > + cdev->updated = 1; > + } > +} I would split the function above into two, one that would walk all instances of the thermal zone and the other, that would walk the instances for a given device. It would look much cleaner, then. > + > /* > * Cooling algorithm for active trip points > * > @@ -1127,19 +1156,24 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, > cur_state = cur_state > instance->lower ? > (cur_state - 1) : instance->lower; > } > - cdev->ops->set_cur_state(cdev, cur_state); > + instance->target = cur_state; > + cdev->updated = 0; /* cooling device needs update */ > } > } else { /* below trip */ > list_for_each_entry(instance, &tz->instances, tz_node) { > if (instance->trip != trip) > continue; > > + /* Do not use the deacitve thermal instance */ > + if (instance->target == -1) > + continue; > cdev = instance->cdev; > cdev->ops->get_cur_state(cdev, &cur_state); > > cur_state = cur_state > instance->lower ? > - (cur_state - 1) : instance->lower; > - cdev->ops->set_cur_state(cdev, cur_state); > + (cur_state - 1) : -1; > + instance->target = cur_state; > + cdev->updated = 0; /* cooling device needs update */ > } > } > > @@ -1200,6 +1234,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) > } > } > > + thermal_zone_do_update(tz); > if (tz->forced_passive) > thermal_zone_device_passive(tz, temp, tz->forced_passive, > THERMAL_TRIPS_NONE); > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > index d8e069e..604c0f0 100644 > --- a/include/linux/thermal.h > +++ b/include/linux/thermal.h > @@ -92,6 +92,7 @@ struct thermal_cooling_device { > struct device device; > void *devdata; > const struct thermal_cooling_device_ops *ops; > + int updated; /* 1 if the cooling device does not need update */ + bool updated; > struct list_head instances; > struct list_head node; > }; > Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On ?, 2012-07-19 at 23:39 +0200, Rafael J. Wysocki wrote: > On Thursday, July 19, 2012, Zhang Rui wrote: > > This fixes the problem that a cooling device may be referenced by > > by multiple trip points in multiple thermal zones. > > > > With this patch, we have two stages for updating a thermal zone, > > 1. check if a thermal_instance needs to be updated or not > > 2. update the cooling device, based on the target cooling state > > of all its instances. > > > > Note that, currently, the cooling device is set to the deepest > > cooling state required. > > > > Signed-off-by: Zhang Rui <rui.zhang@intel.com> > > --- > > drivers/thermal/thermal_sys.c | 41 ++++++++++++++++++++++++++++++++++++++--- > > include/linux/thermal.h | 1 + > > 2 files changed, 39 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c > > index 48b2668..803ce94 100644 > > --- a/drivers/thermal/thermal_sys.c > > +++ b/drivers/thermal/thermal_sys.c > > @@ -54,6 +54,7 @@ struct thermal_instance { > > int trip; > > unsigned long upper; /* Highest cooling state for this trip point */ > > unsigned long lower; /* Lowest cooling state for this trip point */ > > + unsigned long target; /* expected cooling state */ > > char attr_name[THERMAL_NAME_LENGTH]; > > struct device_attribute attr; > > struct list_head tz_node; /* node in tz->instances */ > > @@ -853,6 +854,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, > > dev->trip = trip; > > dev->upper = upper; > > dev->lower = lower; > > + dev->target = -1; > > Please define THERMAL_NO_TARGET and use that instead of plain -1. > agreed. > > > > result = get_idr(&tz->idr, &tz->lock, &dev->id); > > if (result) > > @@ -990,6 +992,7 @@ thermal_cooling_device_register(char *type, void *devdata, > > strcpy(cdev->type, type); > > INIT_LIST_HEAD(&cdev->instances); > > cdev->ops = ops; > > + cdev->updated = 1; > > cdev->device.class = &thermal_class; > > cdev->devdata = devdata; > > dev_set_name(&cdev->device, "cooling_device%d", cdev->id); > > @@ -1081,6 +1084,32 @@ void thermal_cooling_device_unregister(struct > > } > > EXPORT_SYMBOL(thermal_cooling_device_unregister); > > > > +static void thermal_zone_do_update(struct thermal_zone_device *tz) > > +{ > > + struct thermal_instance *instance1, *instance2; > > + struct thermal_cooling_device *cdev; > > + int target; > > The 'target' field in the structure is unsigned long. It'd be better to use > the same data type here. > > It would be good to use 'true' and 'false' as the values of 'updated' too. > agreed. > > + > > + list_for_each_entry(instance1, &tz->instances, tz_node) { > > + cdev = instance1->cdev; > > + > > + /* cooling device has already been updated*/ > > + if (cdev->updated) > > + continue; > > + > > + target = 0; > > + /* Make sure cdev enters the deepest cooling state */ > > + list_for_each_entry(instance2, &cdev->instances, cdev_node) { > > + if (instance2->target == -1) > > + continue; > > + if (instance2->target > target) > > + target = instance2->target; > > + } > > + cdev->ops->set_cur_state(cdev, target); > > + cdev->updated = 1; > > + } > > +} > > I would split the function above into two, one that would walk all > instances of the thermal zone and the other, that would walk the > instances for a given device. It would look much cleaner, then. > agreed. thanks, rui -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 48b2668..803ce94 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -54,6 +54,7 @@ struct thermal_instance { int trip; unsigned long upper; /* Highest cooling state for this trip point */ unsigned long lower; /* Lowest cooling state for this trip point */ + unsigned long target; /* expected cooling state */ char attr_name[THERMAL_NAME_LENGTH]; struct device_attribute attr; struct list_head tz_node; /* node in tz->instances */ @@ -853,6 +854,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, dev->trip = trip; dev->upper = upper; dev->lower = lower; + dev->target = -1; result = get_idr(&tz->idr, &tz->lock, &dev->id); if (result) @@ -990,6 +992,7 @@ thermal_cooling_device_register(char *type, void *devdata, strcpy(cdev->type, type); INIT_LIST_HEAD(&cdev->instances); cdev->ops = ops; + cdev->updated = 1; cdev->device.class = &thermal_class; cdev->devdata = devdata; dev_set_name(&cdev->device, "cooling_device%d", cdev->id); @@ -1081,6 +1084,32 @@ void thermal_cooling_device_unregister(struct } EXPORT_SYMBOL(thermal_cooling_device_unregister); +static void thermal_zone_do_update(struct thermal_zone_device *tz) +{ + struct thermal_instance *instance1, *instance2; + struct thermal_cooling_device *cdev; + int target; + + list_for_each_entry(instance1, &tz->instances, tz_node) { + cdev = instance1->cdev; + + /* cooling device has already been updated*/ + if (cdev->updated) + continue; + + target = 0; + /* Make sure cdev enters the deepest cooling state */ + list_for_each_entry(instance2, &cdev->instances, cdev_node) { + if (instance2->target == -1) + continue; + if (instance2->target > target) + target = instance2->target; + } + cdev->ops->set_cur_state(cdev, target); + cdev->updated = 1; + } +} + /* * Cooling algorithm for active trip points * @@ -1127,19 +1156,24 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, cur_state = cur_state > instance->lower ? (cur_state - 1) : instance->lower; } - cdev->ops->set_cur_state(cdev, cur_state); + instance->target = cur_state; + cdev->updated = 0; /* cooling device needs update */ } } else { /* below trip */ list_for_each_entry(instance, &tz->instances, tz_node) { if (instance->trip != trip) continue; + /* Do not use the deacitve thermal instance */ + if (instance->target == -1) + continue; cdev = instance->cdev; cdev->ops->get_cur_state(cdev, &cur_state); cur_state = cur_state > instance->lower ? - (cur_state - 1) : instance->lower; - cdev->ops->set_cur_state(cdev, cur_state); + (cur_state - 1) : -1; + instance->target = cur_state; + cdev->updated = 0; /* cooling device needs update */ } } @@ -1200,6 +1234,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) } } + thermal_zone_do_update(tz); if (tz->forced_passive) thermal_zone_device_passive(tz, temp, tz->forced_passive, THERMAL_TRIPS_NONE); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index d8e069e..604c0f0 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -92,6 +92,7 @@ struct thermal_cooling_device { struct device device; void *devdata; const struct thermal_cooling_device_ops *ops; + int updated; /* 1 if the cooling device does not need update */ struct list_head instances; struct list_head node; };
This fixes the problem that a cooling device may be referenced by by multiple trip points in multiple thermal zones. With this patch, we have two stages for updating a thermal zone, 1. check if a thermal_instance needs to be updated or not 2. update the cooling device, based on the target cooling state of all its instances. Note that, currently, the cooling device is set to the deepest cooling state required. Signed-off-by: Zhang Rui <rui.zhang@intel.com> --- drivers/thermal/thermal_sys.c | 41 ++++++++++++++++++++++++++++++++++++++--- include/linux/thermal.h | 1 + 2 files changed, 39 insertions(+), 3 deletions(-)