Message ID | 1343182273-32096-13-git-send-email-rui.zhang@intel.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
On Wednesday, July 25, 2012, Zhang Rui wrote: > thermal_instance should be referenced by both thermal zone devices > and thermal cooling devices. > > Rename thermal_instance.node to thermal_instance.tz_node in this patch > and thermal_instanace.cdev_node will be introduced in next patch. > > Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl> > --- > drivers/thermal/thermal_sys.c | 20 ++++++++++---------- > 1 file changed, 10 insertions(+), 10 deletions(-) > > diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c > index 5f362e1..b76e55f 100644 > --- a/drivers/thermal/thermal_sys.c > +++ b/drivers/thermal/thermal_sys.c > @@ -56,7 +56,7 @@ struct thermal_instance { > unsigned long lower; /* Lowest cooling state for this trip point */ > char attr_name[THERMAL_NAME_LENGTH]; > struct device_attribute attr; > - struct list_head node; > + struct list_head tz_node; /* node in tz->thermal_instances */ > }; > > static DEFINE_IDR(thermal_tz_idr); > @@ -750,7 +750,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, > /* Heating up? */ > if (trend == THERMAL_TREND_RAISING) { > list_for_each_entry(instance, &tz->thermal_instances, > - node) { > + tz_node) { > if (instance->trip != trip) > continue; > cdev = instance->cdev; > @@ -761,7 +761,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, > } > } else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */ > list_for_each_entry(instance, &tz->thermal_instances, > - node) { > + tz_node) { > if (instance->trip != trip) > continue; > cdev = instance->cdev; > @@ -781,7 +781,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, > * and avoid thrashing around the passive trip point. Note that we > * assume symmetry. > */ > - list_for_each_entry(instance, &tz->thermal_instances, node) { > + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { > if (instance->trip != trip) > continue; > cdev = instance->cdev; > @@ -877,13 +877,13 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, > goto remove_symbol_link; > > mutex_lock(&tz->lock); > - list_for_each_entry(pos, &tz->thermal_instances, node) > + list_for_each_entry(pos, &tz->thermal_instances, tz_node) > if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { > result = -EEXIST; > break; > } > if (!result) > - list_add_tail(&dev->node, &tz->thermal_instances); > + list_add_tail(&dev->tz_node, &tz->thermal_instances); > mutex_unlock(&tz->lock); > > if (!result) > @@ -916,9 +916,9 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, > struct thermal_instance *pos, *next; > > mutex_lock(&tz->lock); > - list_for_each_entry_safe(pos, next, &tz->thermal_instances, node) { > + list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) { > if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { > - list_del(&pos->node); > + list_del(&pos->tz_node); > mutex_unlock(&tz->lock); > goto unbind; > } > @@ -1110,7 +1110,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, > if (temp >= trip_temp) { > thermal_get_trend(tz, trip, &trend); > > - list_for_each_entry(instance, &tz->thermal_instances, node) { > + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { > if (instance->trip != trip) > continue; > > @@ -1129,7 +1129,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, > cdev->ops->set_cur_state(cdev, cur_state); > } > } else { /* below trip */ > - list_for_each_entry(instance, &tz->thermal_instances, node) { > + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { > if (instance->trip != trip) > continue; > > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 5f362e1..b76e55f 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -56,7 +56,7 @@ struct thermal_instance { unsigned long lower; /* Lowest cooling state for this trip point */ char attr_name[THERMAL_NAME_LENGTH]; struct device_attribute attr; - struct list_head node; + struct list_head tz_node; /* node in tz->thermal_instances */ }; static DEFINE_IDR(thermal_tz_idr); @@ -750,7 +750,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, /* Heating up? */ if (trend == THERMAL_TREND_RAISING) { list_for_each_entry(instance, &tz->thermal_instances, - node) { + tz_node) { if (instance->trip != trip) continue; cdev = instance->cdev; @@ -761,7 +761,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, } } else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */ list_for_each_entry(instance, &tz->thermal_instances, - node) { + tz_node) { if (instance->trip != trip) continue; cdev = instance->cdev; @@ -781,7 +781,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz, * and avoid thrashing around the passive trip point. Note that we * assume symmetry. */ - list_for_each_entry(instance, &tz->thermal_instances, node) { + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if (instance->trip != trip) continue; cdev = instance->cdev; @@ -877,13 +877,13 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, goto remove_symbol_link; mutex_lock(&tz->lock); - list_for_each_entry(pos, &tz->thermal_instances, node) + list_for_each_entry(pos, &tz->thermal_instances, tz_node) if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { result = -EEXIST; break; } if (!result) - list_add_tail(&dev->node, &tz->thermal_instances); + list_add_tail(&dev->tz_node, &tz->thermal_instances); mutex_unlock(&tz->lock); if (!result) @@ -916,9 +916,9 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, struct thermal_instance *pos, *next; mutex_lock(&tz->lock); - list_for_each_entry_safe(pos, next, &tz->thermal_instances, node) { + list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) { if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { - list_del(&pos->node); + list_del(&pos->tz_node); mutex_unlock(&tz->lock); goto unbind; } @@ -1110,7 +1110,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, if (temp >= trip_temp) { thermal_get_trend(tz, trip, &trend); - list_for_each_entry(instance, &tz->thermal_instances, node) { + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if (instance->trip != trip) continue; @@ -1129,7 +1129,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, cdev->ops->set_cur_state(cdev, cur_state); } } else { /* below trip */ - list_for_each_entry(instance, &tz->thermal_instances, node) { + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if (instance->trip != trip) continue;
thermal_instance should be referenced by both thermal zone devices and thermal cooling devices. Rename thermal_instance.node to thermal_instance.tz_node in this patch and thermal_instanace.cdev_node will be introduced in next patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> --- drivers/thermal/thermal_sys.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)