diff mbox

[v6,4/7] libata: acpi: set can_power_off for both ODD and HD

Message ID 1346768680-7287-5-git-send-email-aaron.lwe@gmail.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Aaron Lu Sept. 4, 2012, 2:24 p.m. UTC 
From: Aaron Lu <aaron.lu@intel.com>

Hard disk may also be runtime powered off, so set can_power_off flag
for it too if condition satisfies.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
---
 drivers/ata/libata-acpi.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

Comments

Jeff Garzik Sept. 7, 2012, 2:37 a.m. UTC | #1 
On 09/04/2012 10:24 AM, Aaron Lu wrote:
> From: Aaron Lu <aaron.lu@intel.com>
>
> Hard disk may also be runtime powered off, so set can_power_off flag
> for it too if condition satisfies.
>
> Signed-off-by: Aaron Lu <aaron.lu@intel.com>

Acked-by: Jeff Garzik <jgarzik@redhat.com>



--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 64ba43d..6c8f89c 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -1005,7 +1005,7 @@  static void ata_acpi_add_pm_notifier(struct ata_device *dev)
 	if (ACPI_FAILURE(status))
 		return;
 
-	if (dev->sdev->can_power_off) {
+	if (dev->class == ATA_DEV_ATAPI && dev->sdev->can_power_off) {
 		acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
 			ata_acpi_wake_dev, dev);
 		device_set_run_wake(&dev->sdev->sdev_gendev, true);
@@ -1026,7 +1026,7 @@  static void ata_acpi_remove_pm_notifier(struct ata_device *dev)
 	if (ACPI_FAILURE(status))
 		return;
 
-	if (dev->sdev->can_power_off) {
+	if (dev->class == ATA_DEV_ATAPI && dev->sdev->can_power_off) {
 		device_set_run_wake(&dev->sdev->sdev_gendev, false);
 		acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
 			ata_acpi_wake_dev);
@@ -1130,14 +1130,23 @@  static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev,
 
 	/*
 	 * If firmware has _PS3 or _PR3 for this device,
-	 * and this ata ODD device support device attention,
-	 * it means this device can be powered off
+	 * it means this device can be powered off runtime
 	 */
 	states = acpi_dev->power.states;
-	if ((states[ACPI_STATE_D3_HOT].flags.valid ||
-			states[ACPI_STATE_D3_COLD].flags.explicit_set) &&
-			ata_dev->flags & ATA_DFLAG_DA)
-		sdev->can_power_off = 1;
+	if (states[ACPI_STATE_D3_HOT].flags.valid ||
+			states[ACPI_STATE_D3_COLD].flags.explicit_set) {
+		/*
+		 * For ODD, it needs to support device attention or
+		 * it can't be powered up back by user
+		 */
+		if (ata_dev->class == ATA_DEV_ATAPI &&
+				ata_dev->flags & ATA_DFLAG_DA)
+			sdev->can_power_off = 1;
+
+		/* No requirement for hard disk */
+		if (ata_dev->class == ATA_DEV_ATA)
+			sdev->can_power_off = 1;
+	}
 
 	return 0;
 }