| Message ID | 1349869349-8070-9-git-send-email-ulf.hansson@stericsson.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On 10 October 2012 13:42, Ulf Hansson <ulf.hansson@stericsson.com> wrote: > From: Ulf Hansson <ulf.hansson@linaro.org> > > Using the armss clk to update the frequency makes the driver no more > directly dependant on the prmcu API. > > Cc: Rafael J. Wysocki <rjw@sisk.pl> > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> > --- > drivers/cpufreq/db8500-cpufreq.c | 24 ++++++++++++++++-------- > 1 file changed, 16 insertions(+), 8 deletions(-) > > diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c > index dea9a49..4f154bc 100644 > --- a/drivers/cpufreq/db8500-cpufreq.c > +++ b/drivers/cpufreq/db8500-cpufreq.c > @@ -14,10 +14,11 @@ > #include <linux/delay.h> > #include <linux/slab.h> > #include <linux/platform_device.h> > -#include <linux/mfd/dbx500-prcmu.h> > +#include <linux/clk.h> > #include <mach/id.h> > > static struct cpufreq_frequency_table *freq_table; > +static struct clk *armss_clk; > > static struct freq_attr *db8500_cpufreq_attr[] = { > &cpufreq_freq_attr_scaling_available_freqs, > @@ -58,9 +59,9 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy, > for_each_cpu(freqs.cpu, policy->cpus) > cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); > > - /* request the PRCM unit for opp change */ > - if (prcmu_set_arm_opp(freq_table[idx].index)) { > - pr_err("db8500-cpufreq: Failed to set OPP level\n"); > + /* update armss clk frequency */ > + if (clk_set_rate(armss_clk, freq_table[idx].frequency * 1000)) { > + pr_err("db8500-cpufreq: Failed to update armss clk\n"); > return -EINVAL; > } > > @@ -74,16 +75,16 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy, > static unsigned int db8500_cpufreq_getspeed(unsigned int cpu) > { > int i = 0; > - /* request the prcm to get the current ARM opp */ > - int opp = prcmu_get_arm_opp(); > + unsigned long freq = clk_get_rate(armss_clk) / 1000; > > while (freq_table[i].frequency != CPUFREQ_TABLE_END) { > - if (opp == freq_table[i].index) > + if (freq <= freq_table[i].frequency) > return freq_table[i].frequency; > i++; > } > > - /* We could not find a corresponding opp frequency. */ > + /* We could not find a corresponding frequency. */ > + pr_err("db8500-cpufreq: Failed to find cpufreq speed\n"); > return 0; > } > > @@ -92,6 +93,12 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) > int i = 0; > int res; > > + armss_clk = clk_get(NULL, "armss"); > + if (IS_ERR(armss_clk)) { > + pr_err("db8500-cpufreq : Failed to get armss clk\n"); > + return PTR_ERR(armss_clk); > + } > + > pr_info("db8500-cpufreq : Available frequencies:\n"); > while (freq_table[i].frequency != CPUFREQ_TABLE_END) { > pr_info(" %d Mhz\n", freq_table[i].frequency/1000); > @@ -104,6 +111,7 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) > cpufreq_frequency_table_get_attr(freq_table, policy->cpu); > else { > pr_err("db8500-cpufreq : Failed to read policy table\n"); > + clk_put(armss_clk); > return res; > } > > -- > 1.7.10 > Just a kind reminder on this Rafael; trying to collect acks, do you think we can advise Mike to merge this though his clk tree? Kind regards Ulf Hansson -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday, October 26, 2012 10:10:40 AM Ulf Hansson wrote: > On 10 October 2012 13:42, Ulf Hansson <ulf.hansson@stericsson.com> wrote: > > From: Ulf Hansson <ulf.hansson@linaro.org> > > > > Using the armss clk to update the frequency makes the driver no more > > directly dependant on the prmcu API. > > > > Cc: Rafael J. Wysocki <rjw@sisk.pl> > > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> > > --- > > drivers/cpufreq/db8500-cpufreq.c | 24 ++++++++++++++++-------- > > 1 file changed, 16 insertions(+), 8 deletions(-) > > > > diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c > > index dea9a49..4f154bc 100644 > > --- a/drivers/cpufreq/db8500-cpufreq.c > > +++ b/drivers/cpufreq/db8500-cpufreq.c > > @@ -14,10 +14,11 @@ > > #include <linux/delay.h> > > #include <linux/slab.h> > > #include <linux/platform_device.h> > > -#include <linux/mfd/dbx500-prcmu.h> > > +#include <linux/clk.h> > > #include <mach/id.h> > > > > static struct cpufreq_frequency_table *freq_table; > > +static struct clk *armss_clk; > > > > static struct freq_attr *db8500_cpufreq_attr[] = { > > &cpufreq_freq_attr_scaling_available_freqs, > > @@ -58,9 +59,9 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy, > > for_each_cpu(freqs.cpu, policy->cpus) > > cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); > > > > - /* request the PRCM unit for opp change */ > > - if (prcmu_set_arm_opp(freq_table[idx].index)) { > > - pr_err("db8500-cpufreq: Failed to set OPP level\n"); > > + /* update armss clk frequency */ > > + if (clk_set_rate(armss_clk, freq_table[idx].frequency * 1000)) { > > + pr_err("db8500-cpufreq: Failed to update armss clk\n"); > > return -EINVAL; > > } > > > > @@ -74,16 +75,16 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy, > > static unsigned int db8500_cpufreq_getspeed(unsigned int cpu) > > { > > int i = 0; > > - /* request the prcm to get the current ARM opp */ > > - int opp = prcmu_get_arm_opp(); > > + unsigned long freq = clk_get_rate(armss_clk) / 1000; > > > > while (freq_table[i].frequency != CPUFREQ_TABLE_END) { > > - if (opp == freq_table[i].index) > > + if (freq <= freq_table[i].frequency) > > return freq_table[i].frequency; > > i++; > > } > > > > - /* We could not find a corresponding opp frequency. */ > > + /* We could not find a corresponding frequency. */ > > + pr_err("db8500-cpufreq: Failed to find cpufreq speed\n"); > > return 0; > > } > > > > @@ -92,6 +93,12 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) > > int i = 0; > > int res; > > > > + armss_clk = clk_get(NULL, "armss"); > > + if (IS_ERR(armss_clk)) { > > + pr_err("db8500-cpufreq : Failed to get armss clk\n"); > > + return PTR_ERR(armss_clk); > > + } > > + > > pr_info("db8500-cpufreq : Available frequencies:\n"); > > while (freq_table[i].frequency != CPUFREQ_TABLE_END) { > > pr_info(" %d Mhz\n", freq_table[i].frequency/1000); > > @@ -104,6 +111,7 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) > > cpufreq_frequency_table_get_attr(freq_table, policy->cpu); > > else { > > pr_err("db8500-cpufreq : Failed to read policy table\n"); > > + clk_put(armss_clk); > > return res; > > } > > > > -- > > 1.7.10 > > > > Just a kind reminder on this Rafael; trying to collect acks, do you > think we can advise Mike to merge this though his clk tree? Yes, please. Thanks, Rafael
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c index dea9a49..4f154bc 100644 --- a/drivers/cpufreq/db8500-cpufreq.c +++ b/drivers/cpufreq/db8500-cpufreq.c @@ -14,10 +14,11 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/platform_device.h> -#include <linux/mfd/dbx500-prcmu.h> +#include <linux/clk.h> #include <mach/id.h> static struct cpufreq_frequency_table *freq_table; +static struct clk *armss_clk; static struct freq_attr *db8500_cpufreq_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, @@ -58,9 +59,9 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy, for_each_cpu(freqs.cpu, policy->cpus) cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - /* request the PRCM unit for opp change */ - if (prcmu_set_arm_opp(freq_table[idx].index)) { - pr_err("db8500-cpufreq: Failed to set OPP level\n"); + /* update armss clk frequency */ + if (clk_set_rate(armss_clk, freq_table[idx].frequency * 1000)) { + pr_err("db8500-cpufreq: Failed to update armss clk\n"); return -EINVAL; } @@ -74,16 +75,16 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy, static unsigned int db8500_cpufreq_getspeed(unsigned int cpu) { int i = 0; - /* request the prcm to get the current ARM opp */ - int opp = prcmu_get_arm_opp(); + unsigned long freq = clk_get_rate(armss_clk) / 1000; while (freq_table[i].frequency != CPUFREQ_TABLE_END) { - if (opp == freq_table[i].index) + if (freq <= freq_table[i].frequency) return freq_table[i].frequency; i++; } - /* We could not find a corresponding opp frequency. */ + /* We could not find a corresponding frequency. */ + pr_err("db8500-cpufreq: Failed to find cpufreq speed\n"); return 0; } @@ -92,6 +93,12 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) int i = 0; int res; + armss_clk = clk_get(NULL, "armss"); + if (IS_ERR(armss_clk)) { + pr_err("db8500-cpufreq : Failed to get armss clk\n"); + return PTR_ERR(armss_clk); + } + pr_info("db8500-cpufreq : Available frequencies:\n"); while (freq_table[i].frequency != CPUFREQ_TABLE_END) { pr_info(" %d Mhz\n", freq_table[i].frequency/1000); @@ -104,6 +111,7 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) cpufreq_frequency_table_get_attr(freq_table, policy->cpu); else { pr_err("db8500-cpufreq : Failed to read policy table\n"); + clk_put(armss_clk); return res; }